WIDAR Classes
A B C D E F G H I K L M N O P Q R S T U V W X Y

A

abort() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
A method overriding the CrmDiagnostic abort method.
abort() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
A method overriding the CrmDiagnostic abort method.
abort() - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
A method overriding the CrmDiagnostic abort method.
abort() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
The method executed on abort signal of the diagnostic.
abort() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
A method overriding the CrmDiagnostic abort method.
AboutPanel - Class in edu.nrao.widar.gui.widget
A Sub-Panel that shows the 'about' element information of XML data sent to the GUI.
AboutPanel() - Constructor for class edu.nrao.widar.gui.widget.AboutPanel
Creates a new AboutPanel using the default layout.
AboutPanel(String) - Constructor for class edu.nrao.widar.gui.widget.AboutPanel
Creates a new AboutPanel using a specified layout.
acAllStationsMinProd() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
ACCOV_BIT - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
acHalfStMaxProdStartFromLowestSid() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
acHalfStMaxProdStartFromSecond() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
ACTION_COMMAND_REFRESH - Static variable in class edu.nrao.widar.gui.widget.RefreshPanel
A constant representing the ActionEvent's action command String.
ACTION_EVENT_COMMAND - Static variable in class edu.nrao.widar.gui.widget.Clock
A constant representing the ActionEvent's action command String.
ACTION_ID_ADDRESS_CHANGED - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_ADDRESS_CHANGED - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_REFRESH - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_REFRESH - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_SET_HW - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_SET_HW - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_SQUELCH_CHANGED - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_SQUELCH_CHANGED - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_VIEW_COMM - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
A constant representing the ActionEvent's action ID.
ACTION_ID_VIEW_COMM - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
A constant representing the ActionEvent's action ID.
actionButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
actionFont - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
ActionGroup - Class in edu.nrao.widar.gui.widget
ActionGroup.
ActionGroup() - Constructor for class edu.nrao.widar.gui.widget.ActionGroup
Creates a new ActionGroup.
ActionGroup(AbstractButton[]) - Constructor for class edu.nrao.widar.gui.widget.ActionGroup
Creates a new ActionGroup and populates it with an array of AbstractButtons.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.Crm
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
The ActionEvent event handler
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
The ActionEvent event handler
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmDb
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
The ActionEvent handling method
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTable
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
The ActionEvent handling methods
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
The ActionEvent handler
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Receives an ActionEvent, determines the source and performs instructions accordingly.
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
The ActionEvent handling methods
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
The ActionEvent handler
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.vciMapper.VciConfigMapperGui
 
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.vciMapper.VciConfigMapperLogPanel
 
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
actionPerformed(ActionEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.Clock
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.LedElement
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.MainBoardFrame
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.MainFrame
Deprecated.  
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.McbRegisterPanel
Button/Field Processing explained.
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.MultiChooser
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.PasswordDialog
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.RegisterSetBrowserPanel
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileEditor
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.Sandbox2.FlashPath
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.SingleMcbRegisterPanel
Button/Field Processing explained.
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
Button/Field Processing explained.
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.Sound
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.gui.widget.StreamViewer
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.util.HttpClientLink.HttpClientLinkWindow
 
actionPerformed(ActionEvent) - Method in class edu.nrao.widar.util.HttpLink.HttpLinkWindow
 
activate() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Activates the stream reader
activeAlerts - Variable in class ca.nrc.widar.vciMapper.BoardStatus
ConfigName as specified in the active alert.
activeBg - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
activeCorrModelSince() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
activeProcessColumns - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
activeProcessColumns - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
 
activeProcessColumns - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
activeProcessColumns - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabTest
 
activeProcessColumnSort - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
activeProcessColumnSort - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
 
activeProcessColumnSort - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
activeProcessColumnSort - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabTest
 
activeProcessColumnWidths - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
activeProcessColumnWidths - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
 
activeProcessColumnWidths - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
activeProcessColumnWidths - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabTest
 
activeScroll - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
actTriggerToRowString(ActivationTrigger) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
actTriggerToString(ActivationTrigger) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
add(Diagnostic) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Adds the supplied diagnostic XML object to the specified queue
add(String, CmMonitorControl) - Method in class ca.nrc.widar.vciMapper.ControlQueue
Add message to the ControlQueue.
add(PolProductGroup, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
add(AbstractButton) - Method in class edu.nrao.widar.gui.widget.ActionGroup
Adds an component to the group.
add(AbstractButton[]) - Method in class edu.nrao.widar.gui.widget.ActionGroup
Adds an array of components to the group.
add(AbstractButton) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Adds a button to the group.
add(AbstractButton[]) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Adds an array of buttons to the group.
add(JComponent, int, int, int, int, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel.
add(JComponent, int, int, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied ToolTip and automatic sizing.
add(JComponent, int, int, int, int, String, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied font.
add(JComponent, int, int, String, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied font and automatic sizing.
add(JComponent, int, int, String, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label to the left of it.
add(JComponent, int, int, String, String, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label placed in a specified position relative to it.
add(JComponent, int, int, int, int, String, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label to the left of it.
add(JComponent, int, int, int, int, String, String, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label in a specified position relative to it.
add(JComponent, int, int, String, String, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label to its left and specified font.
add(JComponent, int, int, String, String, Font, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label in a specified position and a specified font.
add(JComponent, int, int, int, int, String, String, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label to it left and a specified font.
add(JComponent, int, int, int, int, String, String, Font, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label at a specified position and a specified font.
add(JComponent, int, int, int, int, String, String, Font, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label to its left and a specified font and component name.
add(JComponent, int, int, int, int, String, String, Font, String, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied label at a specified position and a specified font and component name.
addAccOv(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the Accumulator Overflow status bit error count for the specified chip and CCC
addAccOv() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of Accumulator Overflow status bit errors
addAccOv(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of Accumulator Overflow Status Bit Errors involving this chip and CCC
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.Crm
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmDb
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Adds an ActionListener to the ListenerList for this class
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTable
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Adds a listener to the action listener list within this class.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.ActionGroup
Add an ActionListener.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Add an ActionListener.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.Clock
Adds an ActionListener to this Clock.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Adds an ActionListener to this OldServerPanel.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
Adds an ActionListener to this RefreshPanel.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Adds an ActionListener to this ActionListener.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Adds an ActionListener to this ActionListener.
addActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Adds an ActionListener to this ServerPanel.
addArrow(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
Adds a carat type arrow to the table header cell in the direction of the sort
addAscArrow() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
Adds an ascending arrow indicator to the header cell
addBaselineBoard(int, CrmBaselineBoard) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
If all conditions are met, the supplied CrmBaselineBoard object is added to the HashMap for this instance of CrmQuadrant.
addBaselineBoard(BaselineBoard, int, int, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
addBaselineBoard(BaselineBoard, int, int, int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
addBaselineBoardAll(BaselineBoard, int, int, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
addBB(StbDataPath) - Method in class ca.nrc.widar.vciMapper.Station
 
addBdfShapeConfiguration(OutputConfig) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
addBlbTargets(List<BlbTarget>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
addBlRack(int) - Method in class ca.nrc.widar.vciMapper.CorrModel
Create an empty Baseline rack, add it to the list blbRackList and return a reference to the newly created rack.
addBoard(CrmCommon.Crate, Integer, CrmBoard) - Method in class ca.nrc.widar.mccc.crm.CrmRack
Adds a board to this instance of Rack, given the crate and slot location, and the instance of the board itself.
addBoardCfgAndStatusToHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.Station
This method adds station to table.
addBoardCfgAndStatusToHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
addBoardTags(String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Adds surrounding type tags to an XML string which reflect the tags required for this board (baselineBoard or stationBoard)
addButton(AbstractButton, String, int, int, int, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Deprecated. use addComponent instead. If it is a JToggleButton or JButton, addComponent will do the necessary processing to minimize its size.
addCbeDeconfig(SubarrayDeconfig) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
addChoice(String) - Method in class edu.nrao.widar.gui.widget.ChoiceField
 
addComp(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the comparison count for the specified chip and CCC
addComp(int, int, int, int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the comparison count for 2 chip/CCCs (avoids an extra method call
addComp() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of comparisons
addComp(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of total comparisons involving this chip and CCC
addCompletePpStMinPack1(PolarizationProduct, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
One station per row/column.
addComponent(JComponent, String, int, int, int, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel.
addComponent(JComponent, String, int, int, int, int, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied ToolTip.
addComponent(JComponent, String, int, int, int, int, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied Font.
addComponent(JComponent, String, int, int, int, int, String, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied ToolTip and Font.
addComponent(JComponent, String, int, int, int, int, String, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied ToolTip and label.
addComponent(JComponent, String, int, int, int, int, String, String, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Adds a JComponent to this Panel with a specfied ToolTip, label, and Font.
addCrmIssue(CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Adds a single CrmIssue XML object to the table
addCrmIssue(List) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Adds a list of CrmIssue XML objects to the table
addDescArrow() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
Adds a descengin arrow indicator to the header cell
addDiagnostic(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Adds a single Diagnostic XML object to the table, with the default set to sort the table after adding the diagnostic.
addDiagnostic(Diagnostic, boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Adds a single Diagnostic XML object to the table
addDiagnostic(List) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Adds a list of Diagnostic XML objects to the table
addDiagnostic(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Calls a CrmGuiDiagTableModel method which adds a Diagnostic XML object to the current tab active processes table
addDv(int, int, int, int, int, int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the DV comparison error count for 2 chips/CCCs
addDv(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the DV comparison error count for the specified chip and CCC
addDv(int, int, int, int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the DV comparison error count for the specified chip and CCC
addDv() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of DV Comparison Errors
addDv(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of DV Comparison Errors involving this chip and CCC
addedToQueue - Static variable in class ca.nrc.widar.vciMapper.ConfigurationQueue
 
addedToQueue - Static variable in class ca.nrc.widar.vciMapper.ControlQueue
 
addedToQueue - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
addError(String, CrmLog.ErrorLevel) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Add an error XML element to the errorList arraylist with the specified parameters
addError(String, CrmLog.ErrorLevel, Exception) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A convenience method for addError which will incorporate into the message the Exception.getMessage() text from the supplied Exception
addGuiHost(String) - Static method in class ca.nrc.widar.mccc.crm.Crm
Adds a hostname to the GUI hostname list
addHttpLinkCallbackListener(HttpLinkCallbackListener) - Method in class edu.nrao.widar.util.HttpLink
Deprecated. new static queryServer method takes a listener as a parameter. This should never have been this way since we do not want everyone called back for a single caller's comm (not that it would actually happen since it is unlikely that more than one listener would be using the same HttpLink instance.
addLabel(String, int, int, double, Font) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Add a label (JLabel) to this Panel.
addLag(int, int, int, int, int, int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the summary record for the specified chip
addLag(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the LAG comparison error count for the specified chip and CCC
addLag(int, int, int, int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the LAG comparison error count for 2 Chips/CCCs (avoid an extra method call
addLag() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of Lag Comparison Errors
addLag(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of Lag Comparison Errors involving this chip and CCC
addLagChainSegment(LagChainSegment) - Method in class ca.nrc.widar.vciMapper.CbeProductFour
 
addLagChainSegment(LagChainSegment) - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
addMessage(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Creates and adds a Message JAXB XML object to the messageList ArrayList within this object.
addMessage(String) - Method in class edu.nrao.widar.gui.widget.LogPane
 
addNotify() - Method in class edu.nrao.widar.gui.widget.LogPane
 
addOvr(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the Accumulator Overrun status bit error count for the specified chip and CCC
addOvr() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of Accumulator Overrun status bit errors
addOvr(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of Accumulator Overrun Status Bit Errors involving this chip and CCC
addPanel(JPanel, int, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Add a sub-panel (JPanel) to this Panel.
addPipelineConfiguration(PipelineConfig, Spec) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
addRec(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the record comparison count for the specified chip and CCC
addRec() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of records compared
addRec(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of records compared involving this chip and CCC
addRecircCrcError(RecircCrcError) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A method which adds a RecircCrcError JAXB object to the appropriate list for this diagnostic
addRecord(int, int, Integer) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Adds a new record of type Integer to this comparable class.
addRecord(int, int, Long) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Adds a new record of type Long to this comparable class, incrementing the appropriate counters as required
addRecSeries(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
addRecSeries(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
address - Variable in class ca.nrc.widar.vciMapper.BoardStatus
IP address or DNS name to be used by the VCI Mapper for this board
addRxpCrcError(RxpCrcError) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A method which adds an RxpCrcError JAXB object to the appropriate list for this diagnostic
addSpectralWindow(SpectralWindow, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
addSpectralWindow(SpectralWindow, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
addSpectralWindow(double, ArrayList<Integer>, ArrayList<Integer>, SpectralWindow, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
addStation(Station) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
addStation(Station, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Add Station to the Subarray.
addStationBoard(CrmStationBoard) - Method in class ca.nrc.widar.mccc.crm.CrmStation
If all conditions are met, the supplied CrmStationBoard object is added to the HashMap for this instance of CrmStation.
addStbTargets(List<StbTarget>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
addStRack(int) - Method in class ca.nrc.widar.vciMapper.CorrModel
Create an empty Station Board rack, add it to the list stbRackList and return a reference to the newly created rack.
addSubband(int, int, PolarizationType, int, PolarizationType) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
addSubband(int, int, PolarizationType) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
addSubband(int) - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
addSummaryNRecs(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the summary record for the specified chip - see CrmBaselineBoardChip for a definition of the 'summary record'
addSummaryNRecs() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the summary records - For a board with no problems, this number should total to 16 upon completion of a BLB-HST, indicating that records were received for all CCCs
addSummedArray(SummedArray) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
addTargets(List<Target>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
addToConfigQueue - Static variable in class ca.nrc.widar.vciMapper.ConfigurationQueue
 
addToConfigQueue(String, StationHw) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Add message to the ConfigQueue.
addToConfigQueue(String, SubArray) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Add VCI message subArray to ConfigQueue.
addToConfigQueue(String, ActivationTrigger) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Place activationTrigger in Configuration Queue.
addToConfigQueue(String, boolean, ActivationTrigger, SubArray) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Used for 'delete all subarrays'
addToListOfActTriggers(ActivationTrigger) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
addToLog(String) - Static method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
addToMenuBar(Component[]) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
Add one or more additional components to our JMenuBar.
addToQueue(Object) - Method in class ca.nrc.widar.vciMapper.ConfigFromCbeQueue
Add message to the ConfigQueue.
addToStbList(StationBoard, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
Check if StationBoard is already in the list, if not add it.
addTotalCompCount() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the total number of DV/LAG comparisons made
addTrapListener(SnmpTrapManager.SnmpTrapListener) - Method in class edu.nrao.widar.util.SnmpTrapManager
 
addVciMessage(Object) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
addXmlTraffic(XmlTraffic) - Static method in class ca.nrc.widar.mccc.crm.Crm
This method adds an XmlTraffic object to the xmlTrafficList buffer maintained by the CRM
addXSync(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the X-Synchronization status bit error count for the specified chip and CCC
addXSync() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of X-Synchronization status bit errors
addXSync(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of X-Synchronization Status Bit Errors on this chip and CCC
addYSync(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Increments the Y-Synchronization status bit error count for the specified chip and CCC
addYSync() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Increment the number of Y-Synchronization status bit errors
addYSync(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Increment the number of Y-Synchronization Status But Errors on this chip and CCC
adminDisabled - Static variable in class ca.nrc.widar.vciMapper.BoardStatus
 
adminStatus - Variable in class ca.nrc.widar.vciMapper.BoardStatus
Administrative status -set from CRM Report.
adminStatusAsString() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
alert(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_ALERT' status
alertActive - Variable in class ca.nrc.widar.vciMapper.Board
Status of alert board_config_failure.
alertActive - Variable in class ca.nrc.widar.vciMapper.BoardStatus
Status of alert board_config_failure.
alertActive() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
alertConfigFailureCbe - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
alertConfigFailureCmib - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
alertConfigFailureUnknownCmib - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
alertConfigFailureVci - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
alertConfigName - Variable in class ca.nrc.widar.vciMapper.Board
ConfigName as specified in the active alert.
alertSwError - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
all - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
ALL_REGISTERS - Static variable in class edu.nrao.widar.gui.widget.RawRegistersPanel
Specifies that when writing the register values back to hardware to send the values of all the registers (as opposed to only the modified ones.
ALL_SELECTOR - Static variable in class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
allElementsIn(Element, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's of a specified name from a Element Node.
allEnabled - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
allInputsFromSameWafer() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
aModifyVdifStatus() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
analyze(CrmBaselineBoard) - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
A convenience method for 'lagfan' analysis which is used when the caller does not want to invoke an FDiff analysis
analyze(CrmBaselineBoard, boolean, double) - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Performs a 'lagfan' analysis on the data within this BLF File
analyze - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
analyze(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Calling this method initiates the analysis of BLF files associated with a previously completed BLB-HST Diagnsotic.
analyzeAcross() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Method that enacts a comparison when the diagnostic is operating in 'ACROSS' mode.
analyzeAllButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
analyzeCrc() - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
analyzeFileOriginal(BlfFile) - Static method in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
analyzeWithin(int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Method called from the Diagnostic that supplies a code for datapath 0=DP0, 1=DP2, 2=both data paths
analyzeWithinDp(int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Method that calls the comparison within a data path being processed
analyzeWithinFilters(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Enacts the comparison when the diagnostic is in WITHIN compare mode for this comparable.
append(String) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
append(String, String) - Static method in class edu.nrao.widar.gui.widget.FileChooser
Appends a String to a specified file.
append(String, String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Convenience method to append the specified contents to a file on the remote server.
arrowLength - Variable in class edu.nrao.widar.gui.widget.LedPath
 
arrowWidth - Variable in class edu.nrao.widar.gui.widget.LedPath
 
aSrcKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
assignFilterForSBID(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
ASYNC_QUERY_TIME_OUT - Static variable in class ca.nrc.widar.vciMapper.Board
 
asyncQuery(String, DataReadyListener) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous GET method query.
asyncQuery(String, DataReadyListener, int) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous GET method query with a specified Read Timeout.
asyncQuery(String, DataReadyListener, int, int, String) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous GET method query with a specified Read Timeout, callback ID and callback message.
asyncQuery(String, DataReadyListener, DataReadyEvent) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous GET method query with the default Read Timeout and user supplied callback Event (DataReadyEvent).
asyncQuery(String, DataReadyListener, int, DataReadyEvent) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous GET method query with a specified Read Timeout and user supplied callback Event (DataReadyEvent).
asyncQuery(String, String, DataReadyListener) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous POST method query.
asyncQuery(String, String, DataReadyListener, int) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous POST method query with a specified Read Timeout.
asyncQuery(String, String, DataReadyListener, int, int, String) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous POST method query with a specified Read Timeout, callback ID and callback message.
asyncQuery(String, String, DataReadyListener, DataReadyEvent) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous POST method query with the default Read Timeout, and DataReadyEvent.
asyncQuery(String, String, DataReadyListener, int, DataReadyEvent) - Static method in class edu.nrao.widar.util.HttpClientLink
Perform an Asynchronous POST method query with a specified Read Timeout, and DataReadyEvent.
asyncQuery(String, DataReadyListener) - Static method in class edu.nrao.widar.util.HttpLink
Perform an Asynchronous GET method query.
asyncQuery(String, DataReadyListener, int) - Static method in class edu.nrao.widar.util.HttpLink
Perform an Asynchronous GET method query with a specified Read Timeout.
asyncQuery(String, DataReadyListener, int, int, String) - Static method in class edu.nrao.widar.util.HttpLink
Perform an Asynchronous GET method query with a specified Read Timeout, callback ID and callback message.
asyncQuery(String, String, DataReadyListener) - Static method in class edu.nrao.widar.util.HttpLink
Perform an Asynchronous POST method query.
asyncQuery(String, String, DataReadyListener, int) - Static method in class edu.nrao.widar.util.HttpLink
Perform an Asynchronous GET method query with a specified Read Timeout.
asyncQuery(String, String, DataReadyListener, int, int, String) - Static method in class edu.nrao.widar.util.HttpLink
Perform an Asynchronous GET method query with a specified Read Timeout, callback ID and callback message.
autoCorrEnabled() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
aVdifEnable() - Method in class ca.nrc.widar.vciMapper.SummedArray
 

B

BANDS_IN_INPUT_DATA_STREAM - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
BasebandForSpectralWindow - Class in ca.nrc.widar.vciMapper
Baseband for Spectral Window.
BasebandForSpectralWindow(SwBbType) - Constructor for class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
BASEBANDS_PER_ST_BOARD - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
BaselineBoard - Class in ca.nrc.widar.vciMapper
Class BaselineBoard

BaselineBoard(Mlid, int) - Constructor for class ca.nrc.widar.vciMapper.BaselineBoard
Create a Baseline Board with specified Mlid.
BaselineBoard.Side - Enum in ca.nrc.widar.vciMapper
Used to identify Baseline Board "side": X or Y.
BaselineBoard.St1PpOnDiagonal - Enum in ca.nrc.widar.vciMapper
 
BaselineBoard.WaferSet - Enum in ca.nrc.widar.vciMapper
Used to identify set of input wafers: X or Y EVLA configuration uses X wafers for input.
BaselineBoardStatus - Class in ca.nrc.widar.vciMapper
Copyright: National Research Council of Canada and Associated Universities Inc., 2010, 2011, 2012 Class BaselineBoardStatus

BaselineBoardStatus(Mlid, int) - Constructor for class ca.nrc.widar.vciMapper.BaselineBoardStatus
Create a Baseline Board with specified Mlid.
bbBandWidth - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
bbId - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
bbsEnabled(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
be(String) - Method in class edu.nrao.widar.gui.widget.Led
Set the color based on a specified String.
be(String) - Method in class edu.nrao.widar.gui.widget.LedElement
Set the color based on a specified String.
beBlue() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led's color to blue.
beBlue() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led's color to blue.
beBlue() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to turn the LedPath to 'blue'.
beClosedOff() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the switch to the CLOSED_OFF state.
beClosedOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the switch to the CLOSED_ON state.
beGreen() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led's color to green.
beGreen() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led's color to green.
beGreen() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to turn the LedPath to 'green'.
belongsToSubarray() - Method in class ca.nrc.widar.vciMapper.Station
 
belongsToSubarray(int) - Method in class ca.nrc.widar.vciMapper.Subarray
 
belongsToSubarray(String) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
beOff() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led's color to off.
beOff() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led's color to off.
beOff() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to turn the LedPath to 'off'.
beOff() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the switch to the CLOSED_OFF state.
beOff() - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Convenience method to set the switch to the OFF state (selected = false).
beOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the switch to the CLOSED_ON state.
beOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Convenience method to set the switch to the ON state (selected = true).
beOpenOff() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the switch to the OPEN_OFF state.
beOpenOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the switch to the OPEN_ON state.
beOrange() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led's color to orange.
bePink() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led's color to pink.
bePink() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led's color to pink.
bePink() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to turn the LedPath to 'pink'.
beRed() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led's color to red.
beRed() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led's color to red.
beRed() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to turn the LedPath to 'red'.
BetterButtonGroup - Class in edu.nrao.widar.gui.widget
A better ButtonGroup.
BetterButtonGroup() - Constructor for class edu.nrao.widar.gui.widget.BetterButtonGroup
Creates a new BetterButtonGroup.
BetterButtonGroup(AbstractButton[]) - Constructor for class edu.nrao.widar.gui.widget.BetterButtonGroup
Creates a new BetterButtonGroup and populates it with an array of buttons.
beUnknown() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to turn the LedPath to 'unknown'.
bevelBorder - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
beYellow() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led's color to yellow.
beYellow() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led's color to yellow.
beYellow() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to turn the LedPath to 'yellow'.
BIG - Static variable in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
bigLabelFont - Static variable in class edu.nrao.widar.gui.widget.BlankPanel
The default Font used for text that is highlighted.
bitIsSet(long, int) - Static method in class edu.nrao.widar.util.Num
Returns a boolean of the set-state (set (1) = true/ reset (0) =false) of a specified bit in a specified value.
bitIsSet(String, int) - Static method in class edu.nrao.widar.util.Num
Returns a boolean of the state (1=true/0=false) of a specified bit in a specified value String.
bitsString(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Deprecated. Use getMaskedBitsString or getMaskedBitsStringHex instead.
BLACK - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
BLACK - Static variable in class edu.nrao.widar.gui.widget.Led
 
BLACK - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
BLACK - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
BLACK - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
blankColor - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
BlankPanel - Class in edu.nrao.widar.gui.widget
An 'underlying' JPanel that provides convenience methods and custom JComponents to aid in WIDAR GUI screen layouts.
BlankPanel() - Constructor for class edu.nrao.widar.gui.widget.BlankPanel
Creates a BlankPanel.
BlankPanel(int, int) - Constructor for class edu.nrao.widar.gui.widget.BlankPanel
Creates a BlankPanel of a specified size.
BlankPanel(String) - Constructor for class edu.nrao.widar.gui.widget.BlankPanel
Creates a BlankPanel wrapped in a TitledBorder with a specified title.
BlankPanel(int, int, String) - Constructor for class edu.nrao.widar.gui.widget.BlankPanel
Creates a BlankPanel of a specified size wrapped in a TitledBorder with a specified title.
BLB - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
BLB_HST_DEFAULT_CONFIG_BLANKING - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
BLB_HST_DEFAULT_LAG_COLLECTION - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
BLB_HST_DEFAULT_RXP_SYNC - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
BLB_HST_DEFAULT_SYNC_CHECK - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
blbAssigned(int, int, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
blbAssigned(int, int, int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
blbAssignedAnyProd(int, int, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
blbCcEnabled(Mlid, int, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
BlbDataStream - Class in ca.nrc.widar.vciMapper
Class BlbDataStream Baseline Board internal data stream.
BlbDataStream() - Constructor for class ca.nrc.widar.vciMapper.BlbDataStream
 
BlbDataStream(Mlid, int, BaselineBoard.Side, int) - Constructor for class ca.nrc.widar.vciMapper.BlbDataStream
 
BlbDataStream.SampleSize - Enum in ca.nrc.widar.vciMapper
Sample Size of the Baseline Board input data stream.
blbDefault - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
blbEquals - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
blbFlushCfgQueue - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
blbFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
blbFpList - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
blbHstBlfDirectory - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
blbHstDestIpDefault - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
blbHstDestMacDefault - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
blbHstTab - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
blbHstXmlDirectory - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
blbListRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
BlbLtaFpga - Class in ca.nrc.widar.vciMapper
Deprecated. Never used.
BlbLtaFpga() - Constructor for class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
BlbLtaFpga(Mlid, int, int) - Constructor for class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
BlbLtaFpga.BurstModeControl - Enum in ca.nrc.widar.vciMapper
Deprecated.  
blbMessagesBlocked - Static variable in class ca.nrc.widar.vciMapper.BoardStatus
 
blbMlid - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
blbObjFactory - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Object factory for BaselineBoard configuration messages.
blbRcEnabled(Mlid, int, BaselineBoard.Side) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
blbRcEnabled(Mlid, int, BaselineBoard.Side) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
BlbRcInputStream - Class in ca.nrc.widar.vciMapper
Class BlbRcInputStream describes the Baseline Board Recirculation Controller Input Stream.
BlbRcInputStream(Mlid, int, BaselineBoard.Side, int) - Constructor for class ca.nrc.widar.vciMapper.BlbRcInputStream
 
BlbRcInternalStream - Class in ca.nrc.widar.vciMapper
Class BlbRcInternalStream Baseline Board Rec.Cont.
BlbRcInternalStream(Mlid, int, BaselineBoard.Side, int) - Constructor for class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
BlbRcInternalStream.SampleSize - Enum in ca.nrc.widar.vciMapper
Sample Size of the Baseline Board input data stream.
blbReadCfgQueue - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
BlbRecFpga - Class in ca.nrc.widar.vciMapper
Recirculator Controller (RC) is a HW component.
BlbRecFpga() - Constructor for class ca.nrc.widar.vciMapper.BlbRecFpga
 
BlbRecFpga(Mlid, BaselineBoard.Side, int, int) - Constructor for class ca.nrc.widar.vciMapper.BlbRecFpga
 
BlbRecFpga.OutputSource - Enum in ca.nrc.widar.vciMapper
 
BlbRecFpga.RcUseMode - Enum in ca.nrc.widar.vciMapper
 
BlbRxpFpga - Class in ca.nrc.widar.vciMapper
RXP is a HW component.
BlbRxpFpga() - Constructor for class ca.nrc.widar.vciMapper.BlbRxpFpga
 
BlbRxpFpga(Mlid, int) - Constructor for class ca.nrc.widar.vciMapper.BlbRxpFpga
Constructor sets RXP default state.
blbsAssigned() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
blbShortQuery - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
blbXmlConfigList - Variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
BLFFile(String) - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Common constructor method for a CrmBLFFile object, accepting the absolute path and the filename as arguments.
BLINK - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
BLINK - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
blockCfgForBlbs - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable outgoing XML messages.
blockCfgForBlbs() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
blockCfgForCbe - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable outgoing XML messages.
blockCfgForCbe() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
blockCfgForStbs - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable outgoing XML messages.
blockCfgForStbs() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
blockCfgForXbbs - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable outgoing XML messages.
blockCfgForXbbs() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
blockFramesForSubarray(String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Created by SV on 2011-11-25 Block frames in LTA for the specified subarray.
blockFramesForSubarray(String) - Method in class ca.nrc.widar.vciMapper.CorrChip
Created by SV on 2011-11-25 Block frames in LTA if used for the specified subarray.
blockQueryForCrm - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable outgoing XML messages.
blockQueryForCrm() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
blockXAlerts - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable outgoing XML messages.
blockXAlerts() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
blRackList - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
blRacks - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
blRacksToString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
BLUE - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
BLUE - Static variable in class edu.nrao.widar.gui.widget.Led
 
BLUE - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
BLUE - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
BLUE - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
bModifyVdifStatus() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
Board - Class in ca.nrc.widar.vciMapper
Class Board - parameters and methods that are common to Station Board and Baseline Board.
Board() - Constructor for class ca.nrc.widar.vciMapper.Board
No-arg constructor.
Board(int, int, int, Board.Type) - Constructor for class ca.nrc.widar.vciMapper.Board
 
Board(Mlid, Board.Type) - Constructor for class ca.nrc.widar.vciMapper.Board
 
Board.Type - Enum in ca.nrc.widar.vciMapper
 
boardName - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
boards - Variable in class ca.nrc.widar.mccc.crm.CrmRack
 
boardsAccepted - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
boardSchemaName - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
boardsDidNotAccept - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
boardSn - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
BoardStatus - Class in ca.nrc.widar.vciMapper
Class Board - parameters and methods that are common to Station Board and Baseline Board.
BoardStatus(Mlid, Board.Type) - Constructor for class ca.nrc.widar.vciMapper.BoardStatus
 
border() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Return the color to be used for the border of this Baseband type
BOTTOM_LEFT - Static variable in class edu.nrao.widar.gui.widget.HelpLabel
 
BOTTOM_RIGHT - Static variable in class edu.nrao.widar.gui.widget.HelpLabel
 
bottomLabel() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.SwitchMode
Return the SwitchBoard label to be used at the bottom of the panel when this SwitchMode is active
breakIntoMulticastHappyMessages(String) - Static method in class edu.nrao.widar.util.Log
 
bSrcKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
bStreamIsSum() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
btFormat - Variable in class edu.nrao.widar.gui.widget.StreamViewer
 
btOther - Variable in class edu.nrao.widar.gui.widget.StreamViewer
 
buildGetRequestPdu(String, String[]) - Static method in class edu.nrao.widar.util.SnmpUtil
Build an SNMP getRequestPdu.
BurstMode - Class in ca.nrc.widar.vciMapper
class BurstMode
buttonFont - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
bVdifEnable() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
BW_INPUT - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
BW_OUTPUT - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
byteCount - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 

C

ca.nrc.widar.mccc.crm - package ca.nrc.widar.mccc.crm
 
ca.nrc.widar.mccc.crmGui - package ca.nrc.widar.mccc.crmGui
 
ca.nrc.widar.vciMapper - package ca.nrc.widar.vciMapper
 
calculatePacketDelayForVdif() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
calculateVdifPacketDelay(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
CalendarTimer - Class in edu.nrao.widar.util
CalendarTimer is a java.util.Timer that can be set to fire at a specific time and then repeat at a period appropriate to the specified start-time.
CalendarTimer(TimerTask, int[], boolean, String) - Constructor for class edu.nrao.widar.util.CalendarTimer
Creates a CalendarTimer using java.util.Timer's constructor that accepts a single name String parameter and either its schedule method of non-repeating or its scheduleAtFixedRate method if repeating is specified.
canBeCorrelatedWith(BlbDataStream) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
cancelAllTimers() - Method in class edu.nrao.widar.gui.widget.Clock
 
cancelTimer(int) - Method in class edu.nrao.widar.gui.widget.Clock
 
cancelTimers(int) - Method in class edu.nrao.widar.gui.widget.Clock
 
cannotAddToQueue - Static variable in class ca.nrc.widar.vciMapper.ConfigurationQueue
 
cannotAddToQueue - Static variable in class ca.nrc.widar.vciMapper.ControlQueue
 
cannotAddToQueue - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
canRead(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Returns a boolean of the readability of the file .
canWrite(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Returns a boolean of the writeability of the file.
carryForwardChangeToBeTransmitted(BaselineBoard) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(BlbDataStream) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(BlbRecFpga) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(CcCell) - Method in class ca.nrc.widar.vciMapper.CcCell
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(CcQuad) - Method in class ca.nrc.widar.vciMapper.CcQuad
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(CorrChip) - Method in class ca.nrc.widar.vciMapper.CorrChip
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(CorrModel) - Method in class ca.nrc.widar.vciMapper.CorrModel
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(Rack) - Method in class ca.nrc.widar.vciMapper.Rack
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(StationBoard) - Method in class ca.nrc.widar.vciMapper.StationBoard
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(StationRack) - Method in class ca.nrc.widar.vciMapper.StationRack
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(StbDataPath) - Method in class ca.nrc.widar.vciMapper.StbDataPath
This method is called just before (or after) CorrModel becomes active.
carryForwardChangeToBeTransmitted(StbFilter) - Method in class ca.nrc.widar.vciMapper.StbFilter
This method is called just before (or after) CorrModel becomes active.
CBE_WAIT_TIME - Static variable in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
cbeAddress - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
IP address of the Correlator Backend.
cbeAlertActive - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Alert active indicator.
cbeAlertActive() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
CbeBdfShape - Class in ca.nrc.widar.vciMapper
CBE configuration - BDF Shape This class is used to generate CBE configuration.
CbeBdfShape() - Constructor for class ca.nrc.widar.vciMapper.CbeBdfShape
Default constructor - not supported.
CbeBdfShape(String, String, double, ArrayList<Integer>, ArrayList<Integer>) - Constructor for class ca.nrc.widar.vciMapper.CbeBdfShape
Constructor
cbeConfigTransmitted() - Method in class ca.nrc.widar.vciMapper.Subarray
 
cbeConfigTransmitted() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
cbeConfigTransmitted() - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
cbeInputQueue - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Object ConfigFromCbeQueue implements queue for messages received from CBE.
cbeMarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
CbeMessageHandler - Class in ca.nrc.widar.vciMapper
HttpServer Handler for messages received from CBE.
CbeMessageHandler() - Constructor for class ca.nrc.widar.vciMapper.CbeMessageHandler
 
cbeObjFactory - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Object factory for CBE configuration messages.
CbeProductFour - Class in ca.nrc.widar.vciMapper
This class is not used.
CbeProductFour() - Constructor for class ca.nrc.widar.vciMapper.CbeProductFour
 
CbeProductFour(String, String) - Constructor for class ca.nrc.widar.vciMapper.CbeProductFour
 
cbeUnmarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
cbeUrl - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
IP address of the Correlator Backend.
cbfa - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
cbxc - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
CC_ERROR_COMP_THRESHOLD - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
ccBlbAssigned() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
ccBlbUsed(int, int, int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
CCC - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
CCC - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
ccc - Variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
ccc - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
CCC_MAX_ID - Static variable in class ca.nrc.widar.vciMapper.CcCell
 
CCC_MIN_ID - Static variable in class ca.nrc.widar.vciMapper.CcCell
 
CcCell - Class in ca.nrc.widar.vciMapper
Correlator Chip Cell (CcCell) is a hardware component.
CcCell() - Constructor for class ca.nrc.widar.vciMapper.CcCell
 
CcCell(Mlid, int, int, int) - Constructor for class ca.nrc.widar.vciMapper.CcCell
Correlator Chip Cell.
CcCell.Source - Enum in ca.nrc.widar.vciMapper
Correlator Chip Cell can receive input data from one of two CCQ input data streams (primary and secondary) or from adjacent cell.
ccErrorThreshold - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
CCQ_MAX_ID - Static variable in class ca.nrc.widar.vciMapper.CcQuad
 
CCQ_MIN_ID - Static variable in class ca.nrc.widar.vciMapper.CcQuad
 
CcQuad - Class in ca.nrc.widar.vciMapper
CcQuad (Correlator Cell Quad) is a HW component.
CcQuad() - Constructor for class ca.nrc.widar.vciMapper.CcQuad
 
CcQuad(Mlid, int, int, int) - Constructor for class ca.nrc.widar.vciMapper.CcQuad
 
CcQuad.Source - Enum in ca.nrc.widar.vciMapper
Used to identify the source of input data, i.e.
ccsToString() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
cd - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
cdqXml - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
CELL_END_START - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START1_C - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START1_L - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START1_R - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START2_C - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START2_C_B - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START2_L - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START2_L_B - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START2_R - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START2_R_B - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START_C - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START_L - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_END_START_R - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START1_C - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START1_L - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START1_R - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START1_TOP - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START1_TOPL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START1_TOPR - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START1_VC - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START2_C - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START2_C_B - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START2_L - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START2_R - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START2_TOP - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START2_TOP_DSM - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START2_VC - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START_CF1 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START_F1 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START_F2 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START_F3 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
CELL_START_W100_F2 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
cellEndStart2 - Static variable in class ca.nrc.widar.vciMapper.Subarray
 
CELLS_IN_QUAD - Static variable in class ca.nrc.widar.vciMapper.CcQuad
Each CcQuad has 4 cells.
CELLS_PER_CORR_CHIP - Static variable in class ca.nrc.widar.vciMapper.CorrChip
Each Correlator Chip consists of 16 Cells
cellStart2 - Static variable in class ca.nrc.widar.vciMapper.Subarray
 
cfgCcqForSubProductSt4Rq7(int, PolarizationProduct, SubProductType, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Deprecated. 4 stations per row/column, 7-bit correlation, complete product on a single CCQ (four sub-products, each uses one CCC). Set quad for stationPacking=MAX_PACK (4 stations per row/column) and productPacking=MAX_PACK Each quad is used for a different baseline, there is a direct correspondence between Quad ID and input stream ID Assume that CcQuad inputs are already set. Each CCQ produces 4 subproducts for one polarization product.
cfgCompletePp_singleAutoCrossProduct(PolarizationProduct, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Configure complete polarization product for one baseline.
cfgCompletePpStMinPack1(PolarizationProduct, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
One station per row/column.
cfgFailed - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
cfgForSt1(PolarizationProduct, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
cfgInProgress() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
cfgInProgressFor(int, String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
cfgInProgressFor(PolarizationProduct, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
cfgInProgressFor(String, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
cfgInProgressFor(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
cfgInProgressFor(String, BlbRecFpga.RcUseMode) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
cfgProdForFirstDsPair(PolarizationProduct, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
cfgProductsStOnePerRowCross(String, ArrayList<PolarizationProduct>, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
cfgSubband(SubBand) - Method in class ca.nrc.widar.vciMapper.StbFilter
Configure filter for this subband.
CHANGE - Static variable in class ca.nrc.widar.vciMapper.Board
 
CHANGE_CHECK_PERIOD_SECONDS - Static variable in class edu.nrao.widar.util.SystemProperties
 
changeListener - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Thread that listenes to callbacks by HttpLink.
changeOnlyVdifStatusAndMask() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.Board
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.CcCell
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
changeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
checkAndCopyBlbsForCc(PolProductGroup) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
checkAndCopyBlbsForVdif(PolProductGroup) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
checkForInterrupt() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A method which checks for an interrupted excpetion having been thrown by checking the 'stop' flag and throwing an exception if found to be true
chipId - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
ChoiceField - Class in edu.nrao.widar.gui.widget
A JTextField with a drop-down list of choices.
ChoiceField(String[]) - Constructor for class edu.nrao.widar.gui.widget.ChoiceField
Creates a single dimension ChoiceField with CENTER text alignment.
ChoiceField(String[], Font) - Constructor for class edu.nrao.widar.gui.widget.ChoiceField
Creates a single dimension ChoiceField with CENTER text alignment and specified Font.
ChoiceField(String[], int) - Constructor for class edu.nrao.widar.gui.widget.ChoiceField
Creates a single dimension ChoiceField with specified text alignment.
ChoiceField(String[], int, Font) - Constructor for class edu.nrao.widar.gui.widget.ChoiceField
Creates a single dimension ChoiceField with specified text alignment and font.
ChoiceField(String[][]) - Constructor for class edu.nrao.widar.gui.widget.ChoiceField
Creates a two dimension ChoiceField with CENTER text alignment.
ChoiceField(String[][], int) - Constructor for class edu.nrao.widar.gui.widget.ChoiceField
Creates a two dimension ChoiceField with specified text alignment.
choose(String) - Static method in class edu.nrao.widar.gui.widget.FileChooser
Displays a dialog box to allow selection of a file and returns its full URL or local directory name.
chooseShortName(String) - Static method in class edu.nrao.widar.gui.widget.FileChooser
Displays a dialog box to allow selection of a file and returns its short name (no path or URL) The File or its content is not retrieved only its name.
CLASS - Static variable in class ca.nrc.widar.mccc.crm.CrmRack
 
CLASS - Static variable in class ca.nrc.widar.mccc.crm.CrmStationBoard
 
CLASS - Static variable in class ca.nrc.widar.mccc.crm.CrmStationRack
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineRack
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmComm
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpDbHandler
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpDiagnosticHandler
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpHandler
 
className - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpModelHandler
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpServer
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpStateHandler
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpTestHandler
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmQuadrant
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmStreamReader
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTable
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
CLASSNAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
className - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
className - Static variable in class ca.nrc.widar.vciMapper.CbeMessageHandler
 
className - Static variable in class ca.nrc.widar.vciMapper.CcCell
 
className - Static variable in class ca.nrc.widar.vciMapper.CorrChip
 
className - Static variable in class ca.nrc.widar.vciMapper.ProductLagChain
 
className - Variable in class ca.nrc.widar.vciMapper.StationRack
 
className - Variable in class ca.nrc.widar.vciMapper.StbDataPath
 
className - Static variable in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
className - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
className - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGui
 
className - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperLogPanel
 
className - Static variable in class ca.nrc.widar.vciMapper.VciHttpServer
 
className - Static variable in class ca.nrc.widar.vciMapper.VciMessageHandler
 
cleanup() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
The overriding method for cleanup upon completion or abortion of the diagnostic
cleanup() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
The overriding method for cleanup upon completion or abortion of the diagnostic
cleanup() - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Method overrides the cleanup method in the CrmDiagnostic class
cleanup - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
cleanup() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
This method is called upon exit of the diagnostic, either via completion of the task, or via interrupt.
cleanup() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
The overriding method for cleanup upon completion or abortion of the diagnostic
cleanup() - Method in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
The cleanup method executed at the end of the execution method
cleanupForExit() - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
clear() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Clears all storage lists and queues
clearAlert - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
clearAll() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
clearAllButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
clearComponents() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
clearGoodButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
clearListOfActTriggers() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
clearXAlertBoardConfigFailure(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
2011-11-16 SV Generate xAlert - clear board configuration failure

Generate 'clear alert' for all active alerts

clearXAlertCbeConfigFailure(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
2011-10-13 SV Generate clear alert only if it clears the last generated VCI alert.
clearXAlertVciConfigFailure() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
2011-10-13 SV Generate clear alert if VCI alert is already active.
clearXmlTraffic() - Static method in class ca.nrc.widar.mccc.crm.Crm
Clears the current XmlTraffic buffer of all objects
clfr - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
clickOnce() - Method in class edu.nrao.widar.gui.widget.OldServerPanel
 
clickOnce(long) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
 
clickOnce() - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
clickOnce(long) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
client - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
clientHost - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
Clock - Class in edu.nrao.widar.gui.widget
A Sub-Panel that displays the time and provides periodic interrupts.
Clock() - Constructor for class edu.nrao.widar.gui.widget.Clock
Creates a new Clock with default time zones and no timer interrupts.
Clock(long, ActionListener) - Constructor for class edu.nrao.widar.gui.widget.Clock
Creates a Clock with default time zones and a timer with a specified rate and ActionListener.
Clock(SimpleTimeZone[]) - Constructor for class edu.nrao.widar.gui.widget.Clock
Creates a Clock with a specified set of time zones.
Clock(ActionListener) - Constructor for class edu.nrao.widar.gui.widget.Clock
Creates a Clock with a specified ActionListener.
Clock(SimpleTimeZone[], long, ActionListener) - Constructor for class edu.nrao.widar.gui.widget.Clock
Creates a Clock with specified time zones, timer, and ActionListener.
cloneDiagnostic(Diagnostic) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
close() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Attempt to close a connection to the DB
close() - Method in class edu.nrao.widar.util.EmailLogHandler
 
closeAllFiles() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Sends a signal to all registered BlfReceiver objects to cease storing packets and close all open FileOutputStreams
closeButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
CLOSED_OFF - Static variable in class edu.nrao.widar.gui.widget.SafetySwitch
 
CLOSED_ON - Static variable in class edu.nrao.widar.gui.widget.SafetySwitch
 
closeFile() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
Close the current open file that the receiver is writing to for this diagnostic, and set the current file reference variables to null, indicating that no file is currently open to write datagram packets
closeLogFile() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
cm - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
cm - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
CM_HTML_ADDRESS_LOCAL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
CM_HTML_ADDRESS_MCCC - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
cmBlockedCounter - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
cmibReportedErrors - Static variable in class ca.nrc.widar.vciMapper.BoardStatus
 
cmibStateURL - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
cmIdle - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
cmStatusMarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
cmStatusObjFactory - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Object factory for cmStatus.
cmStatusUnmarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
COL_SELECTOR - Static variable in class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
colLabels - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
collectingFrames - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
 
color - Variable in class edu.nrao.widar.gui.widget.LedSized
 
COLOR_REFRESH - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
 
colorForRow(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
Returns a color for the background of a row based on whether the row index is odd or even.
colSizes - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
colSort - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
commaRcEquals - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
commEndTime - Variable in class edu.nrao.widar.util.HttpLinkCallback
Set by System.currentTimeMillis() as the last statement before the callback event is fired.
commStartTime - Variable in class edu.nrao.widar.util.HttpLinkCallback
Set by System.currentTimeMillis() as the first statement of the started communication Thread.
community - Variable in class edu.nrao.widar.util.SnmpUtil.SnmpMessage
 
commWindowIsSelected() - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Returns the Selected Status of the Comm Window Button.
commWindowIsSelected() - Method in class edu.nrao.widar.gui.widget.ServerPanel
Returns the Selected Status of the Comm Window Button.
compAdminDisabled - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
compare(String, String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst.ConfigIndexComparator
 
compare(CrmIssue, CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.AddressCustomComparator
 
compare(Diagnostic, Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.ComponentCustomComparator
 
compare(Diagnostic, Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.DateCustomComparator
 
compare(CrmIssue, CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.DeviceCustomComparator
 
compare(CrmIssue, CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.DiagCustomComparator
 
compare(Diagnostic, Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.IdCustomComparator
 
compare(CrmIssue, CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.IssueCustomComparator
 
compare(CrmIssue, CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.SnCustomComparator
 
compare(Diagnostic, Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.StatusCustomComparator
 
compareDumpTrigParams(PolProductGroup) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
compareIds(int, int, boolean, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Interface Comparable.
compareIds(int, int, boolean, int, int) - Method in class ca.nrc.widar.vciMapper.SummedArray
Interface Comparable.
compareTo(Object) - Method in class ca.nrc.widar.vciMapper.Mlid
Compare numeric IDs only.
compareTo(Object) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Interface Comparable.
compareTo(Object) - Method in class ca.nrc.widar.vciMapper.SummedArray
Interface Comparable.
compErrorCode - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
compLedFpga - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
compLedPower - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
compLedSignals - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
complete - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
complete(Diagnostic) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Signals that the specified diagnostic should be 'completed'.
completeBg - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
completeBlfFile(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Adds a new BLF file name to the cleanup list for this diagnostic
completeBlfFile(BlfFile) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Adds a new BLF file name to the cleanup list for this diagnostic
completeBlfFile(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Adds a new BLF file name to the cleanup list for this diagnostic
completeBlfFile(BlfFile) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Adds a new BLF file name to the cleanup list for this diagnostic
completeBlfFile(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
This method is called when a new BLF file is closed at the reader intended to signal the Diagnostic that a new file has been created and can be added to the processing queue
completeBlfFile(BlfFile) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
completeDiagnostic(int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Generate the final XML report that will be sent to the client with all pertinent information for this diagnostic, including any errors and messages generated during the execution, along with any results and a complete diagnostic status element.
compListRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
compLock - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
compMarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
componentHidden(ComponentEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
ComponentInfo - Class in edu.nrao.widar.util
WIDAR component information.
ComponentInfo() - Constructor for class edu.nrao.widar.util.ComponentInfo
 
componentMoved(ComponentEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
componentResized(ComponentEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
componentShown(ComponentEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
composeCsdReport(CsdErrorReport) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Takes information from the supplied CsdErrorReport JAXB object and forms a string to be returned to the caller with the relevant information.
compTimeStamp - Variable in class ca.nrc.widar.vciMapper.BoardStatus
CMIB status indicators
compUnmarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
computerHostName - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CONFIG_FILE - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
CONFIG_NOCONFIG - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
CONFIG_PAUSE - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
CONFIG_PROBE - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
CONFIG_URL - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
configChange() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
configChange() - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
configChange() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
configChange() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
configChange - Variable in class ca.nrc.widar.vciMapper.Board
True if there is configuration change that should be activated at activationTime..
configChange() - Method in class ca.nrc.widar.vciMapper.Board
 
configChange() - Method in class ca.nrc.widar.vciMapper.CcCell
 
configChange() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
configChange() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
configChange() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
configChange() - Method in class ca.nrc.widar.vciMapper.Station
 
configChange() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
configChange() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
configChange() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
configChange() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
configChange() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
configChange() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
configChange() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Set indicator configChange and configChangeStatus for this object, and for all objects (components) owned by the BaselineBoard.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Unconditional change.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.Board
 
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcQuad
Change configChange, not only for the object CcQuad, but also for all the objects owned by the CcQuad.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CorrChip
Unconditional status change.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CorrModel
Unconditional status change.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.Rack
Set configChange for all boards in the Rack to specified value.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StationBoard
Set indicator configChange and configChangeStatus for this object, and for all objects (components) owned by the StationBoard.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StationRack
 
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
Used when creating a copy of the CorrModel.
configChangeDeepChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
Used when creating a copy of the CorrModel.
configChangeStatus - Variable in class ca.nrc.widar.vciMapper.Board
Status of the configuration change: ToBeTransmitted, Accepted, Rejected, CommunicationFailure, Active Notrelevant is used when configChange=false
configChangeStatus - Variable in class ca.nrc.widar.vciMapper.StationRack
Status for the last attempted transmission of the configuration change: ToBeTransmitted, Accepted, Rejected, CommunicationFailure, Active
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus, String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Updated in December 2012
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Conditional status change.
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
Updated in December 2012
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcQuad
Change indicator "configChangeStatus" only for objects that have specified value of configChange and configChangeStatus.
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CorrChip
Updated in December 2012
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus, String) - Method in class ca.nrc.widar.vciMapper.StationBoard
Updated in December 2012
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
Set configChangeStatus for components where configChange==oldInd and configChangeStatus==oldStatus.
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
configChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
configFileString - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
ConfigFromCbeQueue - Class in ca.nrc.widar.vciMapper
Queue for configuration messages received from CBE.
ConfigFromCbeQueue() - Constructor for class ca.nrc.widar.vciMapper.ConfigFromCbeQueue
 
configName - Variable in class ca.nrc.widar.vciMapper.Board
Config name as specified in the CMIB configuration.
configTitle - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
ConfigurationQueue - Class in ca.nrc.widar.vciMapper
Class Configuration Queue

Class ConfigurationQueue implements configuration queue and metods used to access the queue.

ConfigurationQueue() - Constructor for class ca.nrc.widar.vciMapper.ConfigurationQueue
 
configureBlbSingleForSumAutoCorr(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
configureCcGain(SummedArray) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
configureProducts(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
configureSum(SummedArray, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Configure sum of subarray.
configureSummedArray(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Configure SummedArray.
configureSummedArray(ArrayList<Integer>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
configureVdif(SummedArray, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
configureVdif(SummedArray, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
configureVdifGain(SummedArray) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
configureVdifSingle(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
Configure VDIF for a single data stream (A or B).
configUrlString - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
connect() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Attempt to establish a connection with the database defined in the class variables.
CONNECT_TIMEOUT - Static variable in class edu.nrao.widar.util.HttpClientLink
Default connection time-out pertiod in milliseconds.
CONNECT_TIMEOUT - Static variable in class edu.nrao.widar.util.HttpLink
Default connection time-out pertiod in milliseconds.
connection - Variable in class edu.nrao.widar.util.HttpLinkCallback
HttpURLConnection used for this communication.
console - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
consoleXmlMonitor - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
contains(AbstractButton) - Method in class edu.nrao.widar.gui.widget.ActionGroup
Returns true if the component is in the group,
contains(Object) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns true if the object is a button and is in the group, false otherwise.
contains(AbstractButton) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns true if the button is in the group, false otherwise.
containsColumn(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns a boolean indicating whether the table contains the specified column name
containsColumn(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns a boolean indicating whether the table contains the specified column name
containsColumn(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Returns a boolean indicating whether the table contains the specified column name
containsCrmIssue(Integer) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns an indication of whether the queried CrmIssue ID is in the table
containsDiagnostic(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns an indication of whether the queried diagnostic ID is in the table
controlPanel - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
controlPanel - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
ControlQueue - Class in ca.nrc.widar.vciMapper
Queue for Monitor and Control messages received via VCI.
ControlQueue() - Constructor for class ca.nrc.widar.vciMapper.ControlQueue
 
controlQueue - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Input Queue for Monitor and Control messages.
controlStreamUsed() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
convertBwToInt(String) - Static method in class ca.nrc.widar.vciMapper.StbDataPath
 
convertBwToInt(String) - Static method in class ca.nrc.widar.vciMapper.StbFilter
 
convertStreamToString(InputStream) - Method in class ca.nrc.widar.vciMapper.VciMessageHandler
This method was introduced by WJS - probably for debuging.
copyAllParams(XBarBoardOutputWafer) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
copyBlbAdminStatus(AdminStatus[][][], AdminStatus[][][][], AdminStatus[][][][][], AdminStatus[][][][][]) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
copyDumpTrigParams(PolProductGroup) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
copyListOfActTriggers() - Method in class ca.nrc.widar.vciMapper.CorrModel
Used when VCI messages are received for the activation time which already exists in the actQueue.
copyListOfMessages() - Method in class ca.nrc.widar.vciMapper.CorrModel
Create a copy of the list of mapped messages.
copyStbAdminStatus(AdminStatus[][][], AdminStatus[][][], AdminStatus[][][][], AdminStatus[][][][][], AdminStatus[][][][]) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
copySubarayCbeDeconfigStatus(CorrModel, boolean) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
copySubarrayCbeConfigStatus(CorrModel) - Method in class ca.nrc.widar.vciMapper.CorrModel
This method is called when a new CorrModel is created as a copy of the previous CorrModel.
CORR_4_BITS - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
CORR_7_BITS - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
CORR_EMERLIN - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CORR_TEST_FIXTURE - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CORR_WIDAR - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CorrChip - Class in ca.nrc.widar.vciMapper
This class represents configuration (and status) of a HW component; it is created when a BaselineBoard is created and destroyed when the BaselineBoard is destroyed.
CorrChip() - Constructor for class ca.nrc.widar.vciMapper.CorrChip
 
CorrChip(Mlid, int, int) - Constructor for class ca.nrc.widar.vciMapper.CorrChip
 
CorrChip.BurstModeControl - Enum in ca.nrc.widar.vciMapper
LTA parameter
corrChipAdminStatusAsString(int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
corrMode - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
CorrModel - Class in ca.nrc.widar.vciMapper
Software model of the WIDAR correlator.
CorrModel() - Constructor for class ca.nrc.widar.vciMapper.CorrModel
No arg-constructor.
CorrModel(long) - Constructor for class ca.nrc.widar.vciMapper.CorrModel
Creates a correlator model based on predefined (default) configuration.
CorrModel.CorrModelCfgStatus - Enum in ca.nrc.widar.vciMapper
Used to report (display) configuration status, otherwise not necessary.
CorrStatus - Class in ca.nrc.widar.vciMapper
Administrative and operational status of the WIDAR correlator.
CorrStatus() - Constructor for class ca.nrc.widar.vciMapper.CorrStatus
Default constructor.
corrStatus - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Status of the correlator boards.
counterCurVector - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Counters are maintained to be displayed on GUI screen.
countersInit() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
initialize the counters
countersResetCur() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
set current counters to zero
countersResetTot() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
set total counters to zero
counterTotVector - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Counters are maintained to be displayed on GUI screen.
cq - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
cqExcludeId - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
Crate - Class in ca.nrc.widar.vciMapper
In the same fashion as rack, slot and board, a crate can be created:

a) when a new board is detected in the network

b) when a configuration is received for a board that has not been detected in the network.

Crate() - Constructor for class ca.nrc.widar.vciMapper.Crate
 
Crate(int, int) - Constructor for class ca.nrc.widar.vciMapper.Crate
 
crate - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
crateID - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
crateListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CRATES_IN_RACK - Static variable in class ca.nrc.widar.vciMapper.Rack
 
createAckForMessage(Object, String, List<LogRecord>) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
createAndSendCbeConfig(XMLGregorianCalendar, long, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
createAndSendCbeDeconfig(SubarrayDeconfig, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
Create and send XML message widarCbe - deconfig.
createBaselineBoards(int) - Method in class ca.nrc.widar.vciMapper.CorrModel
This method creates a specified number of Baseline Boards.
createCmMonitorControl() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
createContext(String, HttpHandler) - Method in class edu.nrao.widar.util.HttpServerLink
Used by extender classes to specify their contexts to be added to the server.
createCopy() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
createNackForMessage(Object, String, List<LogRecord>) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
createOutputDirectory() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
createStationBoards(int) - Method in class ca.nrc.widar.vciMapper.CorrModel
Create the specified number of Station Boards.
createSubarray(SubArray, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
Parse VCI message and configure subarray If successful, add new subarray to the list of subarrays.
createVciReject(Object, String, XMLGregorianCalendar, String, List<LogRecord>) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
createXmlMessage(char) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
crit(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_CRIT' status
Crm - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CorrelatorResourceMonitor Class
Crm() - Constructor for class ca.nrc.widar.mccc.crm.Crm
The main constructor for the Crm object.
Crm.CorrMode - Enum in ca.nrc.widar.mccc.crm
Correlator Mode Enumeration
Crm.CrmMode - Enum in ca.nrc.widar.mccc.crm
CRMDb Server Mode Enumeration
CRM_HTTP_PORT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CRM_LAG_FRAME_PORT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmAtLeastOneDisabled - Static variable in class ca.nrc.widar.vciMapper.CorrStatus
This indicator is set while parsing CRM Error Report.
CrmBaselineBoard - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBaselineBoard Class
CrmBaselineBoard(Integer, CrmCommon.Crate, Integer, String, String) - Constructor for class ca.nrc.widar.mccc.crm.CrmBaselineBoard
The constructor.
CrmBaselineBoard(Integer, Integer, Integer, String, String) - Constructor for class ca.nrc.widar.mccc.crm.CrmBaselineBoard
The constructor.
CrmBaselineBoardCcc - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBaselineBoardCcc Class
CrmBaselineBoardCcc(int) - Constructor for class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
The constructor.
CrmBaselineBoardChip - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBaselineBoardChip Class
CrmBaselineBoardChip(int, int) - Constructor for class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
The constructor.
CrmBaselineRack - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBaselineRack Class
CrmBaselineRack(Integer) - Constructor for class ca.nrc.widar.mccc.crm.CrmBaselineRack
Instantiates a Baseline Rack object with the supplied integer ID value
CrmBlbHSDiagnostic - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBlbHSDiagnostic Class
CrmBlbHSDiagnostic(Diagnostic) - Constructor for class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Constructor for the CrmBlbHSDiagnostic class.
CrmBlbHSDiagnosticAnalyzer - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBlbHSDiagnosticAnalyzer Class
CrmBlbHSDiagnosticAnalyzer(Diagnostic) - Constructor for class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Constructor for the CrmBlbHSDiagnosticAnalyzer class.
CrmBlbHSXmlConfig - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBlbHSXmlConfig Class
CrmBlbHSXmlConfig() - Constructor for class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
CrmBLFFile - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBLFFile Class
CrmBLFFile(File) - Constructor for class ca.nrc.widar.mccc.crm.CrmBLFFile
A constructor for a CrmBLFFile object accepting as an argument a File object.
CrmBLFFile(String, String) - Constructor for class ca.nrc.widar.mccc.crm.CrmBLFFile
A constructor for a CrmBLFFile object accepting as arguments the absolute path and filename in string form.
CrmBLFFile(String) - Constructor for class ca.nrc.widar.mccc.crm.CrmBLFFile
A constructor for a CrmBLFFile object accepting as arguments the absolute path and filename in string form.
CrmBlfFileAnalyzer - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmBlfFileAnalyzer Class
CrmBlfFileAnalyzer() - Constructor for class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
Constructor used when default thread pool size is sufficient (DEFAULT = 4)
CrmBlfFileAnalyzer(int) - Constructor for class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
Constructor used when caller requires to specify thread pool size
CrmBoard - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM : CrmBoard Class
CrmBoard(CrmCommon.BoardType, Integer, CrmCommon.Crate, Integer, String, String) - Constructor for class ca.nrc.widar.mccc.crm.CrmBoard
Instantiates a generic Board object with the supplied characteristics
CrmBoard(CrmCommon.BoardType, Integer, Integer, Integer, String, String) - Constructor for class ca.nrc.widar.mccc.crm.CrmBoard
Instantiates a generic Board object with the supplied characteristics.
CrmComm - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmComm Class
CrmComm() - Constructor for class ca.nrc.widar.mccc.crm.CrmComm
A class containing a collection of static XML communication methods intended to facilitate communication between the CRM and WIDAR hardware components.
CrmComm.SmallDataReadyListener - Class in ca.nrc.widar.mccc.crm
A utilitiy sub-class used as a bare bones DataReadyListener for the methods within the CrmComm class.
CrmComm.SmallDataReadyListener() - Constructor for class ca.nrc.widar.mccc.crm.CrmComm.SmallDataReadyListener
Constructor.
CrmCommon - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - Crm GUI: CrmCommon Class
CrmCommon() - Constructor for class ca.nrc.widar.mccc.crm.CrmCommon
 
CrmCommon.Baseband - Enum in ca.nrc.widar.mccc.crm
Baseband Enum This enumeration encodes the various peculiarities of the different Baseband modes that are used to communicate the system status to the user via the GUI
CrmCommon.BoardType - Enum in ca.nrc.widar.mccc.crm
BoardType Enum This enumeration encodes the various types of Boards found within the system
CrmCommon.Crate - Enum in ca.nrc.widar.mccc.crm
Crate Enum This enumeration encodes the various types of Crates found within the system
CrmCommon.RackType - Enum in ca.nrc.widar.mccc.crm
RackType Enum This enumeration encodes the various types of Racks found within the system
CrmCommon.SignalPath - Enum in ca.nrc.widar.mccc.crm
SignalPath Enum This enumeration encodes the various modes of the signal path for the output wafers.
CrmCommon.SwitchMode - Enum in ca.nrc.widar.mccc.crm
SwitchMode Enum This enumeration encodes the various modes in which a switch might reside
CrmCorrelatorModel - Class in ca.nrc.widar.mccc.crm
A class containing all or most of the variables which will define a model that represents the current correlator configuration.
CrmCorrelatorModel(int) - Constructor for class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Generates a static correlator configuration class in which the various correlator elements, their locations and parameters are stored for use in the CRM.
CrmCSDDiagnostic - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmCSDDiagnostic Class
CrmCSDDiagnostic(Diagnostic, boolean) - Constructor for class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
A constructor for the CSD Diagnostic used for testing purposes
CrmCSDDiagnostic(Diagnostic) - Constructor for class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Constructor for the CrmCSDDiagnostic class.
CrmDb - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmDb Class
CrmDb(CrmDbInfo) - Constructor for class ca.nrc.widar.mccc.crm.CrmDb
Common Constructor for the CrmDb Class.
CRMDB_ACTIVE - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CRMDB_ARCHIVE - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CRMDB_HTTP_PORT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CRMDB_ISSUES - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CRMDB_OFF - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CRMDB_ONLY - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmdbStatusRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmDebugModeUpdate() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Sends a post query to the CRM to indicate the XML Monitor and Debug Modes.
CrmDiagnostic - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmDiagnostic Class
CrmDiagnostic(String, Diagnostic) - Constructor for class ca.nrc.widar.mccc.crm.CrmDiagnostic
Class constructor, sets diagnostic flags from information in the Diagnostic XML
CrmDiagnosticQueue2 - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmDiagnosticQueue2 Class
CrmDiagnosticQueue2() - Constructor for class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Construct an instance of CrmDiagnosticQueue, and set the initialization variables appropriately
crmErrorReportTimeStamp - Static variable in class ca.nrc.widar.vciMapper.CorrStatus
Time when the last CRM Error report was received (as string).
CrmGui - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGui Class
CrmGui() - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGui
A Convenience constructor which, when called, initiates the CrmGui with the default IP address for mccctest.evla.nrao.edu as the CRM server.
CrmGui(String) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGui
The constructor for the CrmGui.
CrmGuiBlbHstAnalyze - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiBlbHstAnalyze Class
CrmGuiBlbHstAnalyze(boolean) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
The CrmGuiBlbHstAnalyze constructor used when the class is instantiated in stand-alone mode.
CrmGuiCompSelector - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiComponentSelector Class
CrmGuiCompSelector(int, int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
The CrmGuiCompSelector constructor accepts dimensions for sizing purposes, along with an integer flag indicating the mode (STB or BLB) for the selector
CrmGuiConnect - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiConnect Class
CrmGuiConnect(String) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
The CrmGuiConnect constructor used when the class is instantiated in stand-alone mode.
CrmGuiConnect(Diagnostic) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
The CrmGuiConnect constructor used when called from CrmGui with a diagnostic XML object (containing a CSD diagnostic with a csdResult XML object - the result of a CSD diagnostic)
CrmGuiDbDisplayFrame - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiDbDisplayFrame Class
CrmGuiDbDisplayFrame(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
CrmGuiDbDisplayFrame(int, CrmIssue) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
CrmGuiDbDisplayFrame(int, int, int, CrmIssue) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
CrmGuiDbDisplayFrame(String, int, int, int, CrmIssue) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
Constructor for the CrmGuiDbTab class
CrmGuiDbTab - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmDbGuiTab Class
CrmGuiDbTab(int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Generic constructor for the CrmGuiDbTab class
CrmGuiDbTab(String, int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Constructor for the CrmGuiDbTab class
CrmGuiDbTab.ColumnHeaderListener - Class in ca.nrc.widar.mccc.crmGui
A custom Column Header Listener class that listens for mouse action on the column header elements of the active process table
CrmGuiDbTab.ColumnHeaderListener() - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab.ColumnHeaderListener
 
CrmGuiDbTableModel - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiDbTableModel Class
CrmGuiDbTableModel(String[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
A CrmGuiDbTableModel constructer, where only the column label string array is provided
CrmGuiDbTableModel(String[], List) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
A CrmGuiDbTableModel constructer, where only the column label string array is provided
CrmGuiDbTableModel(String[], Integer[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
A CrmGuiDbTableModel constructer, where only the column label string array is provided
CrmGuiDbTableModel(String[], Integer[], Boolean[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
A CrmGuiDbTableModel constructer, where only the column label string array is provided
CrmGuiDbTableModel(String[], Integer[], Boolean[], List) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
The CrmGuiDbTableModel constructer
CrmGuiDbTestTab - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiTab Class
CrmGuiDbTestTab(int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
 
CrmGuiDbTestTab(String, int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
Constructor for the CrmGuiDbTestTab class
CrmGuiDiagTable - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiDiagTable Class
CrmGuiDiagTable(CrmGuiDiagTableModel) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTable
CrmGuiDiagTable constructor
CrmGuiDiagTableModel - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiDiagTableModel Class
CrmGuiDiagTableModel(String[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
A CrmGuiDiagTableModel constructer, where only the column label string array is provided
CrmGuiDiagTableModel(String[], List) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
A CrmGuiDiagTableModel constructer, where only the column label string array and a lit of Diagnostic objects is provided
CrmGuiDiagTableModel(String[], Integer[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
A CrmGuiDiagTableModel constructer, where only the column label string array and an integer array of column labels are provided
CrmGuiDiagTableModel(String[], Integer[], Boolean[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
A CrmGuiDiagTableModel constructer, where only the column label string array and an integer array of column labels are provided
CrmGuiDiagTableModel(String[], Integer[], Boolean[], List) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
The CrmGuiDiagTableModel constructer
crmGuiFullStateRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CrmGuiOutput - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - Crm GUI: CrmGuiOutput Class
CrmGuiOutput() - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
CrmGuiTab - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiTab Class
CrmGuiTab(String, int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Constructor for the CrmGuiTab class
CrmGuiTab.ColumnHeaderListener - Class in ca.nrc.widar.mccc.crmGui
A custom Column Header Listener class that listens for mouse action on the column header elements of the active process table
CrmGuiTab.ColumnHeaderListener() - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTab.ColumnHeaderListener
 
CrmGuiTabBlbHst - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiTabBlbHst Class
CrmGuiTabBlbHst(int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
The CrmGuiTabBlbHst constructor.
CrmGuiTabBlbHst.ConfigIndexComparator - Class in ca.nrc.widar.mccc.crmGui
 
CrmGuiTabBlbHst.ConfigIndexComparator() - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst.ConfigIndexComparator
 
CrmGuiTabCsd - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM:GUI CrmGuiTabCsd Class
CrmGuiTabCsd(int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
The CrmGuiTabCsd constructor
CrmGuiTable - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiTable Class
CrmGuiTable(CrmGuiTableModel) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTable
CrmGuiTable constructor
CrmGuiTable.CrmGuiTableHeaderRenderer - Class in ca.nrc.widar.mccc.crmGui
A custom table header cell renderer class for the active processes table.
CrmGuiTable.CrmGuiTableHeaderRenderer() - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
 
CrmGuiTableModel - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiDiagTableModel Class
CrmGuiTableModel(String[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
A CrmGuiTableModel constructer, where only the column label string array is provided
CrmGuiTableModel(String[], Integer[], Boolean[]) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
The CrmGuiTableModel constructer
CrmGuiTableModel.AddressCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two CrmIssuess
CrmGuiTableModel.AddressCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.AddressCustomComparator
 
CrmGuiTableModel.ComponentCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two component address strings
CrmGuiTableModel.ComponentCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.ComponentCustomComparator
 
CrmGuiTableModel.DateCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two submitTime dates
CrmGuiTableModel.DateCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.DateCustomComparator
 
CrmGuiTableModel.DeviceCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two CrmIssuess
CrmGuiTableModel.DeviceCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.DeviceCustomComparator
 
CrmGuiTableModel.DiagCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two CrmIssuess
CrmGuiTableModel.DiagCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.DiagCustomComparator
 
CrmGuiTableModel.IdCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two diagnostic IDs
CrmGuiTableModel.IdCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.IdCustomComparator
 
CrmGuiTableModel.IssueCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two CrmIssuess
CrmGuiTableModel.IssueCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.IssueCustomComparator
 
CrmGuiTableModel.SnCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two CrmIssuess
CrmGuiTableModel.SnCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.SnCustomComparator
 
CrmGuiTableModel.StatusCustomComparator - Class in ca.nrc.widar.mccc.crmGui
A custom comparator that compares two diagnostic status strings
CrmGuiTableModel.StatusCustomComparator(int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel.StatusCustomComparator
 
CrmGuiTabStbHst - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiTabStbHst Class
CrmGuiTabStbHst(int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
The CrmGuiTabStbHst constructor.
CrmGuiTabSystem - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM:GUI CrmGuiTabSystem Class
CrmGuiTabSystem(int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
The CrmGuiTabCsd constructor
CrmGuiTabTest - Class in ca.nrc.widar.mccc.crmGui
WIDAR/EVLA - CRM GUI: CrmGuiTabTest Class
CrmGuiTabTest(int, int) - Constructor for class ca.nrc.widar.mccc.crmGui.CrmGuiTabTest
The CrmGuiTabTest constructor.
crmGuiWebStartUrl - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmHost - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
crmHostString - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
CrmHttpDbHandler - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmHttpDbHandler Class
CrmHttpDbHandler() - Constructor for class ca.nrc.widar.mccc.crm.CrmHttpDbHandler
Basic constructor which invokes the super class
CrmHttpDiagnosticHandler - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmHttpDiagnosticHandler Class
CrmHttpDiagnosticHandler() - Constructor for class ca.nrc.widar.mccc.crm.CrmHttpDiagnosticHandler
Basic constructor which invokes the super class
CrmHttpHandler - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmHttpHandler Class
CrmHttpHandler() - Constructor for class ca.nrc.widar.mccc.crm.CrmHttpHandler
Main constructor for the CrmHttpHandler class.
CrmHttpModelHandler - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmHttpModelHandler Class
CrmHttpModelHandler() - Constructor for class ca.nrc.widar.mccc.crm.CrmHttpModelHandler
Basic constructor which invokes the super class
CrmHttpServer - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmHttpServer Class
CrmHttpServer(int) - Constructor for class ca.nrc.widar.mccc.crm.CrmHttpServer
The main constructor.
CrmHttpStateHandler - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmHttpStateHandler Class
CrmHttpStateHandler() - Constructor for class ca.nrc.widar.mccc.crm.CrmHttpStateHandler
Basic constructor which invokes the super class
CrmHttpTestHandler - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmHttpTestHandler Class
CrmHttpTestHandler() - Constructor for class ca.nrc.widar.mccc.crm.CrmHttpTestHandler
Constructor
crmJaxbContext - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
crmJaxbContext - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
crmJaxbContext - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
CrmLagFrame - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmLagFrame Class
CrmLagFrame(CrmBLFFile) - Constructor for class ca.nrc.widar.mccc.crm.CrmLagFrame
The CrmLagFrame constructor.
CrmLagFrameReader - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmLagFrameReader Class
CrmLagFrameReader() - Constructor for class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
CrmLagFrameReceiver - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmLagFrameReceiver Class
CrmLagFrameReceiver(int) - Constructor for class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Construct an instance of CrmLagFrameReceiver, and set the initialization variables appropriately
CrmLagFrameReceiver.BlfReceiver - Class in ca.nrc.widar.mccc.crm
An Inner Class of the CrmLagFrameReceiver which contains the functionality for an individual BlfReceiver for a particular Diagnostic.
CrmLagFrameReceiver.BlfReceiver(CrmDiagnostic) - Constructor for class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
Constructor for a BlfReceiver object.
crmListener - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Thread that listens for callbacks from HttpClientLink for communications between the Config Mapper & the Correlator Resource Manager (CRM).
CrmLog - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmLog Class
CrmLog() - Constructor for class ca.nrc.widar.mccc.crm.CrmLog
Convenience constructor for CRM, allowing the CRM to be instantiated with the default value for crmHost.
CrmLog.ErrorLevel - Enum in ca.nrc.widar.mccc.crm
The ErrorLevel enumeration Currently not entirely sure if all of these levels are used, but they mirror the levels used elsewhere in the MCCC software and Alerts (to some extent) so here they remain.
crmM - Variable in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
crmM - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
crmM - Variable in class ca.nrc.widar.mccc.crm.CrmHttpHandler
 
crmM - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
crmM - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
crmM - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
crmM - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
crmM - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
crmMarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
crmMode - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
crmOF - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
crmOF - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
crmOF - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmOF - Static variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
crmOF - Variable in class ca.nrc.widar.mccc.crm.CrmHttpHandler
 
crmOF - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
crmOF - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
crmOF - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
crmOF - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
crmOF - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
CrmQuadrant - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmQuadrant Class
CrmQuadrant(Integer) - Constructor for class ca.nrc.widar.mccc.crm.CrmQuadrant
The constructor.
CrmQuery - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmQuery Class
CrmQuery(CrmDbQuery) - Constructor for class ca.nrc.widar.mccc.crm.CrmQuery
A convenience constructor which accepts a JAXB CrmQuery object and instantiates the CrmQuery class based on that object.
CrmQuery(String, QueryType) - Constructor for class ca.nrc.widar.mccc.crm.CrmQuery
A convenience constructor which accepts an XML string conforming to the crmDb.xsd XML schema for a CrmQuery object.
crmQueryConstructor(CrmDbQuery) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
The Common Constructor code for the CrmQuery object.
crmQueryConstructor(CrmDbQuery) - Method in class ca.nrc.widar.mccc.crm.CrmQueryDelete
The Common Constructor code for the CrmQueryDelete object.
crmQueryConstructor(CrmDbQuery) - Method in class ca.nrc.widar.mccc.crm.CrmQueryInsert
The Common Constructor code for the CrmQueryInsert object.
crmQueryConstructor(CrmDbQuery) - Method in class ca.nrc.widar.mccc.crm.CrmQuerySelect
The Common Constructor code for the CrmQuerySelect object.
crmQueryConstructor(CrmDbQuery) - Method in class ca.nrc.widar.mccc.crm.CrmQueryUpdate
The Common Constructor code for the CrmQueryUpdate object.
CrmQueryDelete - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmQuery Class
CrmQueryDelete(CrmDbQuery) - Constructor for class ca.nrc.widar.mccc.crm.CrmQueryDelete
Constructor for the class when a CrmDbQuery JAXB XML object is specified.
CrmQueryDelete(String) - Constructor for class ca.nrc.widar.mccc.crm.CrmQueryDelete
Constructor for the class when an SQL formatted String object is specified.
CrmQueryInsert - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmQuery Class
CrmQueryInsert(CrmDbQuery) - Constructor for class ca.nrc.widar.mccc.crm.CrmQueryInsert
Constructor for the class when a CrmDbQuery JAXB XML object is specified.
CrmQueryInsert(String) - Constructor for class ca.nrc.widar.mccc.crm.CrmQueryInsert
Constructor for the class when an SQL formatted String object is specified.
CrmQuerySelect - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmQuery Class
CrmQuerySelect(CrmDbQuery) - Constructor for class ca.nrc.widar.mccc.crm.CrmQuerySelect
Constructor for the class when a CrmDbQuery JAXB XML object is specified.
CrmQuerySelect(String) - Constructor for class ca.nrc.widar.mccc.crm.CrmQuerySelect
Constructor for the class when an SQL formatted String object is specified.
CrmQueryUpdate - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmQuery Class
CrmQueryUpdate(CrmDbQuery) - Constructor for class ca.nrc.widar.mccc.crm.CrmQueryUpdate
Constructor for the class when a CrmDbQuery JAXB XML object is specified.
CrmQueryUpdate(String) - Constructor for class ca.nrc.widar.mccc.crm.CrmQueryUpdate
Constructor for the class when an SQL formatted String object is specified.
CrmRack - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmRack Class
CrmRack(Integer, CrmCommon.RackType) - Constructor for class ca.nrc.widar.mccc.crm.CrmRack
Instantiates a generic CrmRack object with the supplied characteristics.
CrmRecirculatorChip - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmRecirculatorChip Class
CrmRecirculatorChip(int, int) - Constructor for class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
The constructor.
crmReleaseInfoRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmReleaseString - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
crmReportErrors - Static variable in class ca.nrc.widar.vciMapper.CorrStatus
String that list errors detected in the latest received CRM Error Report.
crmShowBlbHstConfigurationXml - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmShowBlbHstReturnXml - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmShowDiagQueueRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
crmShowModelRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CrmState - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmState Class
CrmState() - Constructor for class ca.nrc.widar.mccc.crm.CrmState
A class containing a collection of HTML generating methods intended to describe the current working state of the CRM to an external observer.
CrmStation - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmStation Class
CrmStation(Integer) - Constructor for class ca.nrc.widar.mccc.crm.CrmStation
The constructor.
CrmStationBoard - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmStationBoard Class
CrmStationBoard(Integer, CrmCommon.Crate, Integer, String, String, Integer) - Constructor for class ca.nrc.widar.mccc.crm.CrmStationBoard
The constructor.
CrmStationRack - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmStationRack Class
CrmStationRack(Integer) - Constructor for class ca.nrc.widar.mccc.crm.CrmStationRack
Instantiates a Station Rack object with the supplied integer ID value
crmStatusRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
CrmStbHSComparable - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmStbHSComparable Class
CrmStbHSComparable(String, String, StbHstDpModeType, int) - Constructor for class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Convenience constructor for the CrmStbHSComparable class, allows the caller to omit the dimensions d1 and d2, which are taken to be default as d1=Number of Data Paths (2) and d2=Number of Filter Chips (18)
CrmStbHSComparable(String, String, StbHstDpModeType, int, int, int, int, int) - Constructor for class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Constructor for the CrmStbHSComparable class which returns a class that handles the comparisons and statistics gathering for one 'comparable' within the CrmStbHSDiagnostic
CrmStbHSDiagnostic - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmStbHSDiagnostic Class
CrmStbHSDiagnostic(Diagnostic) - Constructor for class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Constructor for this diagnostic class.
CrmStreamReader - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmStreamReader Class
CrmStreamReader(String, String, int) - Constructor for class ca.nrc.widar.mccc.crm.CrmStreamReader
Constructor for the class.
CrmTestDiagnostic - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - CRM: CrmTestDiagnostic Class
CrmTestDiagnostic(Diagnostic) - Constructor for class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
Constructor for the CrmBlbHSDiagnostic class.
crmU - Variable in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
crmU - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
crmU - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
crmU - Variable in class ca.nrc.widar.mccc.crm.CrmHttpHandler
 
crmU - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
crmU - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
crmU - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
crmUnmarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
crmXmlTrafficRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
csdMode - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
csdTab - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
cSrcKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
currentFilename - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 
currentFOS - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 
currentTimeMillis() - Method in class edu.nrao.widar.gui.widget.Clock
Returns the current time in milliseconds.

D

data - Variable in class edu.nrao.widar.util.DataReadyEvent
 
DATA_PATHS_PER_ST_BOARD - Static variable in class ca.nrc.widar.vciMapper.StationBoard
Number of "data paths" on Station Board
DATA_STREAMS_PER_PATH - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
Number of data streams per baseline board data path (so called rows/columns).
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
The method handling the DataReadyEvents returned to this class
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crm.CrmComm.SmallDataReadyListener
A method which deals with the DataReadyEvent returned from the request
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Handler for replies from asynchronous HTTP requests
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
The method handling the DataReadyEvents returned to this class
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Handler for replies from asynchronous HTTP requests
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crm.CrmHttpTestHandler
Method required to have this class implement DataReadyListeners.
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Handles all DataReadyEvents received from the CRM
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
An event handler for DataReadyEvents.
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
The DataReadyEvent handler for this tab
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
The DataReadyEvent handler for this tab
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
The DataReadyEvent handler for this tab
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
The DataReadyEvent handler for this tab
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
The DataReadyEvent handler
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
dataIsReady(DataReadyEvent) - Method in class ca.nrc.widar.vciMapper.ThreadCrmListener
 
dataIsReady(DataReadyEvent) - Method in interface edu.nrao.widar.util.DataReadyListener
 
dataIsReady(DataReadyEvent) - Method in class edu.nrao.widar.util.HttpClientLinkExample
 
dataPathAdminStatusAsString(int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
DataReadyEvent - Class in edu.nrao.widar.util
An event that indicates that data that was reqested asynchronously is now ready.
DataReadyEvent(Object, String, boolean) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent.
DataReadyEvent(Object, String, boolean, int) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent with a callback ID.
DataReadyEvent(Object, String, boolean, int, String) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent with a callback ID and callback message.
DataReadyEvent(Object, String, boolean, int, String, long, String, Object) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent with specified callback ID, message, miscLong, miscString and miscObject fields.
DataReadyEvent(Object) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent.
DataReadyEvent(Object, int) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent with a callback ID.
DataReadyEvent(Object, int, String) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent with a callback ID and callback message.
DataReadyEvent(Object, int, String, long, String, Object) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Constructs a DataReadyEvent with specified callback ID, message, miscLong, miscString and miscObject values.
DataReadyEvent(Object, String, boolean, Stack<EventListener>, int) - Constructor for class edu.nrao.widar.util.DataReadyEvent
Deprecated. This is too complicated and should not be needed (I think).
DataReadyListener - Interface in edu.nrao.widar.util
The listener interface for receiving a DataReadyEvent.
dataStreamUsed(int) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
dataTypeFactory - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to create class XMLGregorianCalendar
DATE_TIME_DISPLAY_FORMAT_MILLIS - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
DATE_TIME_FORMAT_CFG_NAME - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
DATE_TIME_FORMAT_MILLIS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DATE_TIME_FORMAT_MILLIS - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
DATE_TIME_FORMAT_NO_MILLIS - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
Date & time format : yyyy-MM-dd'T'HH:mm:ss.SSS

Question: Is there need to show time zone (yyyy-MM-dd'T'HH:mm:ss.SSSZ) ? Note: TimeZone format defined by XML Schema is not exactely the same as one used by Java.

dateTimeForCfgName - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
DB_DISPLAY_HEIGHT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DB_DISPLAY_WIDTH - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
dbContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
dbTab - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
dbTableColumns - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
dbTableColumnSort - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
dbTableColumnWidths - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
dbTestTab - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
deactivate() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Deactivates the stream reader using an interrupt, and then closes the stream
debug(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_DEBUG' status
debug(String) - Static method in class edu.nrao.widar.util.Log
Log a DEBUG message.
debug(String) - Static method in class edu.nrao.widar.util.Logger
 
debugLevel - Static variable in class edu.nrao.widar.util.Logger
 
decCounter() - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
Decrement counter each time when DataReadyEvent is received.
decimalFormat - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
decQueryDelayCounter() - Method in class ca.nrc.widar.vciMapper.Board
Decrement "query retransmit delay conter" and return new value.
decrementDiscardCounter() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
decrementWaitTime() - Method in class ca.nrc.widar.vciMapper.Subarray
 
decrementWaitTime() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
decRetDelayCounter() - Method in class ca.nrc.widar.vciMapper.Board
Decrement "retransmit delay conter" and return new value.
DEFAULT_BLF_PROCESSING_PATH - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
DEFAULT_DATABASE - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
DEFAULT_DRIVER - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
Default_DUMPTRIG_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
DEFAULT_FIELD_FONT - Static variable in class edu.nrao.widar.gui.widget.ReadField
ReadField defaults to DEFAULT_FIELD_FONT to promote a consistent look and feel where possible.
DEFAULT_HEIGHT - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
DEFAULT_HEIGHT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
DEFAULT_HEIGHT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
DEFAULT_HEIGHT - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
DEFAULT_HOST - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
DEFAULT_INTERVAL - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
The interval (period between refresh events) that will be used if one is not specified at instantiation.
DEFAULT_INTERVAL - Static variable in class edu.nrao.widar.gui.widget.RefreshPanel
The interval (period between refresh events) that will be used if one is not specified at instantiation.
DEFAULT_INTERVAL - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
The interval (period between refresh events) that will be used if one is not specified at instantiation.
DEFAULT_PASSWORD - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
DEFAULT_POOL_SIZE - Static variable in class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
 
DEFAULT_PORT - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
DEFAULT_STAGE1_SUBBAND - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
DEFAULT_TIME_INTERVAL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Time interval in seconds for the VCI Configuration Mapper internal timer.
When timer expires VCI Configuration Mapper checks:
- configQueue for the messages with expired mapping time.
- activation queue for configuration that should be forwarded to CMIBs.
- and more....
DEFAULT_URL - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
DEFAULT_USERNAME - Static variable in class ca.nrc.widar.mccc.crm.CrmDb
 
DEFAULT_WIDAR_PROPERTIES_URL - Static variable in class edu.nrao.widar.util.SystemProperties
This is the default URL for WIDAR system properties.
DEFAULT_WIDTH - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
DEFAULT_WIDTH - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
DEFAULT_WIDTH - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
DEFAULT_WIDTH - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
DEFAULT_XML_SOURCE_PATH - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
defaultFont - Static variable in class edu.nrao.widar.gui.widget.BlankPanel
The default Font used for most parts of the GUI.
defaultOnly() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
deleteSubarray(Subarray, SubArray, String, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
deleteSubarray(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
deriveEnableCorrelation() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
descFromException(Exception) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
description() - Method in class edu.nrao.widar.util.HttpServerLink.LogUrlFilter
 
descriptor - Variable in class ca.nrc.widar.vciMapper.BoardStatus
This can be used to save status of the component as reported by hardware.
DESCRIPTOR_MAX_LEN - Static variable in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
destAddressChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
deviceId - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
DeviceIdentifier - Class in edu.nrao.widar.util
A class to hold information about a device in the WIDAR correlator.
DeviceIdentifier(String) - Constructor for class edu.nrao.widar.util.DeviceIdentifier
 
DeviceIdentifier(String, String, String, String, String) - Constructor for class edu.nrao.widar.util.DeviceIdentifier
 
DeviceIdentifier(String, String, String, String, String, String) - Constructor for class edu.nrao.widar.util.DeviceIdentifier
 
deviceName - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
deviceSchemaName - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
deviceServerPanel - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
The remoteServerName concept might have worked at one time when the GUI only serviced one board at a time, but won't work now that GUIs can float between several boards.
devListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_ACTION_HALT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_ACTION_NEW_FILE - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_ACTION_SN_CHECK - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_ID_LENGTH - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
DIAG_SYSTEM - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_TYPE_BLB_HST - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_TYPE_BLB_HST_ANALYZE - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_TYPE_CSD - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_TYPE_STB_HST - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
DIAG_TYPE_TEST - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
diagListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
diagnosticContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
diagStatusUpdate - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
diagXml - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
DIRECT - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
DIRECT - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
disable - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
disableCorrelation() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
disabledComponentsInHtmlFormat(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
disabledInCrm - Static variable in class ca.nrc.widar.vciMapper.BoardStatus
 
disableProduct() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
Disable product.
disableProductForBasebands(int, int) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
disableVciSchemaValidation() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
disableWbcProducts() - Method in class ca.nrc.widar.vciMapper.StationBoard
Disable all WBC products on this Station Board.
disableWbcProductsForBasebandPair(int, int) - Method in class ca.nrc.widar.vciMapper.Station
This method is used when 'modify subarray' contains WBC configuration.
disableWbcProductsForBasebandPair(int, int) - Method in class ca.nrc.widar.vciMapper.StationBoard
Used : when modify is received (new configuration verwirites previous configuration when is received Note: configuration change will be transmitted only if product has been enabled.
discardThisModel() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
discardVciMessageCreateSubarray(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
display() - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
This method will display the registers in the Raw Format area of the screen in [address - value] format.
DISPLAY_HOME_LINK - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
displayActiveCorrModel(CorrModelQueryType) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface
displayActiveCorrModelBlbReport() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - Display status change report for Baseline Boards for active configuration.
displayActiveCorrModelStbReport() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - Display status change report for Station Boards for active configuration.
displayActiveCorrModelVciMessage(int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - CorrModel - display VCI message
displayActiveCorrModelXbbReport() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - Display status change report for Cross-Bar Boards for active configuration.
displayActQueueHtml(StringBuilder, String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
Used for CM home page.
displayAdminStatusInHtmlFormat() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
displayAdminStatusInHtmlFormat() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
displayAsRowInHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
displayConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.Subarray
 
displayContentHtml(StringBuilder, boolean, String) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
 
displayCorrModel(CorrModelQueryType, int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface
displayCorrModelBlbReport(int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - CorrModel status change report for Baseline Boards.
displayCorrModelStbReport(int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - CorrModel status change report for Station Boards.
displayCorrModelVciMessage(int, int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - CorrModel - display VCI message
displayCorrModelXbbReport(int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - CorrModel status change report for Cross-Bar Boards.
displayFirstInActQueue(CorrModelQueryType) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface
displayHtmlTime(long) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
displayListOfActTriggers(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
activationTrigger is displayed in the table of Mapped Messages
displayListOfBlbsAndStatus(StringBuilder) - Method in class ca.nrc.widar.vciMapper.Subarray
List of Baseline Boards used for this Subarray in HTML format.
displayListOfStations(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
displayListOfSubarraysForHomePage(StringBuilder, String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
displayNextCorrModel(CorrModelQueryType, int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface
displayPrevCorrModel(CorrModelQueryType, int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface
displayStatesTable() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
displayStatusInHtmlSubarrayTable() - Method in class ca.nrc.widar.vciMapper.Station
 
displayStatusInHtmlSubarrayTable(StringBuilder, StringBuilder) - Method in class ca.nrc.widar.vciMapper.Station
This method is used.
displayStatusInHtmlSubarrayTable(StringBuilder, StringBuilder, StringBuilder, StringBuilder) - Method in class ca.nrc.widar.vciMapper.Station
 
displayStatusInHtmlSubarrayTable() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
displayStatusInHtmlSubarrayTable(StringBuilder, StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
displayStatusInHtmlSubarrayTable(StringBuilder, StringBuilder, StringBuilder, StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
displayStatusInHtmlSubarrayTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
displayTimeMillis - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
displayUsedBlbsAsHtmlTable(StringBuilder, BaselineBoard[][][]) - Method in class ca.nrc.widar.vciMapper.Subarray
Table that displays Quads / BLB Pairs.
displayVciCounters() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
displayVciMessage(int) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
dispose() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
dispose() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
doBoth(HttpServletRequest, HttpServletResponse, String) - Method in class edu.nrao.widar.util.LogServlet
 
doFilter(HttpExchange, Filter.Chain) - Method in class edu.nrao.widar.util.HttpServerLink.LogUrlFilter
 
doGet(HttpServletRequest, HttpServletResponse) - Method in class edu.nrao.widar.util.LogServlet
 
doGet(HttpServletRequest, HttpServletResponse) - Method in class edu.nrao.widar.util.RemoteFileServlet
 
doPopup(String) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
A convenience method for to return whether or not a GUI should display a message it received from a server.
doPopup(String) - Method in class edu.nrao.widar.gui.widget.ServerPanel
A convenience method for to return whether or not a GUI should display a message it received from a server.
doPost(HttpServletRequest, HttpServletResponse) - Method in class edu.nrao.widar.util.LogServlet
 
doPost(HttpServletRequest, HttpServletResponse) - Method in class edu.nrao.widar.util.RemoteFileServlet
 
doubleWaitTime() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
This method is used when a copy of CorrModel is created.
DOWN - Static variable in class edu.nrao.widar.gui.widget.Switch
 
dpFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
drawGrid(Graphics) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Draw a grid on the panel.
drawGrid(Graphics, int, int, int, int, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Draw a grid on the panel.
drl - Static variable in class ca.nrc.widar.mccc.crm.CrmComm
 
DUMPTRIG_LargeBuffer_MAX_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
DUMPTRIG_LargeBuffer_MIN_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
DUMPTRIG_MAX_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
DUMPTRIG_MIN_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
DUMPTRIG_SmallBuffer_MAX_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
DUMPTRIG_SmallBuffer_MIN_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
dumpTrigAssigned() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
dumpTrigForSum() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
dumpTrigFromA(int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
dumpTrigFromA() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
DUMPTRIGS_PER_STATION_BOARD - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
dumpTrigSource - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
DV - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
dvCheck(CrmLagFrame) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Compares the DV Count (Center and Edge) between this lag frame, and the supplied lag frame.
dvCountCenter - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
dvCountEdge - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 

E

edu.nrao.widar.gui.widget - package edu.nrao.widar.gui.widget
Provides a set of reusable graphical components such as LEDs, logos, HelpLabels, various types of custom fields, etc that may be used by the WIDAR GUI packages to save time and help provide a consistent look and feel.
edu.nrao.widar.util - package edu.nrao.widar.util
Provides common utility classes used by the various other packages of the WIDAR software system.
EmailLogHandler - Class in edu.nrao.widar.util
 
EmailLogHandler() - Constructor for class edu.nrao.widar.util.EmailLogHandler
 
emergency(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_EMERG' status
EMPTY_CELL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
EMPTY_CELL_W50 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
emptyBorder - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
emptyStrings - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
enable - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
enabled - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
enabled - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
END_B_F_CELL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
END_B_F_HCELL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
END_BLANK_F_CELL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
END_BODY_TABLE_BR - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
END_CELL_ROW - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
END_F_CELL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
endian - Variable in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
enforceUniqueBbId(List<BaseBand>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Verify that there is one and only one Baseband with the same ID in element stationInputOutput.
enforceUniqueSbAndBlbPairIds(int, int, List<SubBand>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Verify that there is one and only one Subband with the same ID per Baseband pair.
enforceUniqueSbId(int, int, List<SubBand>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Verify that there is one and only one Subband with the same ID in the list of subbands for one Baseband/Baseband pair If there is(are) more than one subband with the same ID, remove that(those) subband(s) from the list.
epochCheck(CrmLagFrame) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Calculates the difference in time (ms) between the ts0 of this lag frame, and the ts0 of the provided lag frame.
equals(Mlid) - Method in class ca.nrc.widar.vciMapper.Mlid
Compares numeric identifiers, names (strings) are ignored.
equals(Object) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Notice: Compares only BBID for basebands A and B and Subband IDs.
equals(Object) - Method in class ca.nrc.widar.vciMapper.SummedArray
Notice: Compares only BBID for basebands A and B and Subband IDs.
err(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_ERR' status
ERROR_MESSAGE - Static variable in class edu.nrao.widar.gui.widget.Util
 
errorIndex - Variable in class edu.nrao.widar.util.SnmpUtil.SnmpMessage
 
errorValue - Variable in class edu.nrao.widar.util.SnmpUtil.SnmpMessage
 
etchedBorder - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
EVLA_NUM_BASELINE_RACKS - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
EVLA_NUM_BL_RACKS - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
EVLA_NUM_ST_RACKS - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
EVLA_NUM_STATION_RACKS - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
evlaAlert(String, String, String, int, String) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert spcifying 'host', 'process', 'id', 'state' and 'value'.
evlaAlert(String, String, String, int, String, String, String, String) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert that is board related (including board subcomponent if applicable).
evlaAlert(String, String, String, int, String, String, String) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert related to a board (and subcomponent if if applicable) and configId.
evlaAlert(String, String, String, int, String, String) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert relating to a configId only.
evlaAlert(String, String, String, int, String, Integer, String, String) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert spcifying SID, BBID and SBID.
evlaAlert(String, String, String, int, String, String, Integer, String, String) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert spcifying configId, SID, BBID and SBID.
evlaAlert(String, String, String, int, String, String, String, int, String, String, String, int, Properties) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert specifying the minimal required parameters and using any non-null optional parameters to override their associated values in the Alert Definition Database.
evlaAlert(String, String, String, int, String, String, String, String, String, Integer, String, String, Integer, String, String, String, Integer, Properties) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert specifying all possible parameters including those normally fetched from the Alert Description Database.
evlaAlert(Properties) - Static method in class edu.nrao.widar.util.Log
Build an EVLA alert where the fields are specified in a java.util.Properties object.
evlaAlert(String, String, String, String) - Static method in class edu.nrao.widar.util.Log
Send an EVLA operator alert over the EVLA's alert multicast channel.
evlaAlert(String, String, String, String, boolean) - Static method in class edu.nrao.widar.util.Log
Send an EVLA operator alert over the EVLA's alert multicast channel using the EVLAMessage element.
evlaInitialize() - Method in class ca.nrc.widar.vciMapper.CorrStatus
Class CorrModel is a model of the correlator, it is used to hold the correlator configuration that should be activated at specific (activation) time.
evlaMonitorData(String, String, Properties) - Static method in class edu.nrao.widar.util.Log
Send WIDAR correlator monitor data to the EVLA Monitor Data Archiving System.
evlaMonitorData(String) - Static method in class edu.nrao.widar.util.Log
Send WIDAR correlator monitor data to the EVLA Monitor Data Archiving System.
exception(CrmLog.ErrorLevel, String, Exception) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
An Exception handling method used by all classes within the CRM package to log and display the particulars of an exception reported within the CRM system.
exception - Variable in class edu.nrao.widar.util.HttpLinkCallback
Will be contain the exception if one occured during the comunication or will be null otherwise.
exceptionToString(Exception) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
execute() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Executes the Baseline Board Hardware Self-Test
execute() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Executes the Baseline Board Hardware Self-Test Analysis on a list of BlfFiles that are provided along with the diagnostic XML
execute() - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
The main execute method of the CrmCSDDiagnostic class.
execute() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
The method called when the Diagnostic run() method is invoked.
execute() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
The execute method of the query - this requires to be overridden
execute() - Method in class ca.nrc.widar.mccc.crm.CrmQueryDelete
Execution method for this DELETE query
execute() - Method in class ca.nrc.widar.mccc.crm.CrmQueryInsert
Execution method for this INSERT query.
execute() - Method in class ca.nrc.widar.mccc.crm.CrmQuerySelect
Execution method for this SELECT query.
execute() - Method in class ca.nrc.widar.mccc.crm.CrmQueryUpdate
Execution method for this UPDATE query
execute() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Executes the Station Board hardware Self-Test
execute() - Method in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
Executes the Test Diagnostic
executeButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
exists(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Returns a boolean of the state of existance of the file.

F

fakeData - Static variable in class edu.nrao.widar.util.SpigotListener
 
FANOUT - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
FANOUT01 - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
FANOUT23 - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
FANOUT45 - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
FANOUT67 - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
FANOUT_SEQUENCE - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
FanTachometer - Class in edu.nrao.widar.gui.widget
 
FanTachometer(int, String) - Constructor for class edu.nrao.widar.gui.widget.FanTachometer
 
FanTachometer(String) - Constructor for class edu.nrao.widar.gui.widget.FanTachometer
 
fgChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
fieldFont - Static variable in class edu.nrao.widar.gui.widget.BlankPanel
The default Font used for most fields.
FileChooser - Class in edu.nrao.widar.gui.widget
A file chooser for WIDAR software components.
FileChooser() - Constructor for class edu.nrao.widar.gui.widget.FileChooser
 
fileName - Variable in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
filterAdminStatusAsString(int, int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
FILTERS_PER_DATA_PATH - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
filtersToStandby(int, int, int) - Method in class ca.nrc.widar.vciMapper.Subarray
 
filterToStandby(int, int) - Method in class ca.nrc.widar.vciMapper.Subarray
 
finalize() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
finalize() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
finalize() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
finalize() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
finalize() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
finalize() - Method in class ca.nrc.widar.vciMapper.Crate
 
finalize() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
finalize() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
finalize() - Method in class ca.nrc.widar.vciMapper.Rack
 
finalize() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
finalize() - Method in class ca.nrc.widar.vciMapper.StationRack
 
finalize() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
finalize() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
finalize() - Method in class ca.nrc.widar.vciMapper.Subarray
 
finalize() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
finalize() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
findFilterForSubband(int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
Find filters for the specified Subband ID.
findFiltersForSubband(int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
Find filters for the specified Subband ID.
findProductsInSubarray(Subarray, List<Map>) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
finish(int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A method executed when the diagnostic finishes naturally
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.Crm
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(int, String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(Object, ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Generates an action event for each class listed in the listener list, except for the noEvent object, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String, int) - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crm.CrmDb
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(int, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String, int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String, CrmLog.ErrorLevel) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Fires an ActionEvent to all listeners that contains an XML table in string format
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(int, String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTable
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTable
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(int, String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(ActionEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(int, String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Generates an action event for each class listed in the listener list, and calls the actionPerformed method in that class.
fireActionEvent(AbstractButton) - Method in class edu.nrao.widar.gui.widget.ActionGroup
Iterate through our list of ActionListeners and call each's actionPerformed() method.
fireActionEvent() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Iterate through our list of ActionListeners and call each's actionPerformed() method.
fireActionEvent(int) - Method in class edu.nrao.widar.gui.widget.Clock
Notify the Listeners of a new event.
fireActionEvent(int) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Notify the HttpLinkCallbackListeners of a new event.
fireActionEvent() - Method in class edu.nrao.widar.gui.widget.RefreshPanel
Notify the HttpLinkCallbackListeners of a new event.
fireActionEvent(int) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Notify the HttpLinkCallbackListeners of a new event.
fireHttpLinkCallbackEvent(HttpLinkCallback) - Method in class edu.nrao.widar.util.HttpLink
 
firePropertyChange(String, Object, Object) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
 
firePropertyChange(String, boolean, boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
 
fireSingleUserActionEvent(ActionListener, int) - Method in class edu.nrao.widar.gui.widget.Clock
 
FIRST_BLB - Static variable in class ca.nrc.widar.vciMapper.SummedArray
 
firstBlbLowerSumToCcArray(SummedArray, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method configures input switch on RC x7 and y7 so that input stream 0 is forwarded to internal stream 1.
firstBlbSetSumFromLowerRxp(SummedArray, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Sum generated on the lower RXP is forwarded to RC7 dataStream 7 (as if was comming from wafer 3-B).
firstStationToAllCcqs() - Method in class ca.nrc.widar.vciMapper.CorrChip
This method sets input as needed for StationPacking=MinPack, One Station per row/column.
fixMarginsAndGetDimension(JComponent, int, int) - Method in class edu.nrao.widar.gui.widget.BlankPanel
 
flagStationData(String, String, String, String, String, String, String, String) - Static method in class edu.nrao.widar.util.Log
Send a Station based flag through the EVLA Alert System.
flash(Color) - Method in class edu.nrao.widar.gui.widget.LedElement
Experimental 'flash' method.
flash(Color, int) - Method in class edu.nrao.widar.gui.widget.Sandbox2.FlashPath
 
flush() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Flushes all Diagnostics from the queue, and halts all currently active diagnostics - this is usually only done if a restart is required.
flush() - Method in class edu.nrao.widar.util.EmailLogHandler
 
flushActQueue() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Flush activation queue, i.e.
flushCmibQueue(StringBuilder) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
Flush CMIB configuration queue.
flushCmibQueue(StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Flush CMIB configuration queue.
flushCmibQueues() - Method in class ca.nrc.widar.vciMapper.CorrModel
Flush input queue for the CMIBs affected by this CorModel.
flushConfigQueue() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Creates a new instance of the configuration queue and discards the old queue.
flushCtrlQueue() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Creates a new instance of the configuration queue and discards the old queue.
flushQueue() - Method in class ca.nrc.widar.vciMapper.ConfigFromCbeQueue
Creates a new instance of the configuration queue and discards the old queue.
flushQueue() - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Creates a new instance of the configuration queue and discards old queue.
flushQueue() - Method in class ca.nrc.widar.vciMapper.ControlQueue
Creates a new instance of the configuration queue and discards the old queue.
FONT - Static variable in class edu.nrao.widar.gui.widget.HelpLabel
 
FONT_BUTTONS - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
Commonly used fonts
FONT_BUTTONS_MAIN - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
Commonly used fonts
FONT_LABELS - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
Commonly used fonts
FONT_PANEL_LABELS - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
Commonly used fonts
FONT_REFRESH - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
 
fontMonoBold10 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoBold12 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoBold14 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoBold16 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoBold8 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoPlain10 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoPlain12 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoPlain14 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoPlain16 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fontMonoPlain8 - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
forAutoCorrOnly() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
forAutoCorrOnly() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
format(LogRecord) - Method in class ca.nrc.widar.vciMapper.VciMapperLogFormatter
 
format(int, int, int, char) - Static method in class edu.nrao.widar.gui.widget.Util
Returns a String of an int formatted with leading padChar's.
format(long, int, int, char) - Static method in class edu.nrao.widar.gui.widget.Util
 
format(LogRecord) - Method in class edu.nrao.widar.util.Log.WidarArchiveFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Log.WidarConsoleFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Log.WidarDebugLogFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Log.WidarSystemLogFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Log.WidarTemperaturesLogFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Log.WidarTrapsLogFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Logger.WidarArchiveFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Logger.WidarConsoleFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Logger.WidarDebugLogFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Logger.WidarOperatorLogFormatter
 
format(LogRecord) - Method in class edu.nrao.widar.util.Logger.WidarSystemLogFormatter
 
format(double, String) - Static method in class edu.nrao.widar.util.Num
Returns a String of a double/float formatted by a specified pattern.
format(long, String) - Static method in class edu.nrao.widar.util.Num
Returns a String of a long/int formatted by a specified pattern.
format(int, int, int, char) - Static method in class edu.nrao.widar.util.Num
Returns a String of an int formatted with leading padChar's.
format(int, int, int, char, boolean) - Static method in class edu.nrao.widar.util.Num
Returns a String of an int formatted with leading padChar's.
format(long, int, int, char) - Static method in class edu.nrao.widar.util.Num
Returns a String of a long formatted with leading padChar's.
format(long, int, int, char, boolean) - Static method in class edu.nrao.widar.util.Num
Returns a String of a long formatted with leading padChar's.
formatBlbAddress(Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Based on provided component coordinates for a BlB within the EVLA correlator, constructs and returns a String describing the location of the component
formatBlbAddress(Integer, Integer, Integer, Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Based on provided component coordinates for a BlB within the EVLA correlator, constructs and returns a String describing the location of the component, including quadrant, subband and wafer information
formatBlbAddressHtml(Integer, Integer, Integer, Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Based on provided component coordinates for a BlB within the EVLA correlator, constructs and returns a String describing the location of the component, including quadrant, subband and wafer ID, surrounded by HTML tags
formatBlbAddressHtml(Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Based on provided component coordinates for a BlB within the EVLA correlator, constructs and returns a String describing the location of the component
formatBlbHstResultsToHtml(Diagnostic) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
A static method that returns a formatted HTML string with the results of the Hardware Self-Test (BLB)
formatBlbHstResultsToString(Diagnostic) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
A static method that returns a formatted string with the results of the Hardware Self-Test (BLB) intended for output to ASCII file
formatCsdTest(CsdModeType, int) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Takes the supplied CSD mode and ID, and returns a formatted string indicating the CSD mode
formatCsdTestHtml(CsdModeType, int) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Takes the supplied CSD mode and ID, and returns a formatted string indicating the CSD mode, surrounded by HTML tags
formatHtmlString(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Supports only ... and ... tags, any other XML will come out just like its passed in.
formatLog(LogRecord) - Static method in class ca.nrc.widar.vciMapper.VciMapperLogFormatter
 
formatSpecial(byte[], int) - Method in class edu.nrao.widar.gui.widget.StreamViewer
 
formatStbAddress(Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Based on provided component coordinates for a StB within the EVLA correlator, constructs and returns a String describing the location of the component
formatStbAddressHtml(Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Based on provided component coordinates for a StB within the EVLA correlator, constructs and returns a String describing the location of the component surrounded by HTML tags
formatStbHstResultsToHtml(Diagnostic) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Returns a String containing the results of an StbHST diagnostic that is formatted in HTML and intended to display to the end user.
formatStbHstResultsToString(Diagnostic) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
Returns a String containing the results of an StbHST diagnostic that is formatted for VT100 display and intended to display to the end user.
formattedArea - Variable in class edu.nrao.widar.gui.widget.RawRegistersPanel
The JTextArea that extending classes will write to for display of the registers formmatted into bits and bit-groups.
forSbPair() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
forSbPair() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
forwardConfiguration(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
Send configuration to Station Boards, X-Bar Switches and Baseline Boards that are affected by the configuration change (i.e.
forwardConfiguration(CorrModel) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Send configuration to the Station Boards, X-Bar Switches and Baseline Boards that are affected by the configuration change (i.e.
forwardedConfiguration() - Method in class ca.nrc.widar.vciMapper.CorrModel
June 2011 SV: not sure if this indicator can be used to determine whether revoke should be performed.
forwardedConfiguration() - Method in class ca.nrc.widar.vciMapper.Subarray
 
frameCount - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
frontPanelFile - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
fShiftChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
fShiftConfigChange - Variable in class ca.nrc.widar.vciMapper.StbDataPath
Indication whether or not frequency shift was specfied in the VCI message.
fType - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 

G

GC_COUNT_MAX - Static variable in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
 
generateQuery(QueryType, String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
generateQuery(QueryType, String, Integer) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
generateXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
genNackNoRefMessage(String, ArrayList<LogRecord>) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
genVciLog(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
get(int) - Static method in enum ca.nrc.widar.mccc.crm.Crm.CorrMode
 
get(int) - Static method in enum ca.nrc.widar.mccc.crm.Crm.CrmMode
 
get(int) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Supplied with an integer value, this method returns the associated enum value
get(int) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.BoardType
Supplied with an integer value, this method returns the associated enum value
get(int) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.Crate
Supplied with an integer value, this method returns the associated enum value
get(int) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Supplied with an integer value, this method returns the associated enum value
get(int) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.SignalPath
Supplied with an integer value, this method returns the associated enum value
get(int) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.SwitchMode
Supplied with an integer value, this method returns the associated enum value
get(int) - Static method in enum ca.nrc.widar.mccc.crm.CrmLog.ErrorLevel
 
get(String) - Static method in class edu.nrao.widar.util.SystemProperties
Safe method for obtaining a System property value.
get(String, String) - Static method in class edu.nrao.widar.util.SystemProperties
Safe method for obtaining a specified System property value with guaranteed value returned.
get(String, int) - Static method in class edu.nrao.widar.util.SystemProperties
Safe method for obtaining a specified System property value of an integer type with a guaranteed value returned.
get(String, float) - Static method in class edu.nrao.widar.util.SystemProperties
Safe method for obtaining a specified System property value of a float type with a guaranteed value returned.
getAbId() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getAbId() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getAbId() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getAbId() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getAbstractButtonCount() - Method in class edu.nrao.widar.gui.widget.ActionGroup
Returns the number of components in the group.
getAccOv(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the Accumulator Overflow status bit error count for the specified chip and CCC
getAccOv() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getAccOv(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getActivationId() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getActiveCorrModel() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getActiveDiagCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of entries currently in the diagActive Hash
getActiveDiagCount(DiagnosticType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of entries of the specified type that are currently in the diagActive Hash
getActiveList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
getActiveSubarrays() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getActString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getActTime() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getActTime() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getActTimeAsDisplayString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getActTimeAsXmlString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getAddress() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getAllElements(Document, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's of a specified name from a Document Node.
getAllElements(Element, String) - Static method in class edu.nrao.widar.util.XmlUtil
Deprecated. use allElementsIn which does not throw an unecessary exception
getAllElements(Element) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of all sub-Elements of a specified Element.
getAnalyzeList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
getAntennaId() - Method in class ca.nrc.widar.vciMapper.Station
 
getAntennaType() - Method in class ca.nrc.widar.vciMapper.Station
 
getApolarization() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
getAsHtmlString(StringBuilder) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getAttributes() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the current version of the query attributes object
getAttributes(Element) - Static method in class edu.nrao.widar.util.XmlUtil
Return an array of org.w3c.dom.Attr's from a specified org.w3c.dom.Element.
getAttributesOnly(CrmDbAttributes) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns a String with all currently stored attributes names in a format that is used when composing an SQL query string.
getAttributesWhoseNamesStartWith(Element, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return an array of org.w3c.dom.Attr's from a specified org.w3c.dom.Element whose names start with a specified String.
getAttributesWithValues(CrmDbAttributes) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns a String with all currently stored attributes and their values in a format that is used when composing an SQL query string.
getAutoCorrAlgorithm() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getAutoCorrDwellTime() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getAutoCorrMask() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getAutoCorrStartFrom() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getBand(Integer, Integer) - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Determines and returns the Baseband ID string to be used in identifying this Baseband type in the mode that is specified
getBand() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getBandWidth() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getBasebandId(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Returns the baseband ID reported at the Rxp Input within this quadrant corresponding to the supplied station ID, subband and datapath values
getBasebandId(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the integer baseband ID for the specified bbPair/wafer/data path
getBasebandId() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Returns the baseband IDs of all configured data paths on this board
getBasebandId(int) - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Returns the baseband ID of the specified data path
getBaselineAsString() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getBaselineBoard(int, CrmCommon.Crate, int) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the Baseline Board object at the specified rack/crate/slot address in the currently defined model
getBaselineBoard(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getBaselineBoard(int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getBaselineBoardCrate(int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Given the sub band index, of a baseline board, this method returns the Crate designation corresponding to its location within the system.
getBaselineBoardGuiTitle(Element) - Static method in class edu.nrao.widar.util.ComponentInfo
Returns a standardized Baseline Board GUI frame title String from a element.
getBaselineBoardList() - Static method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Retrieve a TreeSet containing all CrmBaselineBoard objects
getBaselineBoardQuadrant(int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Given the numerical portion of the baseline rack ID, this method returns the corresponding quadrant ID (zero-based or internal).
getBaselineBoardRack(int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Given the quadrant index, and the subband index of a baseline board, this method returns the numerical part of the baseline board rack ID corresponding to the location of the board within the system.
getBaselineBoards() - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Returns the current HashMap containing all valid references to the BlBs that comprise this 'Quadrant'
getBaselineBoardSlot(int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Given the sub band index, and the data path index of a baseline board, this method returns the slot id corresponding to its location within the system.
getBaselineBoardStatus(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getBaselineBoardStatus(int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getBaselineBoardSubband(int, int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Given the r-c-s coordinates of the baseline rack ID, this method returns the corresponding sub band ID The formula to convert board location into sub band ID involves physical location and connection in and amongst baseline racks.
getBaselineBoardSubband(int, CrmCommon.Crate, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getBB(int) - Method in class ca.nrc.widar.vciMapper.Station
Note: Returns the Baseband, not a copy of the Baseband.
getBbAId() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
getBbBId() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
getBbId(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Returns the Baseband ID stored for the specified data channel, or -1 if the data channel ID is out of range.
getBbid() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getBbid() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getBbid() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getBBID() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getBBID() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getBbidA() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getBbidB() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getBbidForA() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getBbidForA() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getBbidForA() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getBbidForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getBbidForB() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getBbidForB() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getBbidForB() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getBbidForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getBbidForC() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getBbidForStream(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
Return BBID for the specified dataStream.
getBbPairs() - Method in class ca.nrc.widar.vciMapper.Station
 
getBdfShapeId() - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
getBits(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Deprecated. Use getMaskedVal instead
getBits(int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Deprecated. Use getMaskedVal instead
getBitsString(String, int, int, int, int, char) - Static method in class edu.nrao.widar.gui.widget.Util
Deprecated. Use getMaskedValString instead.
getBitsString(int, int, int, int, char) - Static method in class edu.nrao.widar.gui.widget.Util
Deprecated. Use getMaskedValString instead.
getBitsString(int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Deprecated. Use getMaskedBitsString instead.
getBitState(long, int) - Static method in class edu.nrao.widar.util.Num
Deprecated. use bitIsSet instead
getBitState(String, int) - Static method in class edu.nrao.widar.util.Num
Deprecated. use bitIsSet instead
getBlb() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Returns a reference pointer to the CrmBaselineBoard object on which this Diagnostic is operating
getBlb() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Returns a reference pointer to the CrmBaselineBoard object on which this Diagnostic is operating
getBlb() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
getBlb1(BaselineBoard) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getBlbConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.CorrModel
Check all the Baseline Boards and derive overall configuration change status.
getBlbDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Creates and returns a Vector of Diagnostic XML objects based on the current configuration of components within the tab.
getBlbFromQuad(int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getBlbIdsAsString() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getBlbListXml() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the BlbList XML object which contains a frontPanel XMl element for each Baseline Board component within the model
getBlbMlidAsString() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getBlbReturnState(String) - Static method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Returns a BaselineBoard XML that, when sent to a baseline board, will cease all correlation and data generation functions of the board, putting the board into a 'standby' mode
getBlbStatusFromQuad(int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getBlbWafer() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getBlfDirectory() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Returns a File object where the BLF files generated by the CrmLagFrameReceiver are stored.
getBlfDirectory() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Returns a File object where the BLF files generated by the CrmLagFrameReceiver are stored.
getBlfDirectory() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A request for the directory pointer where BLF files are stored meant to be overridden, returns null if it is not.
getBlockSize() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getBmBlankPeriod() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getBmBlankPeriod() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getBmDuration() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getBmDuration() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getBmEpoch() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getBmEpoch() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getBmMode() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getBmModeType() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getBoard(CrmCommon.Crate, Integer) - Method in class ca.nrc.widar.mccc.crm.CrmRack
Returns a reference to the board currently in the specified location within the rack.
getBoard(int) - Method in class ca.nrc.widar.vciMapper.Crate
 
getBoard(int, int) - Method in class ca.nrc.widar.vciMapper.Rack
 
getBoard(Mlid) - Method in class ca.nrc.widar.vciMapper.Rack
 
getBoardId() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getBoardIdAsString() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getBoardIdAsString() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
getBoardIdAsString() - Method in class ca.nrc.widar.vciMapper.Board
 
getBoardIdAsString() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getBoardIdAsString() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
getBoardIpAddress(String) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the IP Address for the component specified board S/N in the currently defined model
getBoardLocation() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the board location in the much-used r-c-s format
getBoardLocation() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the Station ID associated with this Board.
getBoardLocation() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Return the board location identifier string (in the form r-c-s)
getBoardsAsList() - Method in class ca.nrc.widar.vciMapper.Crate
 
getBoardsAsList() - Method in class ca.nrc.widar.vciMapper.Rack
Returns all boards in the rack as a list of objects
getBoardStatus(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getBoundsForLocation(int, int) - Method in class edu.nrao.widar.gui.widget.RotatableTextPanel
Returns the bounds of this RotatableTextPanel at a specified location.
getBpolarization() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
getButtonCount() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the number of buttons in the group.
getButtonIndex(AbstractButton) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the index of a specified button.
getCallback() - Method in class edu.nrao.widar.util.HttpLinkCallbackEvent
Returns an HttpLinkCallback containing information about the communication whose completion caused this event.
getCallbackId() - Method in class edu.nrao.widar.util.DataReadyEvent
Returns the callbackId associated with this event.
getCallbackMessage() - Method in class edu.nrao.widar.util.DataReadyEvent
Returns the callbackMessage associated with this event.
getCallbackMiscLong() - Method in class edu.nrao.widar.util.DataReadyEvent
Returns the callbackMiscLong associated with this event.
getCallbackMiscObject() - Method in class edu.nrao.widar.util.DataReadyEvent
Returns the callbackMiscObject associated with this event.
getCallbackMiscString() - Method in class edu.nrao.widar.util.DataReadyEvent
Returns the callbackMiscString associated with this event.
getCbeCfgStatusAsHtml(StringBuilder) - Method in class ca.nrc.widar.vciMapper.Subarray
 
getCbeCfgTimeToComplete() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getCbeCfgTimeToCompleteAsString() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getCbeCfgTransmittedAt() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getCbeConfigFor4BitProducts(String, List<Prd4>, ConcurrentHashMap<Integer, ProductLagChain>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Get JAXB configuration for products as a list of XML elements prd4.
getCbeConfigFor4BitProducts(String, List<Prd4>, ConcurrentHashMap<Integer, ProductLagChain>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Get JAXB configuration for products as a list of XML elements prd4.
getCbeConfigFor4BitProducts(List<Prd4>, ConcurrentHashMap<Integer, ProductLagChain>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Get JAXB configuration for products as a list of XML elements prd4.
getCbeConfigFor7BitProducts(String, List<Prd7>, ConcurrentHashMap<Integer, ProductLagChain>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Get JAXB configuration for products as a list of XML elements prd4 or prd7.
getCbeConfigFor7BitProducts(String, List<Prd7>, ConcurrentHashMap<Integer, ProductLagChain>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Get JAXB configuration for products as a list of XML elements prd4 or prd7.
getCbeConfigFor7BitProducts(List<Prd7>, ConcurrentHashMap<Integer, ProductLagChain>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Get JAXB configuration for products as a list of XML elements prd7.
getCbeConfigForAutoCorrMode(String, List<Prd4>, ConcurrentHashMap<Integer, ProductLagChain>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Get JAXB configuration for products as a list of XML elements prd4 or prd7.
getCbeConfigForProducts(InputConfig, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
getCbeConfigStatus() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getCbeConfigStatus() - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
getCbeConfigStatusObject() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getCbeIntegFactor() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getCbeIntegFactor() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCbeIntegrationTime() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Get total CBE integration time.
getCbeIntegrationTime() - Method in class ca.nrc.widar.vciMapper.SummedArray
Get total CBE integration time.
getCbeRespReceivedAt() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getCbeXmlAsString(Object) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getCcAgcEnabled() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCcAgcRms() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCcCell(int) - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getCcCell(int) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getCccFrameAsXml() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getCccModel() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the state of the CCC Model within this Baseline Board object.
getCcErrorThreshold() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Returns the value of the ccErrorThreshold variable from this diagnostic
getCcErrorThreshold() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Returns the value of the ccErrorThreshold variable from this diagnostic
getCcErrorThreshold() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
getCcErrorThreshold() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getCcErrorThreshold() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current lag comparison threshold value
getCcGain() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCcIntegFactor() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getCcIntegFactor() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getCcIntegFactor() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCcQuad(int) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getCcUseBlbIndicators() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCcUseBlbsIndicator() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCcUsingBlbsIndicator() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getCellAsXml() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getCellIdAsString() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getCfgQueueActIds() - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Get list of Activation IDs
getCfgQueueActIds() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getCfgStatusAndDurationReportAsHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrModel
Display 'Configuration Report' for subarray in HTML format.
getChangeListener() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getChanPerProduct() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getChanPerProduct() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getChildElements(Node) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of Elements from a Node.
getChildNodes(Node, int) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of child Nodes of a Node.
getChoiceItemText(int) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Returns the text of a specified choice.
getChoices() - Method in class edu.nrao.widar.gui.widget.MultiChooser
Show the Dialog window and wait for the user to make his choices and then return a matrix of booleans corresponding to them.
getClearErrorsString() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Returns a generic element containing a ClearErrors command
getClient() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the client InetAddress of the diagnostic to the caller
getCmibConfigurationAsXml(XMLGregorianCalendar, StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getCmibConfigurationAsXml(StringBuilder) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getCmibConfigurationAsXml() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getCmibConfigurationAsXml(boolean) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getCmibConfigurationAsXml() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getCmibConfigurationAsXml() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getCmibIpAddress(int, int, int) - Static method in class edu.nrao.widar.util.ComponentInfo
Returns a CMIB's IP address based on specified rack/crate/slot values.
getCmibLocationId(String) - Static method in class edu.nrao.widar.util.ComponentInfo
Returns a CMIB's locationId ('b103-b-3') based on its IP address.
getCmibLocationId(String, String, String) - Static method in class edu.nrao.widar.util.ComponentInfo
Returns a CMIB's locationId ('b103-b-3') based on its rack, crate, slot Strings.
getCmibLocationId(int, int, int) - Static method in class edu.nrao.widar.util.ComponentInfo
Returns a CMIB's locationId ('b103-b-3') based on its rack, crate slot numbers.
getCmibStatusAsString(OperStatus, String, String, String, String, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
getCmibStatusAsString(OperStatus, String, String, String, String, int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
getCmibStatusAsString(StringBuilder, OperStatus, String, String, String, String, int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
getCmStatusForActiveCorrModel() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
Report CM status in XML format.
getCmStatusForCorrModel(int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
Report CM status in XML format.
getCmStatusForFirstInActQueue() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
Report CM status in XML format.
getCmStatusForNextCorrModel(int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
Report CM status in XML format.
getCmStatusForPrevCorrModel(int) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
Report CM status in XML format.
getCmStatusForStation() - Method in class ca.nrc.widar.vciMapper.Station
 
getCmStatusForSubarray() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getCmStatusSubarrays() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getCmStatusXmlAsString(Object) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getCode() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Crate
Returns the 'code', or uncapitalized first letter of the title, usually for the purpose of composing the r-c-s address in the nomenclature.
getColor() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Return the active colour.
getColor() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Returns color as a string - used for HTML interface.
getColor() - Method in class ca.nrc.widar.vciMapper.Station
 
getColor() - Method in class edu.nrao.widar.gui.widget.LedElement
Return the Color of this LED or Color.black if it is OFF or not one of the predefined colors.
getColor() - Method in class edu.nrao.widar.gui.widget.LedPath
Return the Color of this LED.
getColor(String) - Static method in class edu.nrao.widar.gui.widget.Util
Returns a java.awt.Color from a string color name.
getColor() - Method in class edu.nrao.widar.gui.widget.VariableLed
Return the active colour.
getColorString() - Method in class edu.nrao.widar.gui.widget.Led
Return a String of the color of the LED.
getColorString() - Method in class edu.nrao.widar.gui.widget.LedElement
Return a String of the color of the LED.
getColorString() - Method in class edu.nrao.widar.gui.widget.LedPath
Return a String of the color of the LED.
getColumId(int) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
getColumnCount() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
getColumnCount() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
getColumnCount() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
getColumnId(int) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getColumnName(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
getColumnName(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
getColumnName(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
getCommEndTime() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the time of when the communication ended.
getCommPort() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
getCommStartTime() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the time of when the communication began.
getCommunityBytes(String) - Static method in class edu.nrao.widar.util.SnmpUtil
Return an ArrayList<Byte> of the specified SNMP Community String (password).
getComp(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the comparison count for the specified chip and CCC
getComp() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getComp(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getComparator(ComparatorType) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the actual comparator string that is specified in a CrmDbCriteria object for use in composing an SQL query string
getCompInfo() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Generates and returns a Vector of CompInfo JAXB object based on the Vector of FrontPanel JAXB objects stored in the selector widget
getCompleteDiagCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of entries currently within the diagComplete Hash
getCompleteDiagCount(DiagnosticType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of entries of the specified type that are currently in the diagComplete Hash
getCompleteDiagnosticList(ArrayList<String>) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns an ArrayList of Diagnostic XML objects which are stored currently in the diagComplete HashMap representing the diagnostic XML and results from completed diagnostics
getCompleteGoodList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns a list of Diagnostic IDs comprising all the Diagnostics currently within the model with a 'complete' status and an 'ok' condition
getCompleteList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns a list of CrmIssue IDs comprising all the CrmIssues currently within the model with a 'complete' status
getCompleteList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns a list of Diagnostic IDs comprising all the Diagnostics currently within the model with a 'complete' status
getComponent(String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Gets a JComponent from componentTable.
getCompXmlAsString(Object) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getConcurrentDiagnosticSize(int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
This method returns to the caller the number of concurrent Diagnostics of the specified type are alloweble.
getConcurrentDiagnosticSize(DiagnosticType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
This method returns to the caller the number of concurrent Diagnostics of the specified type are alloweble.
getCondition() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the current diagnostic condition to the caller
getConfig() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the current configuration type
getConfigAsXml(XMLGregorianCalendar) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getConfigChangeReport(CorrModel) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.Board
 
getConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getConfigHtml() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Generate output in the form of an HTML formatted String which details the current correlator configuration.
getConfigId() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.Station
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getConfigId() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getConfigName() - Method in class ca.nrc.widar.vciMapper.Board
 
getConfigPath() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getConfigPath() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current configuration XML path
getConfigQueue() - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Configuration Queue is created as: Collections.synchronizedList(new ArrayList())

User must manually synchronize on the returned collection when iterating over it.

getConfigTitle() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
A convenience method that returns a string characterizing the current correlator configuration
getConfigTitle(int) - Static method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns a string which characterizes the supplied correlator configuration
getConfigurationXml() - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Returns a String of the set of <register> XML elements being displayed on this panel.
getConfigXml() - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns a HashMap containing as many as 4 StationBoard XML objects that, once sent to the station directly, will configure the Station board Output chips as they were configured at the time this method was called.
getConnection() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Returns the CrmDb Connection for any queries requiring to connect.
getConnection() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the HttpURLConnection used for the communications with the server.
getCorrChip(int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getCorrChipAsXml() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getCorrMode() - Static method in class ca.nrc.widar.mccc.crm.Crm
Return the correlator mode
getCorrMode() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Return the correlator mode
getCorrModelForActTime(long) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getCorrModelForModelId(long) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
Activation Queue is a list of CorrModels.
getCorrModelForRevoke(long) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getCorrModelInHtmlFormat(StringBuilder, int, String) - Method in class ca.nrc.widar.vciMapper.CorrModel
This method is used to display the list of subarrays on Home Page, HTML_BOARD_STATUS_PAGE and HTML_SUBBAND_PAGE
getCorrModelStrBuilder(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getCorrType() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getCorrUpdateMode() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the integer representation of the currently selected update mode for the correlator model.
getCount(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getCounter() - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
getCqExcludeId() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
getCrate() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the Crate ID for this board
getCrate(int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the integer crate id of the StB within the station that is providing the signal from the specified baseband pair
getCrate() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getCrate(int) - Method in class ca.nrc.widar.vciMapper.Rack
 
getCrateId() - Method in class ca.nrc.widar.vciMapper.Board
 
getCrateId() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getCrateId() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getCrateId() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getCreatedAt() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getCreateTime() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getCriteria() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the list of criteria descriptions for this query
getCriteriaString(List<CrmDbCriteria>) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Produces and returns the criteria portion of an SQL query based on the supplied CrmDbCriteria list.
getCrmAtLeastOneDisabled() - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getCrmDbInfo() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Returns a CrmDbInfo object with the current CrmDb parameters, including a string version of the URL.
getCrmDbQuery() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the CrmDbQuery JAXB XML object that is represented by this instance of the CrmQuery class
getCrmDescriptor() - Static method in class ca.nrc.widar.mccc.crm.Crm
Return the current CRM mode string description
getCrmErrorReportTimeStamp() - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getCrmFileList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getCrmFileList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current list of CrmFile XML objects designated on the Tab
getCrmIssue(Integer) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns the CrmIssue XML object in the specified row
getCrmIssueAt(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns the CrmIssue XML object found at the specified row
getCrmIssueList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns a list of CrmIssue IDs comprising all the CrmIssues currently within the model
getCrmMode() - Static method in class ca.nrc.widar.mccc.crm.Crm
Return the current CRM mode variable
getCrmModeString() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
getCrmReportErrors() - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getCrmXmlAsString(Object) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getCrossBarConfig(int) - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Derives the current crossbar configuration Timing XML element from information stored in the stationMap and quadrantMap collected prior to making any configuration changes to the system.
getCrossBarDirect(int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Generates a Timing XML element that, if sent, would configure this station into mapDirect mode, meaning that all crossBar boards accepting input from this station would send the data 'straight through' to the hard-wired baseline board pair.
getCrossBarFanout(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Generates a Timing XML element that, if sent, would configure this station into fanout mode, meaning that all crossbars fed from this station are directed to route signals from only the specified bbPair StB through to all physically connected Baseline BOards
getCsdDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Creates and returns a Vector ov Diagnostic XML objects based on the current configuration of components within the tab.
getCurrentConfigName() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Overriding method, returns the current configuration name, in the case of this diagnostic, the first 16 characters of the filename of the current configuration file is returned.
getCurrentConfigName() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
This method returns the String representation of the current configuration in the CRM BlBHST diagnostic.
getData() - Method in class ca.nrc.widar.mccc.crm.CrmComm.SmallDataReadyListener
Returns the String data object to the caller.
getData() - Method in class edu.nrao.widar.util.DataReadyEvent
Returns the data associated with this event.
getDataPath(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the integer data path id of the specified baseband supplied to the method.
getDataPath(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getDataPath(int) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getDataProcPath() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getDataProcPath() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current path name for data processing
getDataSource(StbHstDpModeType, StbHstDataType) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Returns a 2-slement String array (one for each data path) which contains the string value of input data source for each data path (the array is indexed by the 0-based data path id).
getDbInfoHtml() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns an HTML string indicating the status of the CrmDb Server
getDefaultBbIdFromMlid() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getDefaultXmlConfigCrmFileList() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getDemuxFactor(int) - Static method in class ca.nrc.widar.vciMapper.StbDataPath
 
getDesc() - Method in enum ca.nrc.widar.mccc.crm.Crm.CorrMode
 
getDesc() - Method in enum ca.nrc.widar.mccc.crm.Crm.CrmMode
 
getDescriptor() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getDestBlbMlid() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getDestBlbWaferId() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getDestBlbWaferSet() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getDestIp() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getDestIp() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current destination IP Address value
getDestIP(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getDestMac() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getDestMac() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current destination MAC Address value
getDestMAC(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getDestPort(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getDestQuadId() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getDestQuadPairId() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getDev() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getDevida() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getDevidb() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getDevsn() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getDiag() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the Diagnostic JAXB XMl object associated with this diagnostic
getDiag() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getDiagCondition() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the Diagnostic Condition value for this board (post BLB-HST)
getDiagId() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the unique Diagnostic Identifier to the caller
getDiagnostic(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns the Diagnostic XML object in the specified row
getDiagnosticAt(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns the Diagnostic XML object found at the specified row
getDiagnosticId(int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Generates an ID string of random characters of 'n' length in order to assign to diagnostic XML components.
getDiagnosticList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns a list of Diagnostic IDs comprising all the Diagnostics currently within the model
getDiagnosticResult(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Method returns a Diagnostic XML object, with any Result XML objects within the system to the caller.
getDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Abstract method.
getDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Creates and returns a Vector of Diagnostic XML objects based on the current configuration of components within the tab.
getDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Creates and returns a Vector ov Diagnostic XML objects based on the current configuration of components within the tab.
getDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
Creates and returns a Vector of Diagnostic XML objects based on the current configuration of components within the tab.
getDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabTest
Creates and returns a Vector of Diagnostic XML objects based on the current configuration of components within the tab.
getDiagRemoveCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of DiagRemove XML objects currently within the DiagRemoveList
getDiagRemoveList() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the DiagRemoveList ArrayList
getDiagResultXml() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Obtains a Result XML object from the blb describing the accumulated statistics and results of the diagnostic on the Baseline Board This method obtains the Result XML directly from the CrmBaselineBoard object in the 'NEW' method of analyzing BLF Files.
getDiagResultXml() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Obtains a Result XML object from the blb describing the accumulated statistics and results of the diagnostic on the Baseline Board This method obtains the Result XML directly from the CrmBaselineBoard object in the 'NEW' method of analyzing BLF Files.
getDiagResultXml() - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Method which analyzes the results of all sub-diagnostics in the form of the csdErrorList.
getDiagResultXml() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns a DiagResult XML object for this diagnostic.
getDiagResultXml() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generate and returns a Result XML element describing the entire result set from this diagnostic
getDiagResultXml() - Method in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
 
getDiagState() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the current diagnostic state to the caller
getDiagStatusCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of entries in the diagStatus Hash
getDiagStatusList() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the DiagStatus ArrayList
getDiagTest() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the DiagnosticType variable for this diagnostic
getDiagTestString() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Overriding method, returns the ID string for this Diagnostic
getDiagTestString() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Overriding method, returns the ID string for this Diagnostic
getDiagTestString() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the Diagnostic Test Identifier string to the caller.
getDiagTestString() - Method in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
 
getDiagType() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Overriding method, returns the integer type of this Diagnostic
getDiagType() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Overriding method, returns the integer type of this Diagnostic
getDiagType() - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Returns the Diagnostic Type in the form of an integer
getDiagType() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the Diagnostic Type integer value (as defined in CrmCommon.DIAG_TYPE_*) to the caller.
getDiagType() - Method in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
 
getDisableAutoCorrForB_A() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getDom(String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Document from an XML String.
getDom(File) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Document from a File of XML.
getDom(InputSource) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Document from an org.xml.sax.InputSource.
getDtEpoch() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getDtEpoch() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getDtEpoch() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getDtidForC() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getDumpTrig(int) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getDumpTrigForPpg(PolProductGroup) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getDumpTrigId() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getDumpTrigSourceSide() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getDv(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the DV comparison error count for the specified chip and CCC
getDv() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getDv(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getDvCountCenter() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Returns the Data Valid Center Count value for this frame
getElement(String, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Element of the first Element in the specified String of XML that matches the specified Element name.
getElement(File, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Element of the first Element in the specified File of XML that matches the specified Element name.
getElement(Node, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Element of the first Element in the specified org.w3c.dom.Node that matches the specified Element name.
getElementCbeConfigBaseband(boolean) - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
getElementCbeConfigBdfShape() - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
getElementCbeConfigPln() - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
getElementForAttribute(Element, String, String, int) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Element of the first Element in the specified org.w3c.dom.Node that contains a specified attribute that matches a specified numerical value.
getElementForAttribute(Element, String, String, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a org.w3c.dom.Element of the first Element in the specified org.w3c.dom.Node that contains a specified attribute that matches a specified value.
getElementPipelineSpec() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getElements(String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's from an XML String.
getElements(File) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's from an XML File.
getElements(String, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's of a specified name from an XML String.
getElements(Element, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's of a specified name from a Element Node.
getElements(File, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's of a specified name from an XML File.
getElements(Node) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of all the child Element's of a specified Node.
getElements(Node, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's of a specified name from a Node.
getElements(Document) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's from a Document.
getElementsSwmapDual() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getElementSw(boolean) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getElementsWhoseNamesStartWith(Node, String) - Static method in class edu.nrao.widar.util.XmlUtil
Return a java.util.ArrayList of DOM Element's whose name starts with a specified String from a specified Node.
getElementSwmapDual() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
getEnterpriseId() - Method in class edu.nrao.widar.util.SnmpTrapManager.SnmpTrapEvent
 
getEpoch() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getErrCount(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the Total comparison error count (DV + LAG) for the specified chip and CCC
getError(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getErrorCode() - Method in class ca.nrc.widar.vciMapper.Board
 
getErrorCode() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getErrorCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the number of errors currently in the Error XML ArrayList
getErrorDetect() - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Returns the state of the errorDetect flag.
getErrorList() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the ArrayList of Error elements to the caller
getEventSource() - Method in class edu.nrao.widar.util.SnmpTrapManager.SnmpTrapEvent
 
getEvlaLocationSid() - Method in class ca.nrc.widar.vciMapper.Station
 
getException() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the HttpLinkException if one was thrown during the communication.
getExplicitList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Return a Vector of Strings comprising the verified IP address strings within the explicit component list
getFDiff() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Returns the state of the FDiff flag from this diagnostic
getFDiff() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Returns the state of the FDiff flag from this diagnostic
getFDiff() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
getField(String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Deprecated. Use getFieldText instead.
getFieldText(String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Gets the value of JTextField component in this panel.
getFileName() - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Returns the full file name to the caller, including full absolute path.
getFilter(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
getFilter(int, int) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getFilter(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getFilterCompList() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getFilterCompXml(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Returns an ArrayList of FilterComp XML elements that correspond to the supplied data path and filter chip id, from the list that is stored within this comparable which was accumulated during the analysis
getFilterCompXml(ObjectFactory, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Generates and returns a FilterComp XML element based on the input parameters.
getFilterConfigCf(int, int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Determines and returns an Integer value for Center Frequency based upon the configuration of the current diagnostic.
getFilterForSBID(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getFilterGainConfiguration(VciConfiguration.DataPath) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getFilterId(int) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getFilterSummaryXml(ObjectFactory, int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Generates and returns an ArrayList of FilterSummary XML elements for this comparable.
getFirstStb() - Method in class ca.nrc.widar.vciMapper.Station
 
getFrameTitle(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getFreeMemory() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns a long integer containing the amount of free memory available within the CRM Java Virtual Machine (JVM)
getFromString() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the portion of the SQL query that describes the FROM TABLE
getGetText(HttpExchange) - Static method in class edu.nrao.widar.util.HttpServerLink
Static convenience method to retrieve the HTTP POST method request text.
getGuiHostList() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the GUI hostname list
getGuiTitle(Element) - Static method in class edu.nrao.widar.util.ComponentInfo
 
getHead(Handler) - Method in class ca.nrc.widar.vciMapper.VciMapperLogFormatter
 
getHex(byte[]) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Generates a hexadecimal number string from a byte array of numbers
getHost() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Returns the Host name
getHost() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Returns the current host name as a String
getHostInfo() - Static method in class ca.nrc.widar.mccc.crm.Crm
 
getHtml() - Method in class ca.nrc.widar.mccc.crm.CrmHttpServer
Returns an HTML string identifying the CRM
getHtml() - Method in class ca.nrc.widar.vciMapper.VciHttpServer
 
getHtml() - Method in class edu.nrao.widar.util.HttpServerLink
Return a default html representation that is displayed on a web page when no other path or context is specified in the URL.
getHtml() - Method in class edu.nrao.widar.util.TestHttpServer
Returns the official TEST main web page in HTML.
getHtmlHeaderNew(StringBuilder, String) - Method in class ca.nrc.widar.vciMapper.CorrModel
Display CorrModel in HTML format
getHtmlHeaderWithCfgStatusTable(StringBuilder, String) - Method in class ca.nrc.widar.vciMapper.CorrModel
Display CorrModel in HTML format: getHtmlHeaderWithCfgStatusTable
getHtmlInfoPage() - Static method in class ca.nrc.widar.mccc.crm.CrmState
Returns a String that is the CRM HTML description page
getHtmlPageDisabledComponents() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML interface - Complete web-page: Display disabled boards and components.
getHtmlState() - Static method in class ca.nrc.widar.mccc.crm.CrmState
Returns an HTML page describing the current status of the CRM
getHtmlStats() - Static method in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
Return a string containing an HTML formatted table used to display the detailed count results for a particular statistic
getHtmlStats(CrmBaselineBoard) - Static method in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
Return a string containing an HTML formatted table used to display the detailed count results for a particular statistic
getHwIntegTime() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getHwIntegTime() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getHwIntegTime() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getId() - Method in enum ca.nrc.widar.mccc.crm.Crm.CorrMode
 
getId() - Method in enum ca.nrc.widar.mccc.crm.Crm.CrmMode
 
getId() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Returns the CCC ID
getID() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Returns the integer representation of the enum value
getID() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.BoardType
Returns the integer representation of the enum value
getID() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Crate
Returns the integer representation of the enum value
getID() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Returns the integer representation of the enum value
getID() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.SignalPath
Returns the integer representation of the enum value
getID() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.SwitchMode
Returns the integer representation of the enum value
getID() - Method in enum ca.nrc.widar.mccc.crm.CrmLog.ErrorLevel
 
getId() - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Returns the Station ID
getId() - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
getId() - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the Station ID
getId(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns the CrmIssue ID of the CrmIssue in the specified row
getId(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns the Diagnostic ID of the Diagnostic in the specified row
getId() - Method in class ca.nrc.widar.vciMapper.CorrModel
CorrModel ID has been introduced for debuging only.
getId() - Method in class ca.nrc.widar.vciMapper.Crate
 
getId() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
getId() - Method in class ca.nrc.widar.vciMapper.Rack
 
getId() - Method in class ca.nrc.widar.vciMapper.Station
 
getId() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getId() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getId() - Method in class ca.nrc.widar.vciMapper.Subarray
Get configId.
getId() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the numerical id of this HttpLinkCallback instance.
getIdAsString() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getIdAsString() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getIdAsString() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getIdAsString() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getIdleColumn() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getIdleRow() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getIdleRowColumn() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getIdsAsShortString() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getIdsAsShortString() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getIdsAsString() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getIdsAsString() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getIdsAsString() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getIdsAsString() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getIdsAsString() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getIdsAsString() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
getIDsAsString() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getIdsForLogReport(StationBoard, XMLGregorianCalendar) - Method in class ca.nrc.widar.vciMapper.StationRack
 
getIdsFromInput() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getIndex() - Method in class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
getInpQuant() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getInputConfig(ObjectFactory, StbHstDpModeType) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns an Input XML element which is used to fine tune the configuration of the Input chip used in the required configuration.
getInputFileNames() - Method in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
getInputFor(int) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getInputGenSeed(int, StbHstDpModeType) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Determines and returns the input generation seed for the wideband test signal generator based on the mode and the data path.
getInputStateCounterAsXml() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getInputStreamId() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getInputStreamX(int) - Method in class ca.nrc.widar.vciMapper.CorrChip
Get X input data stream for a given index
getInputStreamY(int) - Method in class ca.nrc.widar.vciMapper.CorrChip
Get Y input data stream for a given index
getInputWafer(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getInputWafer() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getInputWafer(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getInputWafer(int, int, int) - Method in class ca.nrc.widar.vciMapper.StationRack
 
getInt(JTextField) - Static method in class edu.nrao.widar.gui.widget.Util
Returns the integer value of the contents of a JTextField whose radix is determined by whether it starts with '0x'.
getInt(JTextField, int) - Static method in class edu.nrao.widar.gui.widget.Util
Returns the integer value of the contents of a JTextField whose radix is specified unless the value starts with '0x'.
getInt(JTextField, String) - Static method in class edu.nrao.widar.gui.widget.Util
Return the integer value of a JTextField or, if NumberFormatException, it pops up an error message dialog returns -1.
getInt(String, String) - Static method in class edu.nrao.widar.gui.widget.Util
Returns the integer value of a number String if converted properly or returns -1 and pops up an error dialog if NumberFormatException.
getIntegFactor() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getIntegTime() - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
getInterFrameDelay() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getInterFrameDelayAlg() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getInternalStream(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getInternalStreamConfigAsXml() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getInterval() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Returns the current BLINK/PULSE interval value (ms).
getInterval() - Method in class edu.nrao.widar.gui.widget.RefreshPanel
Returns the refresh interval.
getInterval() - Method in class edu.nrao.widar.gui.widget.ServerPanel
Returns the refresh interval.
getInterval() - Method in class edu.nrao.widar.gui.widget.VariableLed
Returns the current BLINK/PULSE interval value (ms).
getIntNoException(JTextField, int) - Static method in class edu.nrao.widar.gui.widget.Util
Returns the integer value of a field.
getIp(Element) - Static method in class edu.nrao.widar.util.ComponentInfo
Return the IP address of a WIDAR component.
getIpAddress() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Returns the ipAddress attribute value from the Diagnostic XML
getIpAddress() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Returns the ipAddress attribute value from the Diagnostic XML
getIpAddress() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the String IP Address for this Board
getIpAddress() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
getIpAddress() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
getIpAddress() - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Returns the IP address of the server.
getIpAddress() - Method in class edu.nrao.widar.gui.widget.ServerPanel
Returns the IP address of the server.
getIpAddress() - Method in class edu.nrao.widar.util.HttpLink
Return a String of this HttpLink's host name or IP address whichever was used to create it.
getIpDestAddress() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getIpField() - Method in class edu.nrao.widar.gui.widget.ServerPanel
Gets the IP address field.
getIpString() - Method in class edu.nrao.widar.gui.widget.McbRegisterPanel
Return the current IP address.
getIssue() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getJoin() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the current list of CrmDbJoin JAXB XML object in this query
getLabel() - Method in enum ca.nrc.widar.mccc.crm.Crm.CorrMode
 
getLabel() - Method in enum ca.nrc.widar.mccc.crm.Crm.CrmMode
 
getLabel(Integer, Integer) - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Determines and returns the Baseband ID label to be used in the BBInfo objects on the GUI in the mode that is specified
getLabel(int) - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Assemble and return the properly formatted rack ID for this RackType
getLag(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the LAG comparison error count for the specified chip and CCC
getLag() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getLag(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getLagChain() - Method in class ca.nrc.widar.vciMapper.CbeProductFour
 
getLagChain() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
getLagChain(SubProductType) - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
getLagChainSegmentAsString(int, int, int, int, int, int) - Static method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getLagCollectionDuration() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getLagCollectionDuration() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current lag collection duration value
getLaggedBand() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getLaggedBbid() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getLaggedDataPath() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getLastCbeAlert() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getLastMsgTransmittedAt() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getLastQuery() - Method in class edu.nrao.widar.util.HttpLink
Returns the last query (URL and request message) sent to the server.
getLastVciAlert() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getLevel() - Method in enum ca.nrc.widar.mccc.crm.CrmLog.ErrorLevel
 
getLfrInfoHtml() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns an HTML string indicating the status of the LFR
getLfrPort() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the Lag Frame Receiver port identifier
getLink() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the HttpLink object associated with this board
getListenerStack() - Method in class edu.nrao.widar.util.DataReadyEvent
Deprecated. This is too complicated and should not be needed (I think).
getListOfActTriggers() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getListOfBasebands() - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
getListOfCbeFunctionsEntrySet() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getListOfCrossProdForSpectralWindow() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getListOfSingleDishProdsForSpectralWindow() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Get list of single dish products (i.e.
getListOfSpectWindows() - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
getListOfStationIds() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getListOfStationIds(ArrayList<Station>) - Static method in class ca.nrc.widar.vciMapper.Station
 
getListOfStations() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getListOfStations() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getListOfStations() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getListOfSubarrays() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getListOfVciMessages() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getLocalInetAddress() - Static method in class ca.nrc.widar.mccc.crm.CrmComm
Returns the InetAddress for the local host (CRM)
getLocationName(String) - Static method in class edu.nrao.widar.util.ComponentInfo
Return the network 'location name' of a WIDAR Station or Baseline Board component.
getLocationName(Element) - Static method in class edu.nrao.widar.util.ComponentInfo
Return the network 'location name' of a WIDAR Station or Baseline Board component.
getLog() - Method in enum ca.nrc.widar.mccc.crm.Crm.CrmMode
 
getLogBlbMessages() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogCbeMessages() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogCrmMessages() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogger(String) - Static method in class edu.nrao.widar.util.Logger
 
getLogLevel() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogStbMessages() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogToFile() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogVciMessages() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogXAlerts() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLogXbbMessages() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getLongName(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Convenience method to return the full-path name of the selected file on the remote server.
getLongVal(String) - Static method in class edu.nrao.widar.util.Num
Returns the long value of number String whose radix is based on the presence of of the leading chars "0x".
getLongVal(String, int) - Static method in class edu.nrao.widar.util.Num
Returns the long value of number String where the radix of the number String is passed as a parameter.
getLtaAsXml() - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
getLtaAsXml() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getLtaIntegFactor() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getLtaIntegFactor() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getLtaIntegFactor() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getMacAddress() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
getMacDestAddress() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getMagData(int) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Returns the magnitude of the signal at the requested lag for this frame
getMaskedBitsString(int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Return the masked portion of an int as a String of bits ('1' & '0's).
getMaskedBitsString(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Convert masked bits of a number String into a String of '1' & '0's.
getMaskedBitsString(String, int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Convert masked bits of a number String into a String of '1' & '0's.
getMaskedBitsString(int, int) - Static method in class edu.nrao.widar.util.Num
Return the masked portion of an int as a String of bits ('1' & '0's).
getMaskedBitsString(String, int) - Static method in class edu.nrao.widar.util.Num
Convert masked bits of a number String into a String of '1' & '0's.
getMaskedBitsString(String, int, int) - Static method in class edu.nrao.widar.util.Num
Convert masked bits of a number String into a String of '1' & '0's.
getMaskedBitsStringHex(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Convert a hex number String into a String of bits ('1' & '0's).
getMaskedBitsStringHex(String, int) - Static method in class edu.nrao.widar.util.Num
Convert a hex number String into a String of bits ('1' & '0's).
getMaskedVal(int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Return the int value of an int with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedVal(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Return the int value of an String value with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedVal(String, int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Return the int value of an String value with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedVal(int, int) - Static method in class edu.nrao.widar.util.Num
Return the int value of an int with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedVal(String, int) - Static method in class edu.nrao.widar.util.Num
Return the int value of an String value with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedVal(String, int, int) - Static method in class edu.nrao.widar.util.Num
Return the int value of an String value with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedValHex(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Return the int value of an String value with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedValHex(String, int) - Static method in class edu.nrao.widar.util.Num
Return the int value of an String value with a mask applied and right shifted with leading zeros to place the masked value into the LSBs (remove its magnitude in the orginal word).
getMaskedValString(int, int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Return the masked and right shifted portion of an int as a String in the specified radix using mask to determine numDigits and a leading char of '0'.
getMaskedValString(int, int, int, int, char) - Static method in class edu.nrao.widar.gui.widget.Util
Return the masked and right shifted portion of an int as a String in the specified radix with the specified number of digits and the specified leading character.
getMaskedValString(String, int, int, int) - Static method in class edu.nrao.widar.gui.widget.Util
Return the value of a contiguous set of bits within a number String.
getMaskedValString(String, int, int, int, int, char) - Static method in class edu.nrao.widar.gui.widget.Util
Return the value of a contiguous set of bits within a number String.
getMaskedValString(int, int, int) - Static method in class edu.nrao.widar.util.Num
Return the masked and right shifted portion of an int as a String in the specified radix using mask to determine numDigits and a leading char of '0'.
getMaskedValString(int, int, int, int, char) - Static method in class edu.nrao.widar.util.Num
Return the masked and right shifted portion of an int as a String in the specified radix with the specified number of digits and the specified leading character.
getMaskedValString(String, int, int, int) - Static method in class edu.nrao.widar.util.Num
Return the value of a contiguous set of bits within a number String.
getMaskedValString(String, int, int, int, int, char) - Static method in class edu.nrao.widar.util.Num
Return the value of a contiguous set of bits within a number String.
getMaxMemory() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns a long integer containing the maximum amount of memory currently available to the CRM JVM
getMcccXml() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the Mccc XML object which was read from the physical system, and contains an XML hierarchy describing each physical component of the correlator system.
getMessage() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the current diagnostic status message to the caller
getMessageBrief() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the current diagnostic 'brief' status message to the caller
getMessageCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the number of messages currently in the messageList
getMessageList() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the messageList ArrayList that contains any Message XML objects created during the course of the diagnostic
getMinHwIntegTime() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getMinHwIntegTime() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getMinHwIntegTime() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getMjd(Date) - Static method in class edu.nrao.widar.util.Num
Returns the Modified Julian Date (MJD) of the specified Java Date.
getMjdString(Date, int) - Static method in class edu.nrao.widar.util.Num
Return the String value of the MJD for the specified java.util.Date rounded to the specified number of digits after the decimal place.
getMlid() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getMlid() - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
getMlid() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getMlid() - Method in class ca.nrc.widar.vciMapper.Board
 
getMlid() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getMlid() - Method in class ca.nrc.widar.vciMapper.LagChainSegment
 
getMlid() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getMlid() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getMlidAsString() - Method in class ca.nrc.widar.vciMapper.Board
 
getMlidAsString() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getMlidAsString(int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getMlidForBb(int) - Method in class ca.nrc.widar.vciMapper.Station
 
getMode() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getMode() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Return the current active mode of the VariableLed.
getMode() - Method in class edu.nrao.widar.gui.widget.VariableLed
Return the current active mode of the VariableLed.
getModelFromActQueue(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getModelInfoHtml() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns an HTML string indicating the status of the Correlator Model within the CRM Server
getMyCmibStatusAsString(boolean) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
getMyCmibStatusAsString(boolean) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
getName() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Returns the current database name
getName() - Method in class ca.nrc.widar.vciMapper.Board
 
getName() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getName() - Method in class ca.nrc.widar.vciMapper.Crate
 
getName() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getName() - Method in class ca.nrc.widar.vciMapper.Rack
 
getName() - Method in class ca.nrc.widar.vciMapper.Station
 
getName() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getName() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getName() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getNarrowJOptionPane(int) - Static method in class edu.nrao.widar.gui.widget.NarrowOptionPane
Returns a JOptionPane with a specified maximum width.
getNextCbeBdfShapeId(String) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
Generate BDF Shape ID using the prefix.
getNextCorrModelId() - Static method in class ca.nrc.widar.vciMapper.CorrModel
 
getNextMessageId() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getNextProductId() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getNFiles() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getNibble() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getNibble() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getNumBaselineBoards(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
New version: If reConfigureCompleteBaselineBoards=true CM will not re-configure rows/columns that are already used.
getNumBaselineBoardsForCc(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getNumBaselineBoardsForVdif(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getNumBaselines() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Get number of input wafers used for baselines
getNumBins() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getNumBitsToCorrelate() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getNumBitsToCorrelate() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getNumBitsToCorrelate() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getNumCCCs() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getNumChannels() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getNumChannels() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getNumIdleCells() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getNumIdleCellsPerCcq() - Method in class ca.nrc.widar.vciMapper.CorrChip
Get number of idle cells per CCQ.
getNumIdleColumns() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getNumIdleRowsColumns() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getNumLags() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getNumLags() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getNumOfUnusedCCCs() - Method in class ca.nrc.widar.vciMapper.CorrChip
Get number of unused CCCs.
getNumOfUnusedCCQs() - Method in class ca.nrc.widar.vciMapper.CorrChip
Get number of unused CCQs.
getNumPhaseBins() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getNumPhaseBins() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getNumPhaseBins() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getNumProducts() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getNumProducts() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getNumSegments() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getNumThreads() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the current number of conturrent threads within the JVM
getObservationTime() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getOffColor() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Returns the current OFF colour.
getOffColor() - Method in class edu.nrao.widar.gui.widget.VariableLed
Returns the current OFF colour.
getOidBytes(String) - Static method in class edu.nrao.widar.util.SnmpUtil
 
getOidValues() - Method in class edu.nrao.widar.util.SnmpTrapManager.SnmpTrapEvent
 
getOpenFileDescriptorCount() - Static method in class ca.nrc.widar.mccc.crm.Crm
 
getOperStatus() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getOperStatus() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getOperStatusCommFailure() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getOrd() - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
getOutGroup() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getOutputConfig() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Upates the Output Chip configuration from the current board information, and generates the Output XML elements required to return the board to the current output configuration state.
getOutputs() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Obtains the Outputs XML from the associated proc file on the CMIB for this board, unmarshalls the XML output into a JAXB Outputs object and returns that object to the caller.
getOutputsCommand() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
 
getOutputStream(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getOutputWafer(int) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getOutWafer(int, int, int) - Method in class ca.nrc.widar.vciMapper.StationRack
 
getOutWafer() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getOvr(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the Accumulator Overrun status bit error count for the specified chip and CCC
getOvr() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getOvr(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getPackageVersion(String) - Static method in class edu.nrao.widar.util.ComponentInfo
Return a software Package's version number.
getPairId() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getPairId() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
getPairId() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getPairMate() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getPeakDiff() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the maximum absolute peak difference for the entire board
getPeakDiff(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the maximum peak difference for the specified chip and CCC
getPeakDiff() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getPeakDiff(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getPol(Integer, Integer) - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Determines and returns the polarization string to be used for this Baseband type in the mode that is specified
getPolarization() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getPolarization() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getPolProduct(ArrayList<PolarizationProduct>, CorrelationType) - Static method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getPolProductGroup(int, int, boolean, int) - Method in class ca.nrc.widar.vciMapper.Subarray
 
getPortForLtaFrames() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getPositionInPair() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getPositionInPair() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
getPositionInPair() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getPostText(HttpExchange) - Static method in class edu.nrao.widar.util.HttpServerLink
Static convenience method to retrieve the HTTP POST method request text.
getPpgList() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getPpGroup() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getPpid() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getPreferredSize() - Method in class edu.nrao.widar.gui.widget.Led
 
getPreviouslySelectedButton() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the previously selected button.
getPreviouslySelectedButtonIndex() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the index of the previously selected button.
getPreviouslySelectedIndex() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the index of the previously selected button.
getPreviousSelectedIndex() - Method in class edu.nrao.widar.gui.widget.ChoiceField
Returns the index of the previous selection.
getPreviousSelectedSubIndex() - Method in class edu.nrao.widar.gui.widget.ChoiceField
Returns the sub-index of the previous selection.
getPrimarySid() - Method in class ca.nrc.widar.vciMapper.CorrChip
This method is used for the Correlator Chip that belongs to a subarray with one row/column per station - method is used to get primary Station ID.
getProdId() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getProductAsString() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getProductLagChain(int) - Method in class ca.nrc.widar.vciMapper.Subarray
 
getProductLagChain(int) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getProductLagChainList() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getProductMode() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getProductType() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getProductTypeAsString() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getProgMax() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the current maximum progress boundary value to the caller
getProgMin() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the current minimum progress boundary value to the caller
getProgress() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Reports the current progress value to the caller
getProgress(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns the integer progress value (0-100) of the diagnostic in the specified row
getPromptBand() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getPromptBbid() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getPromptDataPath() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
getPropertySetCopy(String) - Static method in class edu.nrao.widar.util.SystemProperties
Returns a deep copy of a specified property set.
getQuadAsXml() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getQuadId() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getQuadrant() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the zero-based quadrant number for this baseline board
getQuadrantId() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getQuadrantId() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
getQuadrantMap() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Return a HashMap indexed by quadrant ID containing CrmQuadrant objects as values
getQuadrantModels() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Generates a CrmModel JAXB object based upon the crm.xsd schema.
getQuadrantStatusCommand() - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
 
getQuery() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the String representation of this instance of the CrmQuery class This method requires to be overridden
getQuery() - Method in class ca.nrc.widar.mccc.crm.CrmQueryDelete
Returns an SQL formatted String based on the definition of this query that can be used to elicit the requested results from the CRMDb
getQuery() - Method in class ca.nrc.widar.mccc.crm.CrmQueryInsert
Returns an SQL formatted String based on the definition of this query that can be used to elicit the requested results from the CRMDb
getQuery() - Method in class ca.nrc.widar.mccc.crm.CrmQuerySelect
Returns an SQL formatted String based on the definition of this query that can be used to elicit the requested results from the CRMDb
getQuery() - Method in class ca.nrc.widar.mccc.crm.CrmQueryUpdate
Returns an SQL formatted String based on the definition of this query that can be used to elicit the requested results from the CRMDb
getQueryCounter() - Method in class ca.nrc.widar.vciMapper.Board
 
getQueryDelayCounter() - Method in class ca.nrc.widar.vciMapper.Board
Read value of "query retransmit delay counter".
getQueryString(Marshaller) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the string representation of this CrmDbQuery JAXB XML object represented by this instance of the CrmQuery class.
getQueryString() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the query text used in this communication.
getQueryType() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns the QueryType object for this instance of CrmQuery, and returns null if the CrmQuery is not defined
getQueue() - Method in class ca.nrc.widar.vciMapper.ConfigFromCbeQueue
Configuration Queue is created as: Collections.synchronizedList(new ArrayList())

User must manually synchronize on the returned collection when iterating over it.

getQueue() - Method in class ca.nrc.widar.vciMapper.ControlQueue
Monitor And Control Queue is created as: Collections.synchronizedList(new ArrayList())

User must manually synchronize on the returned collection when iterating over it.

getQueueDiagCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of entries in the diagQueue Hash
getQueueDiagCount(DiagnosticType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of entries of the specified type that are currently in the diagQueue Hash
getQueueInfoHtml() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns an HTML string indicating the status of the CRM Queue
getQueueStatusHtml() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns an HTML formatted status page for the CrmDiagnosticQueue
getQueueType(DiagnosticType) - Static method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Translates the DiagnosticType value into an integer code for a diagnostic type
getQueueType(int) - Static method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Translates the an integer into a DiagnosticType value for a diagnostic type
getRack() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the integer Rack ID for this board
getRack(int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the integer rack id of the StB within the station that is providing the signal from the specified baseband pair
getRack() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getRack(int) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getRackID() - Method in class ca.nrc.widar.mccc.crm.CrmRack
Returns the integer part of the Rack ID
getRackId() - Method in class ca.nrc.widar.vciMapper.Board
 
getRackId() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getRackId() - Method in class ca.nrc.widar.vciMapper.Crate
 
getRackId() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getRackId() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getRackId() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getRackId() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getRackString() - Method in class ca.nrc.widar.mccc.crm.CrmRack
Returns the full string rack ID of the rack
getRcInputStreamId() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getRcInputWafer(int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getRcInternalStreamId() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getRcs(String) - Static method in class edu.nrao.widar.util.ComponentInfo
Returns a CMIB's rack, crate, and slot numbers in an array of ints.
getReadOnlyStatement() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Returns a read-only statement for any query requiring a Statement.
getReadyForMapping() - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
 
getRec(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the record comparison count for the specified chip and CCC
getRec() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getRec(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getRecBlockEnd() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRecBlockSize() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRecBlockStart() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRecBlockTotal() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRecCapacity() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRecConfigAsXml() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRecCount() - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Returns the current record count of the BLF File.
getRecFactor() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getRecFactor() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getRecFactor() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getRecFactor() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getRecircCrcErrorCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the number of RecircCrcErrors currently in the RecircCrcError XML ArrayList
getRecircCrcErrorList() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the ArrayList of RecircCrcError elements to the caller
getRecircFactor() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getRecircId() - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
getRecircModel() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
getRecircTcsStatus(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns an indication of whether the TimeCodeSource analysis for the specified recirculator chip, and TimeCodeSource value has been completed.
getRecircTcsStatus() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns an indication of whether the TimeCodeSource analysis for all recirculator chips, and TimeCodeSource values have been completed.
getReConfigureCompleteBaselineBoards() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getReConfigureCompleteBaselineBoards() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getReConfigureCompleteBaselineBoards() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getRecOutputRate() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRecSeries(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
getRecSeries() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getRecSeries(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getRecStreamSource(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRegisterValue(int) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Returns the value of the specified register.
getReleaseInfo() - Method in class ca.nrc.widar.mccc.crm.Crm
Obtains and returns the release info string for this instantiation of the CRM.
getReleaseInfo() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Obtains and returns the release info string for this instantiation of the CRM.
getReleaseString() - Static method in class ca.nrc.widar.mccc.crm.Crm
 
getReplicate() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRequestParameters(HttpExchange) - Static method in class edu.nrao.widar.util.HttpServerLink
Return a java.util.Properties list of the parameters supplied by the requestor in this exchange.
getResponse(String) - Static method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified url.
getResponse(String, int) - Static method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified url and read timeout.
getResponse(String, String) - Static method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified url and query text.
getResponse(String, String, int) - Static method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified url, query text and read timeout.
getResponse() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the response message from the server.
getResultXml(CrmDiagnostic, ObjectFactory) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Return a Result JAXB object containing the detailed output statistics for this particular test.
getRetCounter() - Method in class ca.nrc.widar.vciMapper.Board
 
getRetDelayCounter() - Method in class ca.nrc.widar.vciMapper.Board
Read value of "retransmit delay conter".
getRms() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Calculates and returns the RMS value for this lag set.
getRowColumnId() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getRowColumnId() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getRowColumnId() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getRowCount() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
getRowCount() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
getRowCount() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
getRowForWafer(String, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getRowForWaferOne(String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getRowId(int) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
getRowId(int) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getRowNumber(Integer) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns the row number index of the CrmIssue associated with the supplied CrmIssue ID
getRowNumber(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns the row number index of the diagnostic associated with the supplied Diagnostic ID
getRxp(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getRxpConfigAsXml() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getRxpCrcErrorCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the number of RxpCrcErrors currently in the RxpCrcError XML ArrayList
getRxpCrcErrorList() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the ArrayList of RxpCrcError elements to the caller
getRxpInputsRequestUrlString() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the URL required to obtain the rxpInputs 'proc' file for this baseline board.
getRxpInputsXml() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Obtains the RxpInputs XML from the associated proc file on the CMIB for this board, unmarshalls the XML output into a JAXB Outputs object and returns that object to the caller.
getRxpInputsXml(int) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Queries the BlB Pair at the specified subband ID for the RxpInputs XML element.
getRxpInputsXmlList(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Queries all of the BlB Pairs in this quadrant for the RxpInputs XML elements and returns an ArrayList of those objects.
getRxpSyncTimeout() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getRxpSyncTimeout() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Reutrns the current RXP Synchronization timeout value in seconds
getSampleRate() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSampleRate() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getSampleRate() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getSampleRate() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getSampleRateAsString() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSampleRateAsString(long) - Static method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSampleRateForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSampleRateForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSampleSize() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSampleSize() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getSampleSize() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getSampleSize() - Method in class ca.nrc.widar.vciMapper.StbFilter
Sample size = number of bits for requantizer
getSampleSizeAsText(int) - Static method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSampleSizeForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSampleSizeForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSampleSizeForCmib(int) - Static method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSbId(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Returns the Subband ID stored for the specified data channel, or -1 if the data channel ID is out of range.
getSbid() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSbid() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getSbid() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getSbid() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getSbid() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
getSBID() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getSBID() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getSBID() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getSbidForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSbidForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getScanId() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getScrollableTracksViewportHeight() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
Overrides the JTable method.
getSdpp() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getSecondarySid() - Method in class ca.nrc.widar.vciMapper.CorrChip
This method is used for the Correlator Chip that belongs to a subarray with one row/colum per station - method is used to get Station ID for the "secondary" station, i.e.
getSegment() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getSelected() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Based on what the user has selected (ie.
getSelectedButton() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the selected button.
getSelectedButtonIndex() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the index of the selected button.
getSelectedFile() - Method in class edu.nrao.widar.gui.widget.RemoteFile
Displays a dialog box to allow selection of a file on the remote server and returns the contents of the selected file.
getSelectedFile() - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Displays a dialog box to allow selection of a file on the remote server and returns the contents of the selected file.
getSelectedFileLongName() - Method in class edu.nrao.widar.gui.widget.RemoteFile
Displays a dialog box to allow selection of a file on the remote server and returns the full-path name of the selected file.
getSelectedFileLongName() - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Displays a dialog box to allow selection of a file on the remote server and returns the full-path name of the selected file.
getSelectedFileShortName() - Method in class edu.nrao.widar.gui.widget.RemoteFile
Displays a dialog box to allow selection of a file on the remote server and returns the name of the selected file with no directory path prepended.
getSelectedFileShortName() - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Displays a dialog box to allow selection of a file on the remote server and returns the name of the selected file with no directory path prepended.
getSelectedIndex() - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Returns the index of the selected button.
getSelectedIndex() - Method in class edu.nrao.widar.gui.widget.ChoiceField
Returns the index of the current selection.
getSelectedSubIndex() - Method in class edu.nrao.widar.gui.widget.ChoiceField
Returns the sub-index of the current selection.
getSerialName(Element) - Static method in class edu.nrao.widar.util.ComponentInfo
Return the network 'serial name' of a WIDAR component.
getServerPushInputStream(String) - Static method in class edu.nrao.widar.util.HttpClientLink
Experimental.
getServerPushInputStream(String, int) - Static method in class edu.nrao.widar.util.HttpClientLink
Get an InputStream of data 'pushed' from the server with a specified URL String and readTimeout value.
getServerPushInputStream(String) - Static method in class edu.nrao.widar.util.HttpLink
Experimental.
getServerPushInputStream(String, int) - Static method in class edu.nrao.widar.util.HttpLink
Get an InputStream of data 'pushed' from the server with a specified URL String and readTimeout value.
getSettings() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getSettings() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Stores the current tab settings specific to this tab into a BlbHstSettings XML element for configuration storage purposes and returns that object to the caller
getSettings() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Generates and returns a CsdSettings XML object based on how this tab is currently configured
getSettings() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
Generates and returns a StbHstSettings XML object based on the current configuration of the tab
getSettings() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Stores the current tab settings specific to this tab into a BlbHstSettings XML element for configuration storage purposes and returns that object to the caller
getShortName(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Convenience method to return the short name of the selected file on the remote server.
getSid() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSid() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getSid() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getSid() - Method in class ca.nrc.widar.vciMapper.Station
 
getSID() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getSID() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getSide() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSide() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getSide() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getSidebandConfiguration(VciConfiguration.DataPath) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getSidForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSidForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSidForC() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSidFromStreamId(String) - Static method in class ca.nrc.widar.vciMapper.CbeProductFour
 
getSinglePhCenter() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getSizeOfLagChainList() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getSizeOfLagChainList() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getSlot() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the Slot ID for this Board
getSlot(int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the integer slot id of the StB within the station that is providing the signal from the specified baseband pair
getSlot() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getSlotId() - Method in class ca.nrc.widar.vciMapper.Board
 
getSlotId() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getSlotId() - Method in class ca.nrc.widar.vciMapper.Mlid
 
getSlotId() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getSlotName(int) - Method in class ca.nrc.widar.vciMapper.Crate
 
getSN() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the Serial Number of the Board
getSn() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getSnLockCount() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of component locks
getSnLockCount(DiagnosticType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the number of component locks for a particular diagnostic type
getSortByColumn() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Returns the column index of the column currenly serving as the sort criteria for the table
getSortDirection() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Returns to the caller an integer describing the direction of the current sort
getSourceId() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getSourceStreamId() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getSourceType() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getSpectralWindow(int) - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
getSpectralWindow(SwBbType, int) - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
getSpectralWindow(double, ArrayList<Integer>, ArrayList<Integer>, SwBbType, int) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getSrcGroupForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSrcGroupForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSrcGroupForC() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSrcStreamForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSrcStreamForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSrcWaferForA() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSrcWaferForB() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSrcWaferForC() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSsloConfiguration(VciConfiguration.DataPath) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getStackTrace() - Static method in class edu.nrao.widar.util.Log
Return a String of a default number of the last set of StackTraceElements.
getStackTrace(int) - Static method in class edu.nrao.widar.util.Log
Return a String of a specified number of the last set of StackTraceElements.
getStackTrace(String) - Static method in class edu.nrao.widar.util.Log
Return a String of StackTraceElements containing a specified String.
getStackTrace(Exception, String) - Static method in class edu.nrao.widar.util.Log
Return a String of StackTraceElements containing a specified String.
getStackTrace(Exception, int) - Static method in class edu.nrao.widar.util.Log
Return a String of a specified number of StackTraceElements for a specified java.lang.Throwable.
getStackTrace(Exception, int) - Static method in class edu.nrao.widar.util.Logger
Convenience method to provide a stack trace of an exception.
getStage() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getStandby() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
getStartBlock() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getStartTime() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns to the caller the Date value indicating the instantiation time for this instance of the CRM Server
getStartTime() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Returns the Start Time for this diagnostic, null if not present
getState(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns the state of the DIagnostic in the specified row
getState() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Return the current state of the SafetySwitch
getStatement() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Returns a Statement for any query requiring a Statement.
getStation(int) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getStation(int) - Method in class ca.nrc.widar.vciMapper.Subarray
 
getStationBoard(int, CrmCommon.Crate, int) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the Station Board object at the specified rack/crate/slot address in the currently defined model
getStationBoard(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getStationBoard(int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getStationBoardCrate(int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getStationBoardGuiTitle(Element) - Static method in class edu.nrao.widar.util.ComponentInfo
Returns a standardized Station Board GUI frame title String from a element.
getStationBoardList() - Static method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Retrieve an ArrayList containing CrmStationBoard objects within the current model
getStationBoardList(Integer) - Static method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Retrieve a Vector containing CrmStationBoard objects associated with the supplied station ID value.
getStationBoardRack(int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getStationBoards() - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the current HashMap containing all valid references to the StBs that comprise this 'Station'
getStationBoardSlot(int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getStationBoardStatus(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getStationBoardStatus(int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
getStationConfigXml(String, CsdModeType, int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
 
getStationID() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the Integer Station ID associated with this Board.
getStationID() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Return the integer representation for station ID.
getStationId() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getStationId() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Returns the current single station mode station ID
getStationId() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getStationInfo(Integer) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Relays the user supplied query string to all of the station boards associated with the user supplied station ID, obtains, combines (in the case of multiple station boards associated with the given station) and returns the resulting XML element.
getStationInStationRack() - Method in class ca.nrc.widar.vciMapper.Mlid
Four boards in station rack belong to the same station:

Slots 0 and 4 in crates 0 and 1 belong to the 1st station

Slots 1 and 5 in crates 0 and 1 belong to the 2nd station

Slots 2 and 5 in crates 0 and 1 belong to the 3rd station

Slots 3 and 7 in crates 0 and 1 belong to the 4th station

getStationMap() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Return a HashMap indexed by station ID containing CrmStation objects as values
getStations() - Method in class ca.nrc.widar.mccc.crm.CrmStationRack
Returns a list of station IDs that currently reside within the rack
getStationsAsHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrModel
Displays StationRacks/Stations as table Replaced method displayListOfStations.
getStationsAsHtmlTableH(StringBuilder, int[]) - Method in class ca.nrc.widar.vciMapper.Subarray
Displays Station Racks / Stations, uses color coding to indicate configuration change status.
getStationStatus() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getStationStatus() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getStationStatus() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getStationStatusCommand() - Method in class ca.nrc.widar.mccc.crm.CrmStation
 
getStationString() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the Station ID associated with this Board.
getStationString() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Return the string representation for station ID.
getStationXmlCommand(CsdModeType, int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
 
getStationXmlCommand(HashMap<String, StationBoard>) - Method in class ca.nrc.widar.mccc.crm.CrmStation
 
getStats(int, int, int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
Returns the count for the specified statistic, x, and y value
getStatsSum(int, int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
getStatus() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
getStatus() - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
getStatusChangeRecord() - Method in class ca.nrc.widar.vciMapper.Board
 
getStatusChangeRecord() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getStatusDescriptor() - Method in class ca.nrc.widar.vciMapper.Board
 
getStatusReportForActiveCfg() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getStatusReportForActTime(long) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getStatusReportForModelId(long) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getStatusReportForNextCfg() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getStatusValues() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Reports to the caller the cumulative status of the X/Y Sync Error, Accumulator overflow and overrun bits within this lag frame.
getStbConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.CorrModel
Check all the Baseline Boards and derive overall configuration change status.
getStbDefaultVci(ObjectFactory, Integer, Integer[]) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns a StationBoard XML element which contains the VCI XML element necessary to configure the Station Board to a 'Default' configuration.
getStbDiagnosticXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Creates and returns a Vector of Diagnostic XML objects based on the current configuration of components within the tab.
getStbForMlid(String) - Method in class ca.nrc.widar.vciMapper.Station
 
getStbInput(ObjectFactory, StbHstDpModeType) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns a StationBoard XML element which contains an Input element only, used to configure the Input Chip on a Station Board CMIB
getStbListXml() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the StbList XML object which contains a frontPanel XML element for each Station Board component within the model
getStbMlid() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getStbOutputDirect() - Method in class ca.nrc.widar.mccc.crm.CrmStation
Generate and return an Output XML element that represents a direct mapping of filter chip through the output chip.
getStbVci(ObjectFactory, String, StbHstDpModeType, StbHstDataType, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns a StationBoard XML element which contains the properly constructed VCI XML element used to configure the station board to the required state for diagnostic purposes.
getStbVci(ObjectFactory, String, StbHstDpModeType, StbHstDataType, Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns a StationBoard XML element which contains the properly constructed VCI XML element used to configure the station board to the required state for diagnostic purposes.
getStbWaferId() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getStId(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Returns the Station ID stored for the specified data channel, or -1 if the data channel ID is out of range.
getStn() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getStnid() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getStnModel(Integer) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Generates and returns a StnModel JAXB XML object which contains information pertinent to the configuration of the specified station ID.
getStnModelMap() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns a HashMap indexed by station ID that contains as values the StnModel JAXB XML object associated with a station ID
getStreamId() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getStreamId() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
getStreamId() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
getStreamIdFor(int, int, int) - Static method in class ca.nrc.widar.vciMapper.CbeProductFour
 
getStreamIdsAsString() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getStreamOneId() - Method in class ca.nrc.widar.vciMapper.CbeProductFour
 
getStreamTwoId() - Method in class ca.nrc.widar.vciMapper.CbeProductFour
 
getStringId() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the String id of this HttpLinkCallback instance.
getSubarray(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getSubarrayCbeDeconfigList() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getSubband() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the zero-based sub-band ID number for this baseline board taking into account that ONLY the ODD numbered slotted baseline boards are ever probed for information
getSubband() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getSubbandId(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns the integer sub band ID for the specified bbPair/wafer/data path
getSubbandIds() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
getSubbandIDsAsString(int, int) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getSubbandList() - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Returns a Set of integers representing the subband IDs of subbands defined or configured within this quadrant.
getSubBands() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Obtains the SubBands XML from the associated proc file on the CMIB for this board, unmarshalls the XML output into a JAXB SubBands object and returns that object to the caller.
getSubProduct() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getSubProduct() - Method in class ca.nrc.widar.vciMapper.LagChainSegment
 
getSumConfigId() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getSumInputStream() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getSumListOfStations() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getSummaryIndex(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the Summary Index value for the specified chip - see CrmBaselineBoardChip for a definition of the values used
getSummaryIndex() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getSummaryNRecs(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the Summary Record for the specified chip
getSummaryNRecs() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getSummedArray(int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getSummedArray(int, int, boolean, int, int) - Method in class ca.nrc.widar.vciMapper.Subarray
 
getSummedArrayList() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getSumSid() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getSumSid() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getSumSid() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getSwBbName() - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
getSwBbName() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getSwBbName() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getSwIndex() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getSwIndex() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getSwIndex() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
getSwitchId() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getSwmapDualListForPipeline() - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
getSwPwrEpoch() - Method in class ca.nrc.widar.vciMapper.StbDataPath
Get epoch for integration of Station Board swiched power counts.
getSwPwrInteg() - Method in class ca.nrc.widar.vciMapper.StbDataPath
Get switched power integration time in milliseconds (Station Board parameter).
getSyncCheck() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
getSyncCheck() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns the current Sync/CRC Error Check in seconds
getSystemXml() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
 
getTableCellRendererComponent(JTable, Object, boolean, boolean, int, int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
An override for the getTableCellRendererComponent method which returns the cell renderer for the requested header element
getTail(Handler) - Method in class ca.nrc.widar.vciMapper.VciMapperLogFormatter
 
getTcsStatus(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Returns the boolean flag corresponding to the supplied TimeCodeSource index, if the TCS index is valid.
getTcsStatus() - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
getText() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getText() - Method in class edu.nrao.widar.gui.widget.Clock
Returns a String of this clock's time.
getThreadState() - Method in class edu.nrao.widar.util.SnmpTrapManager
Returns the state of our trap listening Thread.
getTime() - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
A method which returns the current time as an XMLGregorianCalendar object
getTime() - Method in class edu.nrao.widar.gui.widget.Clock
Returns a String of this clock's time.
getTimeCodeSourceString(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the 'recirculator' XML object required to set the TimeCode Source value for ALL recirculator chips on this baseline board to the same value.
getTimeDiff(XMLGregorianCalendar) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getTimeFromActQueue() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Creates a list of Activation Times for configurations waiting to be activated.
getTimestamp(Timestamp, String) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Converts a supplied java.sql.Timestamp object to an XMLGregorianCalendar object, the timestamp object being derived from the specified column in the result set
getTimeString(int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getTimeString() - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
A method that generates a string time stamp of the current time surrounded by square brackets, the format is [HH:MM]
getTimeZone() - Method in class edu.nrao.widar.gui.widget.Clock
Returns a TimeZone of this clock.
getTitle() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getTitle() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
Returns the current tab title
getTitle() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Returns the current tab title
getTitle() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
Returns the current tab title
getTitle() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Returns the current tab title
getTotalBlocks() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
getTotalCompCount() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
getTotalCount() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getTotalError() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getTotalMemory() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns a long integer containing the amount of total memory currently available to the CRM JVM
getTotalNumLags() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getTotalNumLags() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getTotalZeroCount() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
getTotErrCount(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the total error count ( Comparison + status bit) for the specified chip and CCC
getTotErrCount() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getTotErrCount(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getTrapSource() - Method in class edu.nrao.widar.util.SnmpTrapManager.SnmpTrapEvent
 
getType() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Return the Board type
getType() - Method in class ca.nrc.widar.mccc.crm.CrmRack
Returns the type of Rack
getType() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getType() - Method in class ca.nrc.widar.vciMapper.Board
 
getType() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getType() - Method in class ca.nrc.widar.vciMapper.Rack
 
getType() - Method in class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
getUniformCfg() - Method in class ca.nrc.widar.vciMapper.Subarray
 
getUpTime() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the instantiation time in String format
getUrl(String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Returns a URL object which is the URL described in the supplied string.
getUrl() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
 
getUrl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Returns the current URL where the CRM DB is accessed
getUrl() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
getUrlHost() - Method in class edu.nrao.widar.util.HttpLink
Return a String of this HttpLink's host name or IP address whichever was used to create it.
getUrlPath() - Method in class edu.nrao.widar.util.HttpLink
Returns a String of this HttpLink's URL path.
getUrlPort() - Method in class edu.nrao.widar.util.HttpLink
Returns the port number that this HttpLink is set to.
getUrlQuery(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Supplied with an HTTP context, and a query string, this method returns a URL, ready to be sent to this Board MAH.
getUrlQuery() - Method in class edu.nrao.widar.util.HttpLink
Returns a String of this HttpLink's URL query portion.
getUrlString() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Returns a URL string with the IP address for this Board.
getUrlString(String) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
 
getUrlString() - Method in class edu.nrao.widar.util.HttpLink
Return a String representation of this HttpLink's URL.
getUrlString() - Method in class edu.nrao.widar.util.HttpLinkCallback
Returns the URL used in this communication.
getUseBlbIndicators() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getUseBlbsAllProds() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getUseBlbsIndicator() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getUseMode() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getUser() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Returns the current username for the CRM DB
getUseStatus() - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
getUseStatus() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.Board
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.Station
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
getUseStatus() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getUsingBlbsAllProds() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getUsingBlbsIndicator() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
getUTCTime() - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Obtain a timestamp string for the current UTC time
getVal(String) - Static method in class edu.nrao.widar.gui.widget.Util
Returns the int value of number String whose radix is based on the presence of of the leading chars "0x".
getVal(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Returns the int value of number String where the radix of the number String is passed as a parameter.
getVal(String) - Static method in class edu.nrao.widar.util.Num
Returns the int value of number String whose radix is based on the presence of of the leading chars "0x".
getVal(String, int) - Static method in class edu.nrao.widar.util.Num
Returns the int value of number String where the radix of the number String is passed as a parameter.
getValHex(String) - Static method in class edu.nrao.widar.gui.widget.Util
Returns the int value of hex number String.
getValHex(String) - Static method in class edu.nrao.widar.util.Num
Returns the int value of hex number String.
getValue() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.SignalPath
Returns the string representation of the enum value
getValue(String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Deprecated. Use getFieldText instead.
getValueAt(int, int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Returns the object to be inserted into the cell at the specified row and column coordinate of the table
getValueAt(int, int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Returns the object to be inserted into the cell at the specified row and column coordinate of the table
getValueAt(int, int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Returns the object at the specified row and column
getValues(String, String, String[]) - Static method in class edu.nrao.widar.util.SnmpUtil
Returns a Hashtable<String, Object> of OID/value pairs obtained from querying a specified host, with the specified 'community' (SNMP for password) and for specified array if OID strings.
getValues(byte[]) - Static method in class edu.nrao.widar.util.SnmpUtil
 
getValuesOnly(CrmDbAttributes) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Returns a String with only the values of all currently stored attributes in a format that is used when composing an SQL query string.
getVciDataPath(ObjectFactory, Integer, String[], Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns a VCI DataPath XML element used to configure a data path to the requested configuration.
getVciDataPathFilterConfig(ObjectFactory, Integer, Integer, Integer, Integer, Integer) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns a FilterConfig child for the VCI/DataPath XML element which will serve to configure a filter chip to the desired configuration.
getVciDataPathInputConfig(ObjectFactory, String) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Generates and returns an InputConfig child for the VCI/DataPath element.
getVciLog(LogRecord) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
getVciMessageAsString(int, int) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
 
getVciXmlAsString(Object) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
getVdifAgcEnabled() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifAgcRms() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifBitsPerSample() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifEpoch() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifEpochOffset() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifFrameSize() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
getVdifFrameSize() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifGain() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifPacketDelay(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifStation() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifThreadId(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifUseBlbIndicators() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifUseBlbsIndicators() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getVdifUsingBlbsIndicator() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getWafer() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getWaferReroute() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getWbcProduct(int) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getWindow() - Static method in class edu.nrao.widar.util.HttpLink
Returns a (reference to our) HttpLinkWindow.
getX() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Returns the X coordinate of this Chip
getX() - Method in class ca.nrc.widar.vciMapper.LagChainSegment
 
getXBarInput(int, int, int) - Method in class ca.nrc.widar.vciMapper.StationRack
 
getXbboard() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getXbInputWafer(int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getXbOutputWafer(int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
getXbrack() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getXbslot() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getXbwafer() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
getXGroupId() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getXInput0() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getXInput1() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getXInputSource() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getXInputStream() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getXmlActTime() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
getXmlCfg(char, String, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
getXmlConfig(int) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfig(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfig() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfigCrmFileList() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfigIndexList() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfigName(int) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfigName(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfigNameMap() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfigString(int) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlConfigString(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlForDisableEveryting() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
getXmlSourceDirectory() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
getXmlString(Object, Marshaller) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Return a string representation of the supplied JAXB XML element
getXmlString(ArrayList<Object>, Marshaller) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
A convenience method allowing a call to getXmlString when an ArrayList of JAXB objects is provided
getXmlString(Object) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Return a string representation of the supplied JAXB XML element
getXmlString(Object) - Method in class ca.nrc.widar.mccc.crm.CrmHttpHandler
Return a string representation of the supplied JAXB XML element
getXMLSupervisor() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
getXmlTrafficCount() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the number of XmlTraffic objects currently within the buffer
getXmlTrafficList() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns a copy of the ArrayList containing the XmlTraffic buffer
getXpp() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
getXRecirculator(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getXSwitchId() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getXSync(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the X-Synchronization status bit error count for the specified chip and CCC
getXSync() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getXSync(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getXWaferId() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
getY() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Returns the Y coordinate of this Chip
getY() - Method in class ca.nrc.widar.vciMapper.LagChainSegment
 
getYInput0() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getYInput1() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
getYInputSource() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getYInputStream() - Method in class ca.nrc.widar.vciMapper.CcCell
 
getYRecirculator(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
getYSync(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Returns the Y-Synchronization status bit error count for the specified chip and CCC
getYSync() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
getYSync(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
getZeroFillInvalidData() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
getZoneString() - Method in class edu.nrao.widar.gui.widget.Clock
Returns a String of this clock's time zone.
GRAY - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
GRAY - Static variable in class edu.nrao.widar.gui.widget.Led
 
GRAY - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
GRAY - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
GRAY - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
GREEN - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
GREEN - Static variable in class edu.nrao.widar.gui.widget.Led
 
GREEN - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
GREEN - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
GREEN - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
greenFg - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
gregorianCalendar - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
GUI_HEIGHT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
GUI_WIDTH - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
guiContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 

H

H - Static variable in class edu.nrao.widar.gui.widget.Sandbox
 
H - Static variable in class edu.nrao.widar.gui.widget.Sandbox2
 
halt() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Closes the current CrmDb Connection and sets the running variable to false, allowing the execution loop of this Thread to stop upon being interrupted.
halt(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
A method which receives the Diagnostic ID and clientHost for a diagnostic to be halted.
haltActiveButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
haltAllButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
haltFromActive(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
A method which halts an Active diagnostic
haltFromAnalyzing(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
A method which halts a BLB-HST Analysis diagnostic
haltFromQueue(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
A method which halts a diagnostic in Queue prior to that diagnostic being activated
handle(HttpExchange) - Method in class ca.nrc.widar.mccc.crm.CrmHttpHandler
Receives the incoming request over the HTTP port and based on the type of exchange that is detected, handles the request in the appropriate manner, generates the HTTP response and writes this to the Output Buffer
handle(HttpExchange) - Method in class ca.nrc.widar.vciMapper.CbeMessageHandler
 
handle(HttpExchange) - Method in class ca.nrc.widar.vciMapper.VciMessageHandler
 
handle(HttpExchange) - Method in class edu.nrao.widar.util.LogHandler
 
handle(HttpExchange) - Method in class edu.nrao.widar.util.RemoteFileHandler
 
handleModelAction(Diagnostic, DiagStateType) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
This method is called from the CrmGuiDiagTableModel upon registering an event in the CrmGuiDiagTableModel that is within the tab.
hasBbPair(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
hasNoBaseBands() - Method in class ca.nrc.widar.vciMapper.Station
 
hasSbid(int) - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
hasSubarray(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
hasSubband(int, int, int) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
hasSubband(int, int) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
hasValidResponse() - Method in class edu.nrao.widar.util.HttpLinkCallback
Indicates if a valid response was received from server.
hasVciMessageCreateSubarray(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
HCELL_END_START2_C_B - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
HCELL_START2_C_B - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
hCellEndStart2 - Static variable in class ca.nrc.widar.vciMapper.Subarray
 
hCellStart2 - Static variable in class ca.nrc.widar.vciMapper.Subarray
 
HEIGHT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
 
HEIGHT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
 
HEIGHT - Variable in class edu.nrao.widar.gui.widget.AboutPanel
Our height and width in pixels is made public to aid in placement in GUI panels.
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.Clock
The width and height in pixels are publically available to aid implementers with screen placement.
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.FanTachometer
 
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
height - Variable in class edu.nrao.widar.gui.widget.LedSized
 
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.McbRegisterPanel
The width and height in pixels are publically available to aid implementers with screen placement.
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
The width and height in pixels are publically available to aid implementers with screen placement.
HEIGHT - Variable in class edu.nrao.widar.gui.widget.PixelGrid
 
HEIGHT - Variable in class edu.nrao.widar.gui.widget.PixelGrid2
 
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.RefreshPanel
The width and height in pixels are publically available to aid implementers with screen placement.
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.RegisterSetBrowserPanel
The width and height in pixels are publically available to aid implementers with screen placement.
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
The width and height in pixels are publically available to aid implementers with screen placement.
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.SingleMcbRegisterPanel
The width and height in pixels are publically available to aid implementers with screen placement.
HEIGHT - Static variable in class edu.nrao.widar.gui.widget.SingleRegisterPanel
The width and height in pixels are publically available to aid implementers with screen placement.
HelpLabel - Class in edu.nrao.widar.gui.widget
Presents a 'Help Label'

HelpLabel(String) - Constructor for class edu.nrao.widar.gui.widget.HelpLabel
Creates a HelpLabel with the default icon, a specified message String positioned so the TOP LEFT corner of the widow is anchored to help icon.
HelpLabel(String, Font) - Constructor for class edu.nrao.widar.gui.widget.HelpLabel
Creates a HelpLabel with the default icon, a specified message String, in a specified Font, positioned so the TOP LEFT corner of the widow is anchored to help icon.
HelpLabel(String, int) - Constructor for class edu.nrao.widar.gui.widget.HelpLabel
Creates a HelpLabel with the default help icon, a specified message String and a specified corner appearing near the mouse location.
HelpLabel(String, int, Font) - Constructor for class edu.nrao.widar.gui.widget.HelpLabel
Creates a HelpLabel with the default help icon, a specified message String and a specified corner appearing near the mouse location using a specified font for the message.
HelpLabel(String, String, int) - Constructor for class edu.nrao.widar.gui.widget.HelpLabel
Creates a HelpLabel with a specified image (icon) name, message and specified corner that should appear near the mouse location.
HelpLabel(String, String, int, Font) - Constructor for class edu.nrao.widar.gui.widget.HelpLabel
Creates a HelpLabel with a specified image (icon) name, message, specified corner that should appear near the mouse location and specified message font.
hierarchyChanged(HierarchyEvent) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
 
highlight(boolean) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Highlight IP Address field.
highlight(boolean) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
hLogPanel - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperLogPanel
 
host - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
hstMode - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
HTML_BLACK - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
HTML_BLACK - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
HTML_BLACK - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
HTML_BLANK - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
HTML_BLUE - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
HTML_BLUE - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
HTML_BLUE - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
HTML_BOARD_STATUS_PAGE - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
HTML_BR - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
HTML_FONT1 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
HTML_FONT2 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
HTML_FONT3 - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
HTML_GREEN - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
HTML_GREEN - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
HTML_GREEN - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
HTML_HEIGHT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
HTML_HOME_PAGE - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
HTML_RED - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
HTML_RED - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
HTML_RED - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
HTML_SUBBAND_PAGE - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
HTML_WIDTH - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
htmlCommonHeader(StringBuilder, boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
HTML Interface: Common hader used on home page and most other pages.
htmlCorrModelRelLink(CorrModel, String, String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
htmlHomeLink - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
htmlLinkForDisabledBoards() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
htmlLinkForMostRecentLogs() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
htmlListOfSubarraysWithBoardStatus(StringBuilder, String) - Method in class ca.nrc.widar.vciMapper.CorrModel
Display list of subarray for Corr ModelPage 2: .
htmlListOfSubarraysWithSubbands(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrModel
Display list of subarray for Corr ModelPage 2: .
htmlTableWithBoardStatus(StringBuilder, String, int[], BaselineBoard[][][]) - Method in class ca.nrc.widar.vciMapper.Subarray
 
htmlTableWithSubbands(StringBuilder, int[], BaselineBoard[][][]) - Method in class ca.nrc.widar.vciMapper.Subarray
 
htmlTimeMillis - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
HTTP_DEFAULT_PORT - Static variable in class edu.nrao.widar.util.HttpLink
The HTTP Protocol's default port.
HttpAsyncLink - Class in edu.nrao.widar.util
A psuedo 'non-blocking' HTTP communciation Thread.
HttpAsyncLink(String, String, DataReadyListener, int, int, String) - Constructor for class edu.nrao.widar.util.HttpAsyncLink
 
HttpClientLink - Class in edu.nrao.widar.util
HTTP based communications link for Client components of the WIDAR correlator.
HttpClientLink() - Constructor for class edu.nrao.widar.util.HttpClientLink
 
HttpClientLink.HttpAsyncClientLink - Class in edu.nrao.widar.util
A psuedo 'non-blocking' HTTP communciation Thread.
HttpClientLink.HttpAsyncClientLink(String, String, DataReadyListener, int, int, String) - Constructor for class edu.nrao.widar.util.HttpClientLink.HttpAsyncClientLink
 
HttpClientLink.HttpAsyncClientLink(String, String, DataReadyListener, int, DataReadyEvent) - Constructor for class edu.nrao.widar.util.HttpClientLink.HttpAsyncClientLink
 
HttpClientLink.HttpClientLinkWindow - Class in edu.nrao.widar.util
 
HttpClientLinkExample - Class in edu.nrao.widar.util
 
HttpClientLinkExample() - Constructor for class edu.nrao.widar.util.HttpClientLinkExample
 
httpLink - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to transmit XML messages
HttpLink - Class in edu.nrao.widar.util
HTTP based communications link for components of the WIDAR correlator.
HttpLink(String) - Constructor for class edu.nrao.widar.util.HttpLink
Create an HTTP Communication Link on the default port.
HttpLink(String, String) - Constructor for class edu.nrao.widar.util.HttpLink
Create an HTTP Communication Link with on the default port with a specified path.
HttpLink(String, String, String) - Constructor for class edu.nrao.widar.util.HttpLink
Create an HTTP Communication Link on the default port with a specified path & query.
HttpLink(String, int) - Constructor for class edu.nrao.widar.util.HttpLink
Create an HTTP Communication Link on a specified port.
HttpLink(String, int, String) - Constructor for class edu.nrao.widar.util.HttpLink
Create an HTTP Communication Link with a specified port & path.
HttpLink(String, int, String, String) - Constructor for class edu.nrao.widar.util.HttpLink
Create an HTTP Communication Link with a specified port, path & query.
HttpLink.HttpLinkWindow - Class in edu.nrao.widar.util
 
HttpLinkCallback - Class in edu.nrao.widar.util
An object that contains pertinent information about an HttpLink communication.
HttpLinkCallback(int) - Constructor for class edu.nrao.widar.util.HttpLinkCallback
Contructs an HttpLinkCallback with a specified numerical id.
HttpLinkCallback(String) - Constructor for class edu.nrao.widar.util.HttpLinkCallback
Contructs an HttpLinkCallback with a specified String id.
HttpLinkCallbackEvent - Class in edu.nrao.widar.util
An event that indicates that HttpLink has completed an asynchronous (non-blocking) communication.
HttpLinkCallbackEvent(Object, int, HttpLinkCallback) - Constructor for class edu.nrao.widar.util.HttpLinkCallbackEvent
Constructs an HttpLinkCallbackEvent.
HttpLinkCallbackListener - Interface in edu.nrao.widar.util
The listener interface for receiving callback events from HttpLink.
httpLinkCalledBack(HttpLinkCallbackEvent) - Method in interface edu.nrao.widar.util.HttpLinkCallbackListener
 
HttpLinkException - Exception in edu.nrao.widar.util
Thrown when an exception occurs during an HttpLink communication.
HttpLinkException(String) - Constructor for exception edu.nrao.widar.util.HttpLinkException
Constructs an HttpLinkException with the specified detail message.
HttpServerLink - Class in edu.nrao.widar.util
HTTP based communications link for Server components of the EVLA WIDAR Correlator.
HttpServerLink(int) - Constructor for class edu.nrao.widar.util.HttpServerLink
Create an HttpServerLink with a specified port, default size of the FixedThreadPool, handler map and HTML generator.
HttpServerLink(int, int) - Constructor for class edu.nrao.widar.util.HttpServerLink
Create an HttpServerLink with a specified port, specified FixedThreadPool size, handler map and HTML generator.
HttpServerLink.LogUrlFilter - Class in edu.nrao.widar.util
 
HttpServerLink.LogUrlFilter() - Constructor for class edu.nrao.widar.util.HttpServerLink.LogUrlFilter
 
httpStatusIsOk() - Method in class edu.nrao.widar.util.HttpLinkCallback
Indicates if a good response was received from the server.
httpStatusOk - Variable in class edu.nrao.widar.util.HttpLinkCallback
True if HTTP response code from server is 200 - OK.

I

id - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
id - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 
idCheck(CrmLagFrame) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Compares the station, subband and baseband IDs between the current lag frame, and the supplied lag frame.
identicalListofStationIds(ArrayList<Integer>, ArrayList<Integer>) - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
identifyCorrModel() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
identifyCorrModel(CorrModel) - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
idFormat - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
idsAsString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
idsToString() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
ifdChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
imPeakValue - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
in() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Return the color to be used for input modes of this Baseband type
incCounter() - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
Increment counter for each transmitted message.
incMsgsRejByJaxb() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Increase number of messages rejected by JAXB
incMsgsRejByVciM() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Increase number of messages rejected by vciMapper
incMsgsRejByVciM() - Method in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
incQueryCounter() - Method in class ca.nrc.widar.vciMapper.Board
 
incRetCounter() - Method in class ca.nrc.widar.vciMapper.Board
 
incVciReqMsgs() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Increase number of received vciRequest messages
indicatorPanel - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
indWidth - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
info(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_INFO' status
info(String) - Static method in class edu.nrao.widar.util.Log
Log an INFO message.
INFORMATION_MESSAGE - Static variable in class edu.nrao.widar.gui.widget.Util
 
init() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Overrides the init method of the super class.
init() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Initializes all storage
init() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineRack
Overrides the super class initialization method with functionality specific to the Baseline Rack
init() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Method handling the initialization of the newly created instance of Board.
init() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Initializes all diagnostic info container objects and sets concurrent diagnostic limits.
init() - Method in class ca.nrc.widar.mccc.crm.CrmRack
Method handling the initialization of the newly created instance of Rack.
init() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Overrides the init method of the super class.
init() - Method in class ca.nrc.widar.mccc.crm.CrmStationRack
Overrides the super class initialization method with functionality specific to the Station Rack
init() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Initializes all major counters and lists
initCbeMarshaller() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Initiate all necessary objects before we can start marshalling and unmarshalling XML strings
initCmStatusMarshaller() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
initComponentMarshaller() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
initControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Initialize the control part of the tab window, adding all components necessary to characerize this particular diagnostic.
initControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Initialize the control part of the tab window, adding all components necessary to characerize this particular diagnostic.
initControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
Initialize the control part of the tab window, adding all components necessary to characerize this particular diagnostic.
initControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Initialize the control part of the tab window, adding all components necessary to characerize this particular diagnostic.
initControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabTest
Initialize the control part of the tab window, adding all components necessary to characerize this particular diagnostic.
initCrmMarshaller() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
WJS, 8/7/2012 Add the methods needed to unmarshall the CRM Error Report.
initIndicator() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Method to initialize the indicator panel.
initIndicator() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Initialize the indicator part of the tab window, adding an execute button, and any LED components necessary for this diagnostic.
initIndicator() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Initialize the indicator part of the tab window, adding an execute button, and any LED components necessary for this diagnostic.
initIndicator() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
Initialize the indicator part of the tab window, adding an execute button, and any LED components necessary for this diagnostic.
initIndicator() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Initialize the indicator part of the tab window, adding an execute button, and any LED components necessary for this diagnostic.
initIndicator() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabTest
Initialize the control part of the tab window, with Java Swing components to be used to configure this diagnostic prior to execution.
initJaxb() - Method in class ca.nrc.widar.mccc.crm.CrmQuery
A method to initialize JAXB objects for the Query
initLog(String) - Static method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
initModel() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Initializes all variables used in the analysis of BLB-HST data during a diagnostic
initRecirc() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
initTest() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
TEST - A method that initializes objects used in test phase
initTest() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
TEST - A method that initializes objects used in test phase
initVciMarshaller() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
inPhaseData - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
INPUT_DATA_STREAMS - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
INPUT_STREAM_A - Static variable in class ca.nrc.widar.vciMapper.SummedArray
 
INPUT_STREAM_B - Static variable in class ca.nrc.widar.vciMapper.SummedArray
 
INPUT_WAFERS - Static variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
Number of wafers in the Baseline Board input
inputForThisSubarrayConfigured(String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
inputFromAntenna - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
inputNotXml - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
insertBoard(Board) - Method in class ca.nrc.widar.vciMapper.Crate
Insert board into specified slot
insertBoard(Board) - Method in class ca.nrc.widar.vciMapper.Rack
 
INSTATE - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
INTER_FRAME_DELAY_ALG_DEFAULT - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
INTER_FRAME_DELAY_DEFAULT - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
INTER_FRAME_DELAY_MAX - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
INTER_FRAME_DELAY_MIN - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
INTER_FRAME_DELAY_RANDOMIZER_ON - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
interFrameDelayConfigChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
interFrameDelayRandomizerOn() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
internalStreamEquals - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
interruptOnce(ActionListener, Date) - Method in class edu.nrao.widar.gui.widget.Clock
Interrupt (fire an ActionEvent) a single listener at a specified java.util.Date
interruptOnce(ActionListener, long) - Method in class edu.nrao.widar.gui.widget.Clock
Interrupt (fire an ActionEvent) a single listener after a specified amount time starting now.
interruptOnce(ActionListener, Date, int) - Method in class edu.nrao.widar.gui.widget.Clock
Interrupt (fire an ActionEvent) a single listener at a specified java.util.Date with specified return ID.
interruptOnce(ActionListener, long, int) - Method in class edu.nrao.widar.gui.widget.Clock
Interrupt (fire an ActionEvent) a single listener after a specified amount time starting now.
interruptPeriodically(ActionListener, long, int) - Method in class edu.nrao.widar.gui.widget.Clock
Interrupt (fire an ActionEvent) a single listener recurringly at a specified rate and with a specified action event ID.
interruptPeriodically(ActionListener, Date, long, int) - Method in class edu.nrao.widar.gui.widget.Clock
Interrupt (fire an ActionEvent) a single listener recurringly starting at a specified time and at a specified rate and with a specified action event ID.
INVALID_SUB_BAND_ID - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
invalidCfgForProduct - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
ipAddress - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
ipAddress - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
isActive() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
isActive() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
 
isActive() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Returns the response the the query of whether the VariableLed is active or not.
isActive() - Method in class edu.nrao.widar.gui.widget.VariableLed
Returns the response the the query of whether the VariableLed is active or not.
isActiveModel() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
isAlarmed() - Method in class edu.nrao.widar.gui.widget.ReadField
Return the field's alarm state.
isAlive() - Method in class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
Returns 'true' if the pool is alive
isAnalyzeAfter() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the analyze data flag
isAnalyzeCollectOnly() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the analyze data flag
isAnalyzeData() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the analyze data flag
isAnalyzeDuring() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the analyze data flag
isBlbEnabled(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isBlbHSXmlConfigAlive() - Static method in class ca.nrc.widar.mccc.crm.Crm
 
isBlbInputWaferEnabled(int, int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isBlBPresent(int, CrmCommon.Crate, int) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns a boolean identifying whether a baseline board pupulates the specified rack/crate/slot of the system in its current configuration
isBlue() - Method in class edu.nrao.widar.gui.widget.Led
Returns the whether or not the Led is blue.
isBlue() - Method in class edu.nrao.widar.gui.widget.LedElement
Returns the whether or not the Led is blue.
isBlue() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to determine if this path is 'blue'.
isCleanupAll() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the 'cleanup all' menu item
isCleanupGood() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the 'cleanup good' menu item
isCleanupNone() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the 'cleanup none' menu item
isClosedOff() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to return whether or not the switch is in the CLOSED_OFF state.
isClosedOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to return whether or not the switch is in the CLOSED_ON state.
isColumnEnabled(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isColumnEnabled(Mlid, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isColumnSortable(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Returns a boolean indicating whether the indicated column is sortable.
isComparable(CrmLagFrame) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
DEPRECATED (no longer used) Determines whether the supplied CrmLagFrame is comparable to this lag frame by comparing all properties of both lag frames that should be identical in order to continue with an actual lag-by-lag comparison.
isConfigured() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns the configuration status.
isConnected() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Return the status of the DB connection
isConsoleOpen() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the state of the log console window
isCopy() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
isCorrChipEnabled(int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isCsdReturnMode() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
isDataPathEnabled(int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
isDataReady() - Method in class ca.nrc.widar.mccc.crm.CrmComm.SmallDataReadyListener
Returns a boolean indicating whether data has been returned from the query
isDbAlive() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the basic operational state of the CRM Database server
isDbMode() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the DB Server mode flag
isDbMode() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
isDebugMode() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the Debug Mode flag
isDebugMode() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the debug mode flag
isDiagConcurrentChanged() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns a boolean indicating whether the value for concurrent diagnostic has recently changed.
isDiagMode() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the Diagnostic mode flag
isDiagMode() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
isDiagnosticAnalyzing(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
REturns a boolean indicating whether or not the diagnostic specified by unique ID is stored in the list of diagnostics currently undergoing analysis
isDiagnosticComplete(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns a boolean indicating whether or not the diagnostic specified by unique ID is currently stored in the diagComplete hash
isDiagnosticQueued(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns a boolean indicating whether or not the diagnostic specified by unique ID are stored in the appropriate queue awaiting execution.
isDiagnosticRunning(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns a boolean indicating whether or not the diagnostic of the specified unique ID is currently active
isDiagQueueAlive() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the basic operational status of the Diagnostic Queue
isDirectory(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Returns a boolean of the File being Directory.
isDriverLoaded() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Return the status of the DB Driver
isEmpty(int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns a boolean indicating whether or not the diagnostic queue of the specified type is empty
isEmpty() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns a boolean indicating whether or not the diagnostic queue is empty
isEmpty() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
 
isEmpty() - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
 
isEmpty() - Method in class ca.nrc.widar.vciMapper.ControlQueue
 
isEmpty() - Method in class ca.nrc.widar.vciMapper.Subarray
 
isEnabled() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Returns the enabled status of the execute button to the caller
isEnabled() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
Returns the enabled status of the execute button to the caller
isEnabled() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Returns the enabled status of the execute button to the caller
isEnabled() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
isEnabled() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
isEnabled() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
isEnabled() - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Convenience method to return whether or not the switch is enabled.
isFDiff() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the FDiff flag
isFile(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Returns a boolean of the File being 'normal' file (see java.io.File) api.
isFilterEnabled(Mlid, int, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isFilterEnabled(int, int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
isFourBitCorr() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
isGreen() - Method in class edu.nrao.widar.gui.widget.Led
Returns the whether or not the Led is green.
isGreen() - Method in class edu.nrao.widar.gui.widget.LedElement
Returns the whether or not the Led is red.
isGreen() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to determine if this path is 'green'.
isGuiHost(String) - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns a boolean indicating whether or not the supplied GUI hostName is included in the CRM GUI Host list
isHighlighted() - Method in class edu.nrao.widar.gui.widget.ServerPanel
Return whether or not we are highlighted (busy/not busy).
isIdle() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Baseline Board is idle if all Recirculation Controllers are idle.
isIdle() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isIdle() - Method in class ca.nrc.widar.vciMapper.CcCell
 
isIdle() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
isIdleAndEnabled() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isInstantiated - Static variable in class edu.nrao.widar.util.Log
 
isInWaferDisabled(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isInWaferEnabled(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isLfrAlive() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the basic operational status of the Lag Frame Receiver.
isLfrSocketOpen() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the basic operational status of the Lag Frame Receiver Socket
isMemConsoleOpen() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the state of the log console window
isNotUsed() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
isOff() - Method in class edu.nrao.widar.gui.widget.Led
Returns the whether or not the Led is off.
isOff() - Method in class edu.nrao.widar.gui.widget.LedElement
Returns the whether or not the Led is off.
isOff() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to determine if this path is 'off'.
isOff() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to return whether or not the switch is in the OFF state.
isOn() - Method in class edu.nrao.widar.gui.widget.Led
Get the ON/OFF state of the Led.
isOn() - Method in class edu.nrao.widar.gui.widget.LedElement
Get the ON/OFF state of the Led.
isOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to return whether or not the switch is in the ON state.
isOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Convenience method to return whether or not the switch is in the ON state.
isOn() - Method in class edu.nrao.widar.gui.widget.VariableLed
Returns the response the the query of whether the VariableLed is active or not.
isOpen() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Returns a boolean flag indicating the state of the LagFrameReceiver
isOpenOff() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to return whether or not the switch is in the OPEN_OFF state.
isOpenOn() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to return whether or not the switch is in the OPEN_ON state.
isOrange() - Method in class edu.nrao.widar.gui.widget.LedElement
Returns the whether or not the Led is orange.
isOutputPresent(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Returns an indication of whether there is output reported at the RxpInputs of the specified subband within the quadrant from the supplied station ID
isOutWaferDisabled(int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
isOutWaferEnabled(int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
isPair() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
isPair() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
isPairMember() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
isPairMember() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
isPink() - Method in class edu.nrao.widar.gui.widget.Led
Returns the whether or not the Led is pink.
isPink() - Method in class edu.nrao.widar.gui.widget.LedElement
Returns the whether or not the Led is pink.
isPink() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to determine if this path is 'pink'.
isPresent(CrmCommon.Crate, Integer) - Method in class ca.nrc.widar.mccc.crm.CrmRack
Gives an indication to the caller whether a specified board is present within the rack
isQueueRunning() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns the value of the diagQRunning flag to the caller
isRecContEnabled(BaselineBoard.Side, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isRecContEnabled(int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isRed() - Method in class edu.nrao.widar.gui.widget.Led
Returns the whether or not the Led is red.
isRed() - Method in class edu.nrao.widar.gui.widget.LedElement
Returns the whether or not the Led is off.
isRed() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to determine if this path is 'red'.
isRowColumnEnabled(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isRowColumnEnabled(Mlid, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isRowEnabled(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
isRowEnabled(Mlid, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isRunning() - Static method in class ca.nrc.widar.mccc.crm.CrmDb
Return the status of the Db Server
isSafeMode() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Returns the value of the safe mode flag
isSame(int, int) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
isSameEpoch(CrmLagFrame) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Compares the epoch of the supplied lag frame with that of this lag frame.
isSelected() - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Returns the on/off state of the switch.
isSelected() - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Returns selected the on/off state of the switch.
isSend() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
 
isSetBbId(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Returns a boolean true if the baseband ID is set to a value other than -1 (the initialization default), or false if either the supplied data channel value is invalid or the subband ID is less than 0.
isSetDestIpDefault() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
isSetDestIpDefault() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns a boolean describing whether the default destination IP Address is being used or not
isSetDestMacDefault() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
isSetDestMacDefault() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Returns a boolean describing whether the default destination MAC Address is being used or not
isSetIpAddress() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Returns 'true' if the ipAddress attribute is set in the Diagnostic XML
isSetIpAddress() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Returns 'true' if the ipAddress attribute is set in the Diagnostic XML
isSetIpAddress() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
isSetSbId(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Returns a boolean true if the subband ID is set to a value other than -1 (the initialization default), or false if either the supplied data channel value is invalid or the subband ID is less than 0.
isSetStage() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
isSetStId(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Returns a boolean true if the station ID is set to a value other than -1 (the initialization default), or false if either the supplied data channel value is invalid or the subband ID is less than 0.
isSetSubband() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
isSevenBitCorr() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
isSnLock(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Returns a boolean indicating whether the specified component SN is currently locked out (ie.
isSnLock(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
 
isStandby() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
isStandby() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
isStationBoardPresent(int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Returns a boolean true if the station board within this station specified by the bbPair ID is actually present with configuration information (ie.
isStationPresent(int) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Informs the caller as to whether or not the specified station ID resides within the current correlator model
isStbDataPathEnabled(Mlid, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isStbEnabled(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isStbOutWaferEnabled(Mlid, int) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isStBPresent(int, CrmCommon.Crate, int) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Returns a boolean identifying whether a baseline board pupulates the specified rack/crate/slot of the system in its current configuration
isStbWbcEnabled(Mlid) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
isStreamOne(String) - Method in class ca.nrc.widar.vciMapper.CbeProductFour
 
isStreamTwo(String) - Method in class ca.nrc.widar.vciMapper.CbeProductFour
 
issueListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
isSystemWide() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
isSystemWide() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Returns the boolean status of the system wide selection checkbox
isTestMode() - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
isUnknown() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to determine if this path is 'unknown'.
isUsed() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
isUsed() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
isUsed() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isUsed() - Method in class ca.nrc.widar.vciMapper.Board
 
isUsed() - Method in class ca.nrc.widar.vciMapper.CcCell
 
isUsed() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
isUsed() - Method in class ca.nrc.widar.vciMapper.Station
 
isUsed() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
isUsed() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
isUsed() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
isUsedFor(String, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isUsedFor(PolarizationProduct, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isUsedFor(int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isUsedFor(String) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
isUsedForSegment(int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isUsedForSubband(PolarizationProduct) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isUsedForSubbandSegment(PolarizationProduct, int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isUsedForSum(SummedArray, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
isValid() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Compares the reported checksum with the calculated checksum and returns the result
isValidIndex(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
isWbcEnabled() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
isXmlMonitorMode() - Static method in class ca.nrc.widar.mccc.crm.Crm
Returns the xmlMonitorMode flag
isYellow() - Method in class edu.nrao.widar.gui.widget.Led
Returns the whether or not the Led is yellow.
isYellow() - Method in class edu.nrao.widar.gui.widget.LedElement
Returns the whether or not the Led is yellow.
isYellow() - Method in class edu.nrao.widar.gui.widget.LedPath
Convenience method to determine if this path is 'yellow'.
itemStateChanged(ItemEvent) - Method in class edu.nrao.widar.gui.widget.ActionGroup
History of detecting and reporting an component state change.
itemStateChanged(ItemEvent) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
History of detecting and reporting a button state change.

K

keepListening() - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
keepListening() - Method in class ca.nrc.widar.vciMapper.ThreadCrmListener
 
keyPressed(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
keyPressed(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
keyPressed(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileEditor
 
keyReleased(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
keyReleased(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
keyReleased(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileEditor
 
keyTyped(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
keyTyped(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
keyTyped(KeyEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileEditor
 
kill() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
kill() - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Kills and nullifies all storage variables
killDb() - Static method in class ca.nrc.widar.mccc.crm.Crm
Interrupts and kills the database connection thread.
killDiagQueue() - Static method in class ca.nrc.widar.mccc.crm.Crm
Interrupts and kills the Diagnostic Queue.
killLfr() - Static method in class ca.nrc.widar.mccc.crm.Crm
Interrupts and kills the current Lag Frame Receiver thread and closes the socket.
killModel() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Destroys all variables used in the analysis of BLB-HST data during a diagnostic
killRecirc() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
knowsPassword(String, String) - Static method in class edu.nrao.widar.gui.widget.PasswordDialog
Display a Dialog Box with a password field and return a boolean of whether or not the password was correct.
knowsPassword(Component, String, String) - Static method in class edu.nrao.widar.gui.widget.PasswordDialog
Display a Dialog Box with a password field and return a boolean of whether or not the password was correct and return focus to the calling method's Container.

L

label() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.SignalPath
 
label() - Method in enum ca.nrc.widar.mccc.crm.CrmLog.ErrorLevel
 
LABEL_POS_BOTTOM - Static variable in class edu.nrao.widar.gui.widget.BlankPanel
 
LABEL_POS_LEFT - Static variable in class edu.nrao.widar.gui.widget.BlankPanel
 
LABEL_POS_RIGHT - Static variable in class edu.nrao.widar.gui.widget.BlankPanel
 
LABEL_POS_TOP - Static variable in class edu.nrao.widar.gui.widget.BlankPanel
 
LAG - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
LagChainSegment - Class in ca.nrc.widar.vciMapper
Lag Chain Segment.
LagChainSegment() - Constructor for class ca.nrc.widar.vciMapper.LagChainSegment
 
LagChainSegment(Mlid, int, int, int, int) - Constructor for class ca.nrc.widar.vciMapper.LagChainSegment
 
LagChainSegment(Mlid, int, int, int, int, SubProductType) - Constructor for class ca.nrc.widar.vciMapper.LagChainSegment
 
lagCheck(CrmLagFrame) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Compares the individual lags (IP and Q) between this lag frame, and the supplied lag frame.
lagCount - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
lastCbeAlert - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
lastVciAlert - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
Led - Class in edu.nrao.widar.gui.widget
An LED GUI component.
Led() - Constructor for class edu.nrao.widar.gui.widget.Led
 
Led(String, String) - Constructor for class edu.nrao.widar.gui.widget.Led
Create an Led with specified label and color Strings.
Led(String) - Constructor for class edu.nrao.widar.gui.widget.Led
Create an Led with specified label in the OFF state.
Led(String, Color) - Constructor for class edu.nrao.widar.gui.widget.Led
Create an Led with a specified label and On-state color.
Led(String, Color, boolean) - Constructor for class edu.nrao.widar.gui.widget.Led
Create an Led with a specified label, color and of/off state.
Led4Segment - Class in edu.nrao.widar.gui.widget
A small square, 4-segmented LED GUI component.
Led4Segment() - Constructor for class edu.nrao.widar.gui.widget.Led4Segment
 
Led4Segment(Color[], String) - Constructor for class edu.nrao.widar.gui.widget.Led4Segment
 
LedElement - Class in edu.nrao.widar.gui.widget
A small square LED element GUI component.
LedElement() - Constructor for class edu.nrao.widar.gui.widget.LedElement
 
LedElement(String) - Constructor for class edu.nrao.widar.gui.widget.LedElement
 
LedElement(String, String) - Constructor for class edu.nrao.widar.gui.widget.LedElement
Create an Led with specified label and color Strings.
LedElement(String, Color) - Constructor for class edu.nrao.widar.gui.widget.LedElement
Create an Led with a specified label and On-state color.
LedElement(String, Color, boolean) - Constructor for class edu.nrao.widar.gui.widget.LedElement
Create an Led with a specified label, color and of/off state.
LedPath - Class in edu.nrao.widar.gui.widget

DO NOT USE THIS CLASS YET - it is still in progress.
LedPath(int, int, int, int, boolean, boolean, Color, float) - Constructor for class edu.nrao.widar.gui.widget.LedPath
Create an LedPath specified by a GeneralPath and set to a specified Color.
LedPath(GeneralPath, Color) - Constructor for class edu.nrao.widar.gui.widget.LedPath
Create an LedPath specified by a GeneralPath and set to a specified Color.
LedSized - Class in edu.nrao.widar.gui.widget
A WIDAR GUI LED component whose size is specified.
LedSized(int, int) - Constructor for class edu.nrao.widar.gui.widget.LedSized
Creates a rectangular Led of specified width and height.
LedSized(int, int, Color) - Constructor for class edu.nrao.widar.gui.widget.LedSized
Creates a rectangular Led of specified width, height and color.
left - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
LEFT - Static variable in class edu.nrao.widar.gui.widget.Switch
 
letterString - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
lfrRegisterDiagnostic(CrmDiagnostic) - Static method in class ca.nrc.widar.mccc.crm.Crm
Registers a Diagnostic object with the LFR.
lfrSocket - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
lfrSocketPort - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
limit - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
link - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
listActQueue() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
listContent(boolean) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Print content of Configuration Queue in log window.
listContent() - Method in class ca.nrc.widar.vciMapper.ControlQueue
 
listOfMessagesAsHtmlTable(StringBuilder, String) - Method in class ca.nrc.widar.vciMapper.CorrModel
Display list of mapped messages in HTML format.
listOfMessagesAsStrBuffer() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
listOfMessagesAsString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
listOfMessagesIsEmpty() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
listOfStationsAsString() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
listOfStationsWithBoardsAsHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.Subarray
Print list of stations that belong to subarray.
listRequest - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
listUsedBlbs() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
listUsedBlbs() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
listUsedBlbs(StringBuilder, StringBuilder) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
listUsedBlbsAsHtml(StringBuilder) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Add rows to HTML table.
LITTLE - Static variable in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
load() - Static method in class edu.nrao.widar.util.SystemProperties
Loads the properties specified in the main properties file.
load(String) - Static method in class edu.nrao.widar.util.SystemProperties
Loads the properties from a specified file into the JVM's System Properties.
loadSettings(Object) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
loadSettings(Object) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Accepts a BlbHstSettings XML element from the CRM GUI and applies the configurations specific to this tab to the screen
loadSettings(Object) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Applies configuration information specific to this tab to the GUI
loadSettings(Object) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
Updates the tab configuration based on the supplied StbHstSettings XML object
loadSettings(Object) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Accepts a SysSettings XML element from the CRM GUI and applies the configurations specific to this tab to the screen
loadSystemProperties(String) - Static method in class edu.nrao.widar.util.PropertiesHandler
 
loadSystemProperties(URL) - Static method in class edu.nrao.widar.util.PropertiesHandler
 
loChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
LOCK_DONT_USE - Static variable in class edu.nrao.widar.gui.widget.LogPane
 
LOCK_IN_USE - Static variable in class edu.nrao.widar.gui.widget.LogPane
 
LOCK_OKAY_TO_USE - Static variable in class edu.nrao.widar.gui.widget.LogPane
 
loConfigChange - Variable in class ca.nrc.widar.vciMapper.StbDataPath
Indication whether or not local oscillator was specfied in the VCI message.
log(VciLogLevel, String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
log(LogRecord) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
Log - Class in edu.nrao.widar.util
A utility class providing static logging methods for consistent logging behavior amongst the various WIDAR components.
Log() - Constructor for class edu.nrao.widar.util.Log
 
Log(String) - Constructor for class edu.nrao.widar.util.Log
Start the Log for this JVM.
log(String, String) - Static method in class edu.nrao.widar.util.Logger
 
Log.WidarArchiveFormatter - Class in edu.nrao.widar.util
 
Log.WidarArchiveFormatter() - Constructor for class edu.nrao.widar.util.Log.WidarArchiveFormatter
 
Log.WidarConsoleFormatter - Class in edu.nrao.widar.util
 
Log.WidarConsoleFormatter() - Constructor for class edu.nrao.widar.util.Log.WidarConsoleFormatter
 
Log.WidarDebugLogFormatter - Class in edu.nrao.widar.util
 
Log.WidarDebugLogFormatter() - Constructor for class edu.nrao.widar.util.Log.WidarDebugLogFormatter
 
Log.WidarSystemLogFormatter - Class in edu.nrao.widar.util
 
Log.WidarSystemLogFormatter() - Constructor for class edu.nrao.widar.util.Log.WidarSystemLogFormatter
 
Log.WidarTemperaturesLogFormatter - Class in edu.nrao.widar.util
 
Log.WidarTemperaturesLogFormatter() - Constructor for class edu.nrao.widar.util.Log.WidarTemperaturesLogFormatter
 
Log.WidarTrapsLogFormatter - Class in edu.nrao.widar.util
 
Log.WidarTrapsLogFormatter() - Constructor for class edu.nrao.widar.util.Log.WidarTrapsLogFormatter
 
LOG_CHANGE - Static variable in class ca.nrc.widar.vciMapper.Board
 
LOG_HEIGHT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
LOG_WIDTH - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
logAsXml - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
logBlbMessages - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable/enable logging of the XML messages to the log file.
logCbeMessages - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable/enable logging of the XML messages to the log file.
logCrmMessages - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable/enable logging of the XML messages to the log file.
logFile - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
logFileName - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
logFormatter - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
logger - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
Logger - Class in edu.nrao.widar.util
A utility class providing java.util.logging.Loggers for use by WIDAR components for consistent logging levels, destinations and formats throughout the software system.
Logger() - Constructor for class edu.nrao.widar.util.Logger
 
Logger.WidarArchiveFormatter - Class in edu.nrao.widar.util
 
Logger.WidarArchiveFormatter() - Constructor for class edu.nrao.widar.util.Logger.WidarArchiveFormatter
 
Logger.WidarConsoleFormatter - Class in edu.nrao.widar.util
 
Logger.WidarConsoleFormatter() - Constructor for class edu.nrao.widar.util.Logger.WidarConsoleFormatter
 
Logger.WidarDebugLogFormatter - Class in edu.nrao.widar.util
 
Logger.WidarDebugLogFormatter() - Constructor for class edu.nrao.widar.util.Logger.WidarDebugLogFormatter
 
Logger.WidarLogLevel - Class in edu.nrao.widar.util
 
Logger.WidarLogLevel(String, int) - Constructor for class edu.nrao.widar.util.Logger.WidarLogLevel
 
Logger.WidarOperatorLogFormatter - Class in edu.nrao.widar.util
 
Logger.WidarOperatorLogFormatter() - Constructor for class edu.nrao.widar.util.Logger.WidarOperatorLogFormatter
 
Logger.WidarSystemLogFormatter - Class in edu.nrao.widar.util
 
Logger.WidarSystemLogFormatter() - Constructor for class edu.nrao.widar.util.Logger.WidarSystemLogFormatter
 
loggerInstance - Static variable in class ca.nrc.widar.vciMapper.VciMapperLogWindow
There can be only one instance of the Log Window !
LogHandler - Class in edu.nrao.widar.util
WIDAR Correlator Server internal Log Handler.
LogHandler() - Constructor for class edu.nrao.widar.util.LogHandler
 
logListOfLogs(VciLogLevel, String, List<LogRecord>) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
logNoOptions(LogRecord) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
Logo - Class in edu.nrao.widar.gui.widget
A Logo GUI component.
Logo(String) - Constructor for class edu.nrao.widar.gui.widget.Logo
Create a logo.
Logo(String, int, int) - Constructor for class edu.nrao.widar.gui.widget.Logo
Create a logo of a specified size.
LogPane - Class in edu.nrao.widar.gui.widget
LogPane.
LogPane(int, int, String) - Constructor for class edu.nrao.widar.gui.widget.LogPane
Create a LogPane of a specified size with a specified String supplying the IP address of the server.
LogPane(int, int, JTextField) - Constructor for class edu.nrao.widar.gui.widget.LogPane
Create a LogPane of a specified size with a specified JTextField supplying the IP address of the server.
logRcInputAndOutput() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
LogServlet - Class in edu.nrao.widar.util
 
LogServlet() - Constructor for class edu.nrao.widar.util.LogServlet
 
logStbMessages - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable/enable logging of the XML messages to the log file.
logToFile - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
logToLogWindow - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
logVciMessages - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable/enable logging of the XML messages to the log file.
logXAlerts - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable/enable logging of the XML messages to the log file.
logXbbMessages - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Used to disable/enable logging of the XML messages to the log file.
logXmlMessage(String, String, String, long, String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Writes XML messages to log file.
loop() - Method in class edu.nrao.widar.gui.widget.Sound
 
loop(int) - Method in class edu.nrao.widar.gui.widget.Sound
 
LOW_POWER_SAMPLE_RATE - Static variable in class ca.nrc.widar.vciMapper.BlbDataStream
 
LOWER - Static variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
Baseline Board has two RXP chips: 0 and 1 RXP 1 is the lower RXP (on the board).
LOWER_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Crate
 
LTA - Static variable in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
ltaBank - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
ltaBin - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
ltaBlockFrames(String) - Method in class ca.nrc.widar.vciMapper.CcCell
SV 2011-11-25 Block frames in LTA in the case of CBE configuration failure.
ltaChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
ltaPortChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 

M

magCheck(CrmLagFrame) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Method which takes the supplied CrmLagFrame and compares to the current lag frame.
MAH_COMM_PORT - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
mahContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
mail(String) - Static method in class edu.nrao.widar.util.Log
Send an email
mail(String, String, long) - Static method in class edu.nrao.widar.util.Log
 
mail(String) - Static method in class edu.nrao.widar.util.Logger
 
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.Crm
The Main method
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
The Main method
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
The Main method
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Main Method used in running this queue as a stand-alone object
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmHttpServer
A main method which will allow the server to be run as a stand-alone application
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
A 'main' method to be used to start the CrmLagFrameReceiver for testing purposes
main(String[]) - Static method in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
Main method for testing purposes
main(String[]) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Main
main(String[]) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
The main method for use as a stand-alone application (usually for testing purposes)
main(String[]) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
The main method for use as a stand-alone application (usually for testing purposes)
main(String[]) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
main(String[]) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
main(String[]) - Static method in class ca.nrc.widar.vciMapper.VciHttpServer
 
main(String[]) - Static method in class edu.nrao.widar.gui.widget.FanTachometer
 
main(String[]) - Static method in class edu.nrao.widar.gui.widget.RegisterSetBrowserGui
Starts RegisterSetBrowserGui when used standalone.
main(String[]) - Static method in class edu.nrao.widar.gui.widget.RemoteFileEditor
 
main(String[]) - Static method in class edu.nrao.widar.gui.widget.Sandbox
 
main(String[]) - Static method in class edu.nrao.widar.gui.widget.Sandbox2
 
main(String[]) - Static method in class edu.nrao.widar.gui.widget.Sound
 
main(String[]) - Static method in class edu.nrao.widar.gui.widget.StreamViewer
{*code main} method is provided for stand-alone operation.
main(String[]) - Static method in class edu.nrao.widar.util.HttpClientLinkExample
 
main(String[]) - Static method in class edu.nrao.widar.util.SpigotListener
 
main(String[]) - Static method in class edu.nrao.widar.util.TestHttpServer
 
main(String[]) - Static method in class edu.nrao.widar.util.XmlTest
 
MAIN_PROPERTY_FILE - Static variable in class edu.nrao.widar.util.SystemProperties
This is the name of the main property file that, among other things, specifies other property files to load.
MainBoardFrame - Class in edu.nrao.widar.gui.widget
Abstract Super Class for Board-Level Gui Screens.
MainBoardFrame() - Constructor for class edu.nrao.widar.gui.widget.MainBoardFrame
Constructs a blank MainBoardFrame with a MenuBar populated with common menu items.
MainFpgaFrame - Class in edu.nrao.widar.gui.widget
Abstract Super Class for Board-Level Gui Screens.
MainFpgaFrame() - Constructor for class edu.nrao.widar.gui.widget.MainFpgaFrame
Construct a blank MainFpgaFrame with a MenuBar populated with common menu items.
MainFrame - Class in edu.nrao.widar.gui.widget
Deprecated. use MainBoardFrame and MainFpgaFrame instead. There were too many menu differences between main board and individual divice GUIs so they were split into Board and FPGA main frames.
MainFrame() - Constructor for class edu.nrao.widar.gui.widget.MainFrame
Deprecated. Construct a blank MainFrame with a MenuBar populated with common menu items.
makeComponentAddressString(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Composes a R/C/S address for the component based on the values in the Diagnostic XML object
makeComponentAddressString(CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Composes a R/C/S address for the component based on the values in the Diagnostic XML object
makeComponentAddressString(String, Integer, Integer, Integer) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Composes a R/C/S address for the component based on the provided values
makeComponentSnString(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Composes a Serial Number string for the component based on the values in the Diagnostic XML object
makeComponentSnString(String, String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Composes a Serial Number string for the component based on the values in the Diagnostic XML object
makeDbError(String, String) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Creates a Crm Db Error XML object that can be returned to an application describing an error state within the CRM as a result of a query or a request to the CRM from that application.
makeError(String, CrmLog.ErrorLevel) - Method in class ca.nrc.widar.mccc.crm.CrmHttpHandler
Returns an Error XML object to the caller based on the supplied information.
makeError(String, CrmLog.ErrorLevel, Exception) - Method in class ca.nrc.widar.mccc.crm.CrmHttpHandler
Returns an Error XML object to the caller based on the supplied information.
makeHtmlSafe(String) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
 
makeIPAddress(CrmCommon.RackType, int, int, int) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
Return a string representation of an IP address, based upon the position of a board within the system, and the scheme for assigning IP addresses devised by WIDAR system engineers.
mappingCompleted - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
mappingFailed - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
mappingForBaselineBoards(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
This method should be called when:

- Station Board configuration has been determined

- Configuration for the X-Bar Switches have been determined,

- Baseline Boards have been assigned.

mappingForRegProducts(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Perform mapping for 'regular' polarization products.
marshalCrmArchive(ResultSet, ArrayList<String>) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Marshals and returns a CrmArchive object from the ResultSet of an executed SQL query on the CRMDb NOTE that when the CrmArchive object is modified in the crmDb.xsd schema - ie.
marshalCrmIssue(ResultSet, ArrayList<String>) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Marshals and returns a CrmIssue object from the ResultSet of an executed SQL query on the CRMDb NOTE that when the CrmIssue object is modified in the crmDb.xsd schema - ie.
marshalException - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
MAX_BAND_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MAX_BASEBANDS_PER_STATION - Static variable in class ca.nrc.widar.vciMapper.Station
 
MAX_BB_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MAX_BCE_INT_MF - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_BLB_PAIR_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MAX_BLF_SIZE - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
 
MAX_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Board
 
MAX_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Crate
 
MAX_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MAX_DATA_PATH_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MAX_DEC_FACTOR - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_EVLA_BASELINE_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MAX_EVLA_BL_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MAX_EVLA_ST_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MAX_EVLA_STATION_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MAX_FILTER_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MAX_FILTER_ID - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_HW_INT_MF - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_HW_INTEG_TIME - Static variable in class ca.nrc.widar.vciMapper.StationBoard
Supported range for the "Minimum Hardware Integration Time" in micro seconds
MAX_ID - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
MAX_ID - Static variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
MAX_ID - Static variable in class ca.nrc.widar.vciMapper.Station
 
MAX_INPUT_WAFER_ID - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
MAX_LAGS - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
MAX_LTA_INT_MF - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_MULTICAST_MESSAGE_SIZE - Static variable in class edu.nrao.widar.util.Log
Break up large monitor data archive XMLs into smaller lengths the MultiCast is happy with (it can't do more than 64K at a time).
MAX_OUTPUT_ID - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_QUAD_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MAX_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Board
 
MAX_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MAX_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Rack
 
MAX_REC_FACTOR - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_SAMPLE_RATE - Static variable in class ca.nrc.widar.vciMapper.BlbDataStream
 
MAX_SLOT_ID - Static variable in class ca.nrc.widar.vciMapper.Board
 
MAX_SLOT_ID - Static variable in class ca.nrc.widar.vciMapper.Crate
 
MAX_SLOT_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MAX_SPECTRAL_CHANNELS - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_STBs_PER_STATION - Static variable in class ca.nrc.widar.vciMapper.Station
 
MAX_SUB_BAND_ID - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MAX_SUBBANDS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
MAX_WAFER_ID - Static variable in class ca.nrc.widar.vciMapper.StbOutputWafer
 
McbRegisterPanel - Class in edu.nrao.widar.gui.widget
A Sub-Panel to allow reading and writing a single register in any device on a board using a 16-bit address.
McbRegisterPanel(ServerPanel) - Constructor for class edu.nrao.widar.gui.widget.McbRegisterPanel
Creates a new McbRegisterPanel using a ServerPanel to supply and dynamically maintain the server's IP Address.
McbRegisterPanel(JTextField) - Constructor for class edu.nrao.widar.gui.widget.McbRegisterPanel
Creates a new McbRegisterPanel using a JTextField to supply and dynamically maintain the server's IP Address.
McbRegisterPanel(String) - Constructor for class edu.nrao.widar.gui.widget.McbRegisterPanel
Creates a new McbRegisterPanel using a String to supply an IP address that is not dynamically maintained
mccc - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
mcccForHtmlLink - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
MCCC address for HTML links: For production version running on MCCC: http://mccc.evla.nrao.edu:8081 For CM running on the local machine: http://127.0.0.1:8081
mcccListRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
memConsole - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
menuBar - Variable in class edu.nrao.widar.gui.widget.MainBoardFrame
 
message(CrmLog.ErrorLevel, String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with the provided status level
mFpga - Variable in class edu.nrao.widar.gui.widget.MainBoardFrame
 
miLoadConfig - Variable in class edu.nrao.widar.gui.widget.MainBoardFrame
 
miLoadProgram - Variable in class edu.nrao.widar.gui.widget.MainBoardFrame
 
miLoadProgram - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
miLock - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
MIN_BAND_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MIN_BB_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MIN_BCE_INT_MF - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_BLB_PAIR_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MIN_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Board
 
MIN_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Crate
 
MIN_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MIN_DATA_PATH_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MIN_DEC_FACTOR - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_EVLA_BASELINE_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MIN_EVLA_BL_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MIN_EVLA_ST_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MIN_EVLA_STATION_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MIN_FILTER_ID - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
MIN_FILTER_ID - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_HW_INT_MF - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_HW_INTEG_TIME - Static variable in class ca.nrc.widar.vciMapper.StationBoard
Supported range for the "Minimum Hardware Integration Time" in micro seconds
MIN_ID - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
MIN_ID - Static variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
MIN_ID - Static variable in class ca.nrc.widar.vciMapper.Station
 
MIN_INPUT_WAFER_ID - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
MIN_LTA_INT_MF - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_OUTPUT_ID - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_QUAD_ID - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
MIN_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Board
 
MIN_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MIN_RACK_ID - Static variable in class ca.nrc.widar.vciMapper.Rack
 
MIN_REC_FACTOR - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_SLOT_ID - Static variable in class ca.nrc.widar.vciMapper.Board
 
MIN_SLOT_ID - Static variable in class ca.nrc.widar.vciMapper.Crate
 
MIN_SLOT_ID - Static variable in class ca.nrc.widar.vciMapper.Mlid
 
MIN_SPECTRAL_CHANNELS - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_SUB_BAND_ID - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
MIN_WAFER_ID - Static variable in class ca.nrc.widar.vciMapper.StbOutputWafer
 
miNew - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
miQuit - Variable in class edu.nrao.widar.gui.widget.MainBoardFrame
 
miQuit - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
miReadFile - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
miReadHw - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
miWriteFile - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
miWriteHw - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
miWriteMultipleHw - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
MJD_OF_JAVA_DATE_0 - Static variable in class edu.nrao.widar.util.Num
 
mjdToJavaDate(String) - Static method in class edu.nrao.widar.util.Num
Returns a java.util.Data from a String MJD value.
mjdToJavaDate(int) - Static method in class edu.nrao.widar.util.Num
Returns a java.util.Data from a non-fractional MJD value.
mjdToJavaDate(double) - Static method in class edu.nrao.widar.util.Num
Returns a java.util.Data from a fractional MJD value.
mkdir(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Create a directory.
mlid - Variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
Module Location ID - Board ID based on the position of the board
mlid - Variable in class ca.nrc.widar.vciMapper.Board
Module Location ID - Board ID based on the position of the board
mlid - Variable in class ca.nrc.widar.vciMapper.BoardStatus
Module Location ID - Board ID based on the position of the board
Mlid - Class in ca.nrc.widar.vciMapper
Module Location ID as defined in the System Numbering Plan String representation fo MLID is as follows: rack-crate-slot, e.g.
Mlid() - Constructor for class ca.nrc.widar.vciMapper.Mlid
default constructor
Mlid(int, int, int) - Constructor for class ca.nrc.widar.vciMapper.Mlid
Constructor.
Mlid(int, int, int, String) - Constructor for class ca.nrc.widar.vciMapper.Mlid
Constructor.
Mlid(String) - Constructor for class ca.nrc.widar.vciMapper.Mlid
Constructor.
MODE_ADD - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
MODE_UPDATE - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
MODE_VIEW - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
modelContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
MODIFIED_REGISTERS - Static variable in class edu.nrao.widar.gui.widget.RawRegistersPanel
Specifies that when writing the register values back to hardware to send only the values of the registers that have modified (as opposed to all of them.
modifyBaseBandForSubsetOfStations(int, int, BaseBand, List<Station>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
modifyCcGain() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
modifyFilterConfigurationAsXml(VciConfiguration.DataPath) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
modifyFilterConfigurationAsXml(List<VciConfiguration.DataPath.FilterConfig>) - Method in class ca.nrc.widar.vciMapper.StbFilter
This method can be used to set all modifed parameters.
modifyInterFrameDelay(InterFrameDelayAlgType, int, boolean) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Find all used boards and set new interframe delay parameters.
modifyRfiBlankingDuration(int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
modifyRfiBlankingDuration(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
This method is used when VCI modify sybarray is received.
modifyRfiDetectionLevel(int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
modifyRfiDetectionLevel(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
This method is used when VCI modify sybarray is received.
modifySioForAllStations(StationInputOutput, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
modifySioForListOfStations(StationInputOutput, ArrayList<Station>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
modifySubarray(Subarray, SubArray, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
Parse modify subarray.
modifySum(SummedArray, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Modify sum for existing subarray.
modifySummedArray(SummedArray, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
modifySummedArray(SummedArray, ArrayList<Integer>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
Parse parameters that can be modified: - list of excluded stations - vdif enable/disable - agc and gain related parameters Ignore other parameters.
modifyVdifGain() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
monoPlain10 - Static variable in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
monoPlain11 - Static variable in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
monoPlain9 - Static variable in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
mostRecentLogRecords - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
This filed is used to save the last generated LogRecord with logging level greater than INFO.
mouseClicked(MouseEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab.ColumnHeaderListener
 
mouseClicked(MouseEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab.ColumnHeaderListener
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ChoiceField
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.HelpLabel
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
mouseClicked(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ChoiceField
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.HelpLabel
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
mouseEntered(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ChoiceField
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.HelpLabel
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
mouseExited(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ChoiceField
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.HelpLabel
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
mousePressed(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ChoiceField
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.HelpLabel
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
mouseReleased(MouseEvent) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
 
mpHeight - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
mpWidth - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
mScreen - Variable in class edu.nrao.widar.gui.widget.MainBoardFrame
 
MSEC_OF_MJD_0 - Static variable in class edu.nrao.widar.util.Num
 
MSEC_PER_DAY - Static variable in class edu.nrao.widar.util.Num
 
MultiChooser - Class in edu.nrao.widar.gui.widget
A popup utility that displays a matrix of toggle buttons used to select multiple devices.
MultiChooser(String, String[], String[]) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser
Create a two-dimensional MultiChooser.
MultiChooser(String, String[], String[], int, int) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser
Create a two-dimensional MultiChooser.
MultiChooser(String, String[], String[], String) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser
Create a two-dimensional MultiChooser.
MultiChooser(String, String[], String[], String, int, int) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser
Create a two-dimensional MultiChooser.
MultiChooser(Frame, String, String[], String[], String, Point) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser
Create a two-dimensional MultiChooser.
MultiChooser(Frame, String, String[], String[], String, Point, int, int) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser
Create a two-dimensional MultiChooser.
MultiChooser.ChooserButton - Class in edu.nrao.widar.gui.widget
 
MultiChooser.ChooserButton(String, int, int, int, int) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
MultiChooser.ChooserButton(String, int, int, int, int, boolean) - Constructor for class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
multiSocket - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Multicast socket used to transmit VCI responses and reports.
myIds() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
myIdsAsString() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
myLogLevel - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Log level selected via GUI.

N

N - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
N - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
N_BASEBANDS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_BASEBANDS_PER_IF - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_BLB_CCC_PER_CHIP - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_BLB_CHIPS_PER_ROW - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_CCC - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
N_CCC - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
N_CHAN - Static variable in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
N_CHIPS_X - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
N_CHIPS_Y - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
N_COLS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_COMP - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
N_COMPARISON - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
N_CSD_MODES - Static variable in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
N_DIAG - Static variable in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
 
N_DP - Static variable in class ca.nrc.widar.mccc.crm.CrmStationBoard
 
N_DP - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
N_DP - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
N_EX_ELEMENTS - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
N_F - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
N_F - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
N_IFS_PER_SWITCH - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_MAX_BASELINE_RACKS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_MAX_STATION_RACKS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_MAX_STATIONS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_MAX_SUB_ARRAYS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_PECHAN - Static variable in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
N_QUADRANTS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_ROWS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_SB - Static variable in class ca.nrc.widar.mccc.crm.CrmStationBoard
 
N_SB - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
N_SB - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
N_STAGES - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
N_STAGES - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
N_STREAMS - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
N_SUBBANDS - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_TCS - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
N_TCS - Static variable in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
N_X - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
N_XML_TRAFFIC - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
N_Y - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
NA - Static variable in class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
NAME - Static variable in class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
 
NarrowOptionPane - Class in edu.nrao.widar.gui.widget
A fixed-width, word wrapping JOptionPane.
NarrowOptionPane() - Constructor for class edu.nrao.widar.gui.widget.NarrowOptionPane
 
nBlocks - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
nCrates() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Return the number of crates defined for this RackType
NEW_DB_HOST - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
newLineReason - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
newPeakDiff(double, int, int, int, int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Given a new absolute peak difference, tests the value against the stored maximum peak difference for the entire board and replaces if the provided value is higher.
newPeakDiff(double) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
Assign a new value to Peak Difference
newPeakDiff(double, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Replace the Peak Difference for this chip on the specified CCC with the supplied value
newXmlTraffic(XmlTraffic, String, String, String, String, Boolean, String) - Static method in class ca.nrc.widar.mccc.crm.Crm
Creates and returns a new XmlTraffic JAXB object populated with the specified parameters
nextCallbackId - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Callback ID used for HttpClientLink.asyncQuery() Reading and writing of long is not atomic - that's why we use synchronized version.
nextFrame() - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Returns the next Lag Frame from the file
nextWord() - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Reads and returns the next 4-byte word in the file according to the current pointer location.
NL_ERROR - Static variable in class ca.nrc.widar.vciMapper.Board
 
NL_INFO - Static variable in class ca.nrc.widar.vciMapper.Board
 
nLags - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
NO - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
no - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
NO_CHANGE - Static variable in class ca.nrc.widar.vciMapper.Board
 
NO_HOME_LINK - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
noConfigChange() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
noConfigChange() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
noConfigChange() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
noConfigChange() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
noConfigChange() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
noConfigChange() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
noRecirculation - Static variable in class ca.nrc.widar.vciMapper.StbDumpTrig
 
noRefMessage - Static variable in class ca.nrc.widar.mccc.crm.CrmHttpHandler
 
noRefMessage - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
noResponse - Static variable in class ca.nrc.widar.vciMapper.BoardStatus
 
notice(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_NOTICE' status
nowButton - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
nSlots() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Return the number of slots per crate defined for this RackType
Num - Class in edu.nrao.widar.util
General purpose static convenience methods for formatting numbers and converting them to and from Strings.
Num() - Constructor for class edu.nrao.widar.util.Num
 
NUM_BB - Static variable in class ca.nrc.widar.mccc.crm.CrmQuadrant
An instance of a CRM JAXB unmarshaller
NUM_BB - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
NUM_CC_COLUMNS - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
Number of columns of Correlator Chips
NUM_CC_ROWS - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
Number of rows of Correlator Chips
NUM_DP - Static variable in class ca.nrc.widar.mccc.crm.CrmQuadrant
An instance of a CRM JAXB unmarshaller
NUM_DP - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
NUM_DP - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
NUM_FILTERS - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
NUM_INPUT_WAFERS - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
Number of input wafers
NUM_INPUT_WAFERS - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
NUM_OUT_WAFERS - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
NUM_Q - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
NUM_QUADS - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
NUM_SB - Static variable in class ca.nrc.widar.mccc.crm.CrmQuadrant
An instance of a CRM JAXB unmarshaller
NUM_SB - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
NUM_STB - Static variable in class ca.nrc.widar.mccc.crm.CrmQuadrant
An instance of a CRM JAXB unmarshaller
NUM_STB - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
NUM_STN - Static variable in class ca.nrc.widar.mccc.crm.CrmQuadrant
An instance of a CRM JAXB unmarshaller
NUM_W - Static variable in class ca.nrc.widar.mccc.crm.CrmQuadrant
An instance of a CRM JAXB unmarshaller
NUM_W - Static variable in class ca.nrc.widar.mccc.crm.CrmStation
 
NUM_WAFERS - Static variable in class ca.nrc.widar.vciMapper.StbOutputWafer
 
numberOfChoices() - Method in class edu.nrao.widar.gui.widget.ChoiceField
Returns the number of choices available.
numCccNotAsExpected - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
NumRecStreams - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 

O

OFF - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
off - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
OFF - Static variable in class edu.nrao.widar.gui.widget.Led
 
OFF - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
OFF - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
OFF - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
ok - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
OldServerPanel - Class in edu.nrao.widar.gui.widget
A Sub-Panel to provide information about a CMIB server of a common nature and to provide activation of screen refreshes from the server and facilitate writing the screen state to the server.
OldServerPanel(String) - Constructor for class edu.nrao.widar.gui.widget.OldServerPanel
Creates a new OldServerPanel with the default refresh interval.
OldServerPanel(String, ActionListener) - Constructor for class edu.nrao.widar.gui.widget.OldServerPanel
Creates a new OldServerPanel with the default refresh interval.
OldServerPanel(String, ActionListener, int) - Constructor for class edu.nrao.widar.gui.widget.OldServerPanel
Creates a OldServerPanel with a specified refresh period.
on - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
oneSegmentOnePpPerCorrChipRq4HalfStMaxProd(PolarizationProduct, int, int, int, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Configure one segment.
oneSumOneProduct(SummedArray, PolarizationProduct, int, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
OPEN_OFF - Static variable in class edu.nrao.widar.gui.widget.SafetySwitch
 
OPEN_ON - Static variable in class edu.nrao.widar.gui.widget.SafetySwitch
 
openNewFile() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
Open a new file to receive packets from this receiver to the local disk
openStream(String) - Method in class edu.nrao.widar.gui.widget.StreamViewer
 
openStream(String, boolean) - Method in class edu.nrao.widar.gui.widget.StreamViewer
 
operStatus - Variable in class ca.nrc.widar.vciMapper.BoardStatus
Status of the component as reported by CMIB or other subsystem.
ORANGE - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
ORANGE - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
ORANGE - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
orderBy - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
out() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Return the color to be used for output modes of this Baseband type
OUTPUT_DATA_STREAMS - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
outputDir - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Directory where to put files generated by this application.
outputFromRec() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
outputFromRec() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
OUTPUTS_PER_DATA_PATH - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
OUTPUTS_PER_DATA_PATH - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
outputsFile - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
outWaferAdminStatusAsString(int) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Admin status for Station Baord output wafers.
OVR_BIT - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 

P

packetDelayKnown(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
paint(Graphics) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Override of the component paint method.
paint(Graphics) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
An override of the JTable paint method.
paint(Graphics) - Method in class edu.nrao.widar.gui.widget.Led4Segment
 
paint(Graphics) - Method in class edu.nrao.widar.gui.widget.LedSized
 
paint(Graphics) - Method in class edu.nrao.widar.gui.widget.VariableLed
Override of the component paint method.
paintComponent(Graphics) - Method in class ca.nrc.widar.vciMapper.VciConfigMapperLogPanel
 
paintComponent(Graphics) - Method in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.FanTachometer
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.LedPath
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.LogPane
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.RotatableTextPanel
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.Sandbox
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.Sandbox2.FlashPath
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.Sandbox2
 
paintComponent(Graphics) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
paintEmptyRows(Graphics) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
A method which paints the alternating striping onto the portion of the table that is not being used.
PAIRS_IN_QUAD - Static variable in class ca.nrc.widar.vciMapper.CorrModel
 
parse(Station, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
Parse element station (child of the element subarray/listOfStations).
parseAndCheckActiveConfig(Component) - Method in class ca.nrc.widar.vciMapper.Board
Check if configuration is active.
parseAndCompare(PolProducts, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
This method is used when more than one instance of the element stationInputOutput
parseAndCompare(SummedArray, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
Not implemented - Commented out pol.product related code so that it can be used as a model.
parseAndFlushCmibQueues(CmFlushCmibQueues, StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
parseAntenna(String, Antenna) - Method in class ca.nrc.widar.vciMapper.Station
Parse element antenna (child of the element stationHw), set antenna ID, type and name.
parseAutoCorrMode(PolProducts, long, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Parse products for Autocorrelator Mode Autocorrelator mode works for 4-bit data streams only.
parseBaseBandPairForListOfStations(int, int, String, BaseBand, List<Station>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
parseBbElem(Bb) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
parseBbParamsForCreate(BbParams, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StbDataPath
Parse element bbParams for "create subarray".
parseBbpElemForModify(BbParams, List<Station>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Parse element bbParams for "modify subarray".
parseBurstMode(BurstMode) - Method in class ca.nrc.widar.vciMapper.BurstMode
Parses "subarray/stationInputOutput/baseband/subband/burstMode"
parseCallbackForConfig(DataReadyEvent) - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
parseCallbackForQuery(DataReadyEvent) - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
parseCC(Cc, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
Parse element cc
parseCmibOperStatus(String) - Static method in class ca.nrc.widar.vciMapper.BoardStatus
 
parsePolProducts(PolProducts, long, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Parse element polProducts and set parameters for this PolProductGroup.
parseQueryStatusChange(QueryCfgStatus) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
parseRadarMode(int, RadarMode, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
parseRadarMode(RadarMode) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
parseSioForAllStations(StationInputOutput, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Parse element subarray/stationInputOutput and configure all the stations in the subarray.
parseSioForListOfStations(StationInputOutput, ArrayList<Station>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Parse element subarray/stationInputOutput for the list of stations.
parseStation(Station, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
Parse element station child of the element subarray/listOfStations or of element subarray/stationInputOutput.
parseStationHw(StationHw, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
Parse element stationHw

If there is no such station, create and add a new station.

parseStationIO(SubArray, Subarray, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
Create subarray: Parse stationInputOutput
parseStatus(Component) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
Parse received response, save operational status and other parameters.
parseStatus(Component) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Parse received response, save operational status and other parameters.
parseSubarray(SubArray, CorrModel, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Parse VCI configuration - element ca.nrc.widar.jaxb.vci.SubArray

Action can be specified as: create, modify or delete.

parseSubBandPairForListOfStations(int, PolarizationType, int, PolarizationType, SubBand, SwBbType, ArrayList<Station>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
parseSummedArray(SummedArray, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
Parse element summedArray
parseSummedArrayForSbPair(List<SummedArray>, int, PolarizationType, int, PolarizationType, int, PolProductGroup, ArrayList<Station>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
parseToneExtraction(int, ToneExtraction, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
parseToneExtraction(ToneExtraction) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
parseVciRequest(String, VciRequest) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
This method is used to parse VCI message loaded from file either during initialization or for testing (when CM is running as GUI).
parseVciRequest(String, VciRequest) - Method in class ca.nrc.widar.vciMapper.VciMessageHandler
 
parseVdif(Vdif, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
Parse element vdif
PasswordDialog - Class in edu.nrao.widar.gui.widget
A small dialog box for password entry.
PasswordDialog(String, String) - Constructor for class edu.nrao.widar.gui.widget.PasswordDialog
Create a password dialog box with specified message and value to compare entered guess to.
pduType - Variable in class edu.nrao.widar.util.SnmpUtil.SnmpMessage
 
peakValue - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
performMapping() - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
20-06-2011 SV Search configuration queue to find messages ready to be be "mapped".
PING_INTERVAL - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
PINK - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
PINK - Static variable in class edu.nrao.widar.gui.widget.Led
 
PINK - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
PINK - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
PINK - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
PixelGrid - Class in edu.nrao.widar.gui.widget
A WIDAR GUI component that is a grid of pixels of a specified size that can be used ....
PixelGrid(int, int) - Constructor for class edu.nrao.widar.gui.widget.PixelGrid
Creates a rectangular PixelGrid of specified width and height.
PixelGrid2 - Class in edu.nrao.widar.gui.widget
A WIDAR GUI component that is a grid of pixels of a specified size that can be used ....
PixelGrid2(int, int, Color) - Constructor for class edu.nrao.widar.gui.widget.PixelGrid2
Creates a rectangular PixelGrid of specified width and height.
PLAIN_MESSAGE - Static variable in class edu.nrao.widar.gui.widget.Util
 
play() - Method in class edu.nrao.widar.gui.widget.Sound
 
playAudioFile(String) - Static method in class edu.nrao.widar.gui.widget.Sound
 
PolarizationProduct - Class in ca.nrc.widar.vciMapper
This object is created based on the VciRequest element PolProducts
PolarizationProduct() - Constructor for class ca.nrc.widar.vciMapper.PolarizationProduct
 
PolarizationProduct(int, CorrelationType, int) - Constructor for class ca.nrc.widar.vciMapper.PolarizationProduct
 
pollTable() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Polls a table from the head of the queue, removing it from the queue
PolProductGroup - Class in ca.nrc.widar.vciMapper
This class is created based on the VciRequest element PolProducts It contains configuration attributes for a group of polarization products.
PolProductGroup() - Constructor for class ca.nrc.widar.vciMapper.PolProductGroup
Default constructor should be never used.
PolProductGroup(String, boolean, int, int, int, int) - Constructor for class ca.nrc.widar.vciMapper.PolProductGroup
 
populate(CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
popupErrorMessage(String) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type ERROR_MESSAGE with a default title and icon.
popupErrorMessage(String, String) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type ERROR_MESSAGE with a title containing a specified source (where the error occured) and a default icon.
popupErrorMessage(String, Exception) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type ERROR_MESSAGE with a default title and icon and with several lines of the stack trace of a specified Exception appended to the message.
popupErrorMessage(String, String, Exception) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type ERROR_MESSAGE with a specified source appearing in the title, a default icon and with several lines of the stack trace of a specified Exception appended to the message.
popupErrorMsgNoOptions(LogRecord) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Opens a window with a scroll pane and displays the content of the LogRecord Click OK to proceede.
popupErrorOption(String, String, String[]) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane Option Dialog with a specified source, message and array of option Strings of type ERROR_MESSAGE.
popupInfoMessage(String) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type INFORMATION_MESSAGE with a default title and icon.
popupInfoOption(String, String, String[]) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane Option Dialog with a specified source, message and array of option Strings of type INFORMATION_MESSAGE.
popupMessage(String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of a specified message type where the title and icon are determined by the message type.
popupMessage(String, String, int) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane with a specified title, and message type where the icon is determined by the message type.
popupMessage(String, String, int, Icon) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of with a specified title, message type and icon.
popupMessageOption(String, String, String[]) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane Option Dialog with a specified source, message and array of option Strings of type PLAIN_MESSAGE.
popupOption(String, String, int, String[]) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane Option Dialog with a specified source, message, message type and array of option Strings.
popupPlainMessage(String) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type PLAIN_MESSAGE with a default title and icon.
popupQuestionMessage(String) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type QUESTION_MESSAGE with a default title and icon.
popupQuestionOption(String, String, String[]) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane Option Dialog with a specified source, message and array of option Strings of type QUESTION_MESSAGE.
popupThreeOptions(LogRecord) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Opens a window with a scroll pane which displayes the message and allowes the user to select whether to proceede or to quit the application.
popupWarningMessage(String) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type WARNING_MESSAGE with a default title and icon.
popupWarningMessage(String, String) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane of type WARNING_MESSAGE with a title containing a specified source (where the warning occured) and a default icon.
popupWarningOption(String, String, String[]) - Static method in class edu.nrao.widar.gui.widget.Util
Popup a JOptionPane Option Dialog with a specified source, message and array of option Strings of type WARNING_MESSAGE.
POST_REQ_PWR_THRES - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
POST_REQ_PWR_THRES - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
POWER - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
PRE_REQ_PWR_OFF_THRES - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
PRE_REQ_PWR_OFF_THRES - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
PRE_REQ_PWR_ON_THRES - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
PRE_REQ_PWR_ON_THRES - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
prefix() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Return the Rack ID prefix for this RackType
prefix - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 
prepareRenderer(TableCellRenderer, int, int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
 
printActQueue(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
printAllStations(boolean) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBasebands() - Method in class ca.nrc.widar.vciMapper.Station
 
printBaselinesAndProducts() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printBaselinesAndProducts() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
printBaselinesAndProducts() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBlbDataStreams() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBlbInputE2e(BaselineBoard) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBlbInputE2eForAll() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBlbInputWafer(XBarBoardOutputWafer) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBlbInputWafers(boolean) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBlbUse() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
printBlbUse(StringBuilder) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
printBlbUse() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
printBoardAddresses() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printBoardAddresses() - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
printBoardPositionAndMlid() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printBoardPositionAndMlid() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
printChangedComponents() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printChangedWafer() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
printChangedWafers() - Method in class ca.nrc.widar.vciMapper.StationRack
 
printChangeIndicators(StringBuilder) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printChangeIndicators(StringBuilder) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printChangeIndicators(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printCmibStatus() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
printCmibStatus() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
printConfigQueue(boolean) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Print content of the Configuration Queue into log window.
printConfigQueue(boolean) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Print content of the Configuration Queue to log window.
printCorrModel(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
Print content of the CorrModel.
printCorrModelShort(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printDataStreams() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printHashContents() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
A debug method allowing the contents of the various queue hashes to show their contents by printing to the console when the method is invoked.
printIds() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printIdsAndBlocks() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printIdsAndUseStatus() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printIDsAndxSwitchSetup() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
printInputWafer(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printInputWafers(boolean) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printInputWafers() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printInputWafers() - Method in class ca.nrc.widar.vciMapper.StationRack
 
printInputWafersAndOutputStreams() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printLagChain() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
printListOfActTriggers() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printListOfBlbsWithStatus() - Method in class ca.nrc.widar.vciMapper.Subarray
Print list of Baseline Boards used for this Subarray
printListOfStations() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printListOfStationsLong() - Method in class ca.nrc.widar.vciMapper.Subarray
 
printListOfStationsShort() - Method in class ca.nrc.widar.vciMapper.Subarray
 
printListOfStationsShorter() - Method in class ca.nrc.widar.vciMapper.Subarray
 
printListOfSubarrays() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printListOfSubarraysLong() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printListOfSubarraysShort() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printListOfVciMessages(List<Object>) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
printOpStatus(boolean) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
printOpStatus(boolean) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
printOutput() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printOutputIds(int) - Method in class ca.nrc.widar.vciMapper.StationRack
 
printOutputWafers() - Method in class ca.nrc.widar.vciMapper.StationRack
 
printProductGroup() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
printProducts() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
printProducts(StringBuilder) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
printProducts() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
printQuads() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printRCstatus() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printRevokeInfo() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printShort(boolean) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
printShort(boolean) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
printShort(boolean) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
printSourceShort() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
printStatusAndIds() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
printStatusAndRcs() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printStatusAndRcs2() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printStbs() - Method in class ca.nrc.widar.vciMapper.Station
 
printSubband() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
printSubbands() - Method in class ca.nrc.widar.vciMapper.Station
 
printSwitchSetup() - Method in class ca.nrc.widar.vciMapper.StationRack
 
printUsedComponents() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
printUsedFilters() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
printUsedInpWafersAndRCs() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printUsedWafers() - Method in class ca.nrc.widar.vciMapper.StationRack
 
printWafers() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
printXInput(char) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
printXInputToBlb() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
printXSwitchOutput() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
probCauseSwError - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
processHeader - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
processModel - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
processRecircCrc(CsdModeType, Integer, Integer, boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Executes a Recirculator Chip state request query, and processes the results into a Vector of CsdCrcErrorReport XML objects based on the data retrieved from the board.
processRequest(String, InetSocketAddress) - Method in class ca.nrc.widar.mccc.crm.CrmHttpDbHandler
Accepts the request from the Handler, and processes it for this context, returning the appropriate information to be send back to the caller via HTTP protocol
processRequest(String, InetSocketAddress) - Method in class ca.nrc.widar.mccc.crm.CrmHttpDiagnosticHandler
Accepts the request from the Handler, and processes it for this context, returning the appropriate information to be send back to the caller via HTTP protocol
processRequest(String, InetSocketAddress) - Method in class ca.nrc.widar.mccc.crm.CrmHttpHandler
A method which provides a response to an HTTP request based on the contents of the request.
processRequest(String, InetSocketAddress) - Method in class ca.nrc.widar.mccc.crm.CrmHttpModelHandler
Accepts the request from the Handler, and processes it for this context, returning the appropriate information to be send back to the caller via HTTP protocol
processRequest(String, InetSocketAddress) - Method in class ca.nrc.widar.mccc.crm.CrmHttpStateHandler
Accepts the request from the Handler, and processes it for this context, returning the appropriate information to be send back to the caller via HTTP protocol
processRequest(String, InetSocketAddress) - Method in class ca.nrc.widar.mccc.crm.CrmHttpTestHandler
Method which processes the supplied request to this TEST context, and supplies the resultant String to the specified client
processTable - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
ProductLagChain - Class in ca.nrc.widar.vciMapper
 
ProductLagChain() - Constructor for class ca.nrc.widar.vciMapper.ProductLagChain
 
ProductLagChain(int, boolean) - Constructor for class ca.nrc.widar.vciMapper.ProductLagChain
 
productSegmentForOneSum(int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
productSegmentForTwoSums(int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
PropertiesHandler - Class in edu.nrao.widar.util
General purpose static convenience methods for working with properties.
PropertiesHandler() - Constructor for class edu.nrao.widar.util.PropertiesHandler
 
publish(LogRecord) - Method in class edu.nrao.widar.util.EmailLogHandler
 
PULSE - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
PULSE - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
putSelectedFile(String) - Method in class edu.nrao.widar.gui.widget.RemoteFile
Displays a dialog box to allow selection of an existing file or creation of a new name on the remote server and writes the specified contents to that file.
putSelectedFile(String, boolean) - Method in class edu.nrao.widar.gui.widget.RemoteFile
Displays a dialog box to allow selection of an existing file or creation of a new name on the remote server and writes the specified contents to that file.
putSelectedFile(String) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Displays a dialog box to allow selection of an existing file or creation of a new name on the remote server and writes the specified contents to that file.

Q

qAtts - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
qBg - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
qCrit - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
qFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
qJoin - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
qResult - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
QSTATE - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
quadratureData - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
QUADS_PER_CORR_CHIP - Static variable in class ca.nrc.widar.vciMapper.CorrChip
There are 4 Correlator Cell Quads
query(String) - Static method in class edu.nrao.widar.util.HttpClientLink
Query the server (blocking) and return its response using a specified url.
query(String, int) - Static method in class edu.nrao.widar.util.HttpClientLink
Query the server (blocking) and return its response using a specified url and read timeout.
query(String, String) - Static method in class edu.nrao.widar.util.HttpClientLink
Query the server (blocking) and return its response using a specified url and query text.
query(String, String, int) - Static method in class edu.nrao.widar.util.HttpClientLink
Query the server (blocking) and return its response using a specified url, query text and read timeout.
queryCounter - Variable in class ca.nrc.widar.vciMapper.Board
Query retransmission counter
queryDelayCounter - Variable in class ca.nrc.widar.vciMapper.Board
Query retransmission delay counter
queryForCm(String, String, int) - Static method in class edu.nrao.widar.util.HttpClientLink
Query the server (blocking) and return its response using a specified url, query text and read timeout.
queryRefresh(String) - Method in class edu.nrao.widar.gui.widget.McbRegisterPanel
Query the server and refresh our 'read' field.
queryRefresh(String) - Method in class edu.nrao.widar.gui.widget.SingleMcbRegisterPanel
Query the server and refresh our 'read' field.
queryServer(String, DataReadyListener, boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
A convenience method allowing the user to query the server without specifying a timeout, using the default timeout defined in CrmBoard instead.
queryServer(String, DataReadyListener, int, boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends the supplied query string (message) to the server associated with this CrmBoard object.
queryServer(String) - Method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified query text.
queryServer(String, int) - Method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified query text and read timeout.
queryServer(String, String) - Method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified URL and query text.
queryServer(String, String, int) - Method in class edu.nrao.widar.util.HttpLink
Query the server (blocking) and return its response using a specified URL, query text and read timeout.
queryServer(String, String, HttpLinkCallback, int) - Method in class edu.nrao.widar.util.HttpLink
Deprecated. use the static method instead.
queryString - Variable in class edu.nrao.widar.util.HttpLinkCallback
POST operation (sent in HTTP request body) query text.
QUESTION_MESSAGE - Static variable in class edu.nrao.widar.gui.widget.Util
 
queueBg - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
quit() - Static method in class edu.nrao.widar.gui.widget.Sound
 

R

Rack - Class in ca.nrc.widar.vciMapper
Class Rack represents a physical entity where crates and slots are inserted.
Rack() - Constructor for class ca.nrc.widar.vciMapper.Rack
Default constructor should be never used.
Rack(int, Board.Type) - Constructor for class ca.nrc.widar.vciMapper.Rack
Rack type specifies which types of boards the rack contains, Board.Type.StationBoard or Board.Type.BaselineBoard.
Rack(int, String, Board.Type) - Constructor for class ca.nrc.widar.vciMapper.Rack
 
rack - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
rackID - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
rackID - Variable in class ca.nrc.widar.mccc.crm.CrmRack
 
rackString - Variable in class ca.nrc.widar.mccc.crm.CrmRack
 
raiseAlert - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
raiseXAlertBoardConfigFailure(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
2011-11-16 SV Generate xAlert - board configuration failure
raiseXAlertCbeConfigFailure(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
2011-10-13 SV
raiseXAlertSwError(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
2011-10-13 SV
raiseXAlertVciConfigFailure(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
2011-10-13 SV
rawArea - Variable in class edu.nrao.widar.gui.widget.RawRegistersPanel
The JTextArea that RawRegistersPanel will automatically use to display the registers in raw addr-value pairs.
RawRegistersPanel - Class in edu.nrao.widar.gui.widget
A Base Class for Device Register screens.
RawRegistersPanel(DeviceIdentifier) - Constructor for class edu.nrao.widar.gui.widget.RawRegistersPanel
Creates a new RawRegistersPanel for a specified device with a default register width of 32-bits.
RawRegistersPanel(DeviceIdentifier, int) - Constructor for class edu.nrao.widar.gui.widget.RawRegistersPanel
Creates a new RawRegistersPanel for a specified device, and register size (in bits).
RawRegistersPanel(DeviceIdentifier, String) - Constructor for class edu.nrao.widar.gui.widget.RawRegistersPanel
Creates a new RawRegistersPanel for a specified device, a default register size of 32-bits and an overriding screen refresh query String.
RawRegistersPanel(DeviceIdentifier, int, String) - Constructor for class edu.nrao.widar.gui.widget.RawRegistersPanel
Creates a new RawRegistersPanel for a specified device, register size (in bits) and a overriding screen refresh query String.
rcXCfgInProgressFor(int, String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
rcYCfgInProgressFor(int, String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
read(String) - Static method in class edu.nrao.widar.gui.widget.FileChooser
Reads a String from a specified file.
read(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Convenience method to return the contents of a file on the remote server.
READ_TIMEOUT - Static variable in class edu.nrao.widar.util.HttpClientLink
Default read time-out pertiod in milliseconds.
READ_TIMEOUT - Static variable in class edu.nrao.widar.util.HttpLink
Default read time-out pertiod in milliseconds.
ReadField - Class in edu.nrao.widar.gui.widget
A read-only JTextField with certain presets to give it a default 'look and feel' for the WIDAR GUIs.
ReadField() - Constructor for class edu.nrao.widar.gui.widget.ReadField
Creates a new blank ReadField with CENTER alignment.
ReadField(int) - Constructor for class edu.nrao.widar.gui.widget.ReadField
Creates a new blank ReadField with specified text alignment
ReadField(String) - Constructor for class edu.nrao.widar.gui.widget.ReadField
Creates a new ReadField containing text and set to CENTER alignment
ReadField(String, int) - Constructor for class edu.nrao.widar.gui.widget.ReadField
Creates a new ReadField with specified alignment and text
readFile(String) - Method in class edu.nrao.widar.gui.widget.RemoteFile
Returns the contents of the specified file on the remote server.
readFile(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Returns the contents of the specified file on the specified remote server.
readFile(String) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Returns the contents of the specified file on the remote server.
readFile(String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Returns the contents of the specified file on the specified remote server.
readTimeout - Variable in class edu.nrao.widar.util.HttpLinkCallback
Milliseconds until the READ (from server) portion of the comunication times-out.
readUrl(URL) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Reads the output of the supplied URL and returns in String form.
readXmlSourceDirectory() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
RecBlockSize - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
recContAdminStatusAsString(BaselineBoard.Side, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
recContAdminStatusAsString(int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
receiving - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 
recEnabled() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
RecFactor - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
recircBlk - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
recPayloadIsData(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
recPort - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
 
RED - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
RED - Static variable in class edu.nrao.widar.gui.widget.Led
 
RED - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
RED - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
RED - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
redFg - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
refresh() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Calls for a refresh of the table contents from the database
refresh(Element) - Method in class edu.nrao.widar.gui.widget.AboutPanel
Refresh from an org.w3c.dom.Element.
refresh() - Method in class edu.nrao.widar.gui.widget.LedSized
 
refresh() - Method in class edu.nrao.widar.gui.widget.LogPane
Refresh.
refresh(String) - Method in class edu.nrao.widar.gui.widget.McbRegisterPanel
Refresh read field from an XML String.
refresh(Element) - Method in class edu.nrao.widar.gui.widget.McbRegisterPanel
Refresh 'read' field from an org.w3c.dom.Element.
refresh(Element) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Refresh from an org.w3c.dom.Element.
refresh() - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Query the server and refresh this screen with the returned response.
refresh(String) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Refresh this screen with specified XML.
refresh(Element) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Refresh from an org.w3c.dom.Element.
refresh(String) - Method in class edu.nrao.widar.gui.widget.SingleMcbRegisterPanel
Refresh read field from an XML String.
refresh(Element) - Method in class edu.nrao.widar.gui.widget.SingleMcbRegisterPanel
Refresh 'read' field from an org.w3c.dom.Element.
refresh() - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
Refresh 'read' field by querying the server.
refresh(String, boolean) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
Refresh read field from a String of xml.
refresh(Element) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
Refresh 'read' field from an org.w3c.dom.Element.
refresh(Document) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
Deprecated. Use refresh(String xml) instead. We need to get away from processing XML and let XmlUtil handle it as much as possible.
refreshModel(int) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Refreshes the model by re-querying the physical components for the specified station ID.
refreshModel() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Refreshes the model by re-querying all physical components within the model
RefreshPanel - Class in edu.nrao.widar.gui.widget
A Sub-Panel to setup a screen's refresh rate and to cause a screen to execute a refresh either automatically or manually.
RefreshPanel() - Constructor for class edu.nrao.widar.gui.widget.RefreshPanel
Creates a new RefreshPanel of the default interval.
RefreshPanel(int) - Constructor for class edu.nrao.widar.gui.widget.RefreshPanel
Creates a RefreshPanel with a specified refresh period.
RefreshPanel(ActionListener) - Constructor for class edu.nrao.widar.gui.widget.RefreshPanel
Creates a RefreshPanel with a specified ActionListener
RefreshPanel(int, ActionListener) - Constructor for class edu.nrao.widar.gui.widget.RefreshPanel
Creates a RefreshPanel with a specified refresh period and ActionListener
refreshQuadrantStatus() - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
For each associated BlB pair within the quadrant, this method clears any currently stored RXP Inputs configuration information, retrieves the current RxpInputs XML from the BlB pairs, and populates the qSb array with the values unmarshalled from the RxpInputs XML.
refreshSpecialElement(Element) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Process non-standard XML elements.
refreshStationStatus() - Method in class ca.nrc.widar.mccc.crm.CrmStation
For each associated StB within the station, this method clears any currently stored output switch configuration information, retrieves the current Outputs XML from the StB, and populates the stO array with the values unmarshalled from the Outputs XML.
registerBlfFile(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Adds a new BLF file name to the blfFile processing queue
registerBlfFile(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
This method is called when a BLF file has completed processing intended to signal the Diagnostic that a file is to be added to the cleanup queue
registerDiagnostic(CrmDiagnostic) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Registers a new diagnostic with the CrmLagFrameReceiver
registerHmReceiverData(CsdModeType, int, Recirculator) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
RegisterSetBrowserGui - Class in edu.nrao.widar.gui.widget
A general purpose device register set browser GUI that allows viewing and modifying the values of a device's registers.
RegisterSetBrowserGui(String) - Constructor for class edu.nrao.widar.gui.widget.RegisterSetBrowserGui
Creates a RegisterSetBrowserGui for a specified server name/IP address, device name and id.
RegisterSetBrowserGui(String, String, String) - Constructor for class edu.nrao.widar.gui.widget.RegisterSetBrowserGui
Creates a RegisterSetBrowserGui for a specified server name/IP address, device name and id.
RegisterSetBrowserPanel - Class in edu.nrao.widar.gui.widget
The panel that implements the general purpose device register set browser GUI RegisterSetBrowserGui.
RegisterSetBrowserPanel(String) - Constructor for class edu.nrao.widar.gui.widget.RegisterSetBrowserPanel
Creates a RegisterSetBrowserPanel for a specified server at name/IP address.
RegisterSetBrowserPanel(String, String, String) - Constructor for class edu.nrao.widar.gui.widget.RegisterSetBrowserPanel
Creates a RegisterSetBrowserPanel for a specified server name/IP address, device name and id.
registerTcs(int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Sets the boolean flag corresponding to the supplied TimeCodeSource index to true, if the TCS index is valid.
rejectedMessage - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
RELEASE_FILENAME - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
releaseAllResources(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
This method is used when deleting station, it releases all the resources that belong to this station.
releaseResources(String) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Release resources used for the specified subarray.
releaseResources(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
Called when deleting subarray.
releaseResources() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
releaseResources(String) - Method in class ca.nrc.widar.vciMapper.SummedArray
Release resources used for a specified subarray.
releaseString - Static variable in class ca.nrc.widar.mccc.crm.Crm
 
releaseString - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
releaseSubarray(String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Release resources used for the specified subarray
reload(String) - Static method in class edu.nrao.widar.util.SystemProperties
Reloads properties from a specified file.
RemoteFile - Class in edu.nrao.widar.gui.widget
A file chooser dialog that operates on server side files.
RemoteFile(String, String, String) - Constructor for class edu.nrao.widar.gui.widget.RemoteFile
Creates a RemoteFile to a specified IP Address at a specified starting directory.
RemoteFileChooser - Class in edu.nrao.widar.gui.widget
A file chooser dialog that operates on server side files.
RemoteFileChooser(String) - Constructor for class edu.nrao.widar.gui.widget.RemoteFileChooser
Creates a RemoteFileChooser to a specified IP Address.
RemoteFileChooser(String, String) - Constructor for class edu.nrao.widar.gui.widget.RemoteFileChooser
Creates a RemoteFileChooser to a specified IP Address at a specified starting directory.
remoteFileChooserDefaultDirectory - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
The default directory for the RemoteFileChooser.
RemoteFileEditor - Class in edu.nrao.widar.gui.widget
A simple file editor that operates on remote (server-side) files.
RemoteFileEditor(String) - Constructor for class edu.nrao.widar.gui.widget.RemoteFileEditor
Creates a new RemoteFileEditor for specified server IP address.
RemoteFileEditor(String, String) - Constructor for class edu.nrao.widar.gui.widget.RemoteFileEditor
Creates a new RemoteFileEditor for specified server IP address.
RemoteFileHandler - Class in edu.nrao.widar.util
Remote (server-side) file handler.
RemoteFileHandler() - Constructor for class edu.nrao.widar.util.RemoteFileHandler
 
RemoteFileServlet - Class in edu.nrao.widar.util
 
RemoteFileServlet() - Constructor for class edu.nrao.widar.util.RemoteFileServlet
 
remoteServerName - Variable in class edu.nrao.widar.gui.widget.MainFpgaFrame
The name or IP address of the server to which we connect.
remove(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Removes all references to the specified diagnostic from the various storage containers within the CrmDiagnosticQueue.
remove(List<Object>) - Method in class ca.nrc.widar.vciMapper.ConfigFromCbeQueue
Configuration queue is a list of lists.
remove(int) - Method in class ca.nrc.widar.vciMapper.ConfigFromCbeQueue
 
remove(List<Object>) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Configuration queue is a list of lists.
remove(int) - Method in class ca.nrc.widar.vciMapper.ControlQueue
 
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.Crm
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmDb
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Removes an ActionListener from the ListenerList for this class
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTable
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Removes a listener from the action listener list within this class.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.ActionGroup
Remove an ActionListener.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Remove an ActionListener.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.Clock
Remove an ActionListener.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Remove an ActionListener.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
Remove an ActionListener.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Removes an ActionListener to this ActionListener.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Removes an ActionListener to this ActionListener.
removeActionListener(ActionListener) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Remove an ActionListener.
removeAll(List<CmMonitorControl>) - Method in class ca.nrc.widar.vciMapper.ControlQueue
 
removeAllDiagnostics() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Removes all diagnostics from the table
removeAllDiagnostics() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
removeAllDiagnosticsOnClose() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Calls a CrmGuiDiagTableModel method which is run just prior to the CrmGui exiting.
removeArrow() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
Removes the arrow indicator from the header cell
removeBaselineBoard(int) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Removes the association to the supplied StB from this Station
removeBB(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
Remove Baseband and set the corresponding Station Board Data Path as "unassigned".
removeBoard(CrmCommon.Crate, Integer) - Method in class ca.nrc.widar.mccc.crm.CrmRack
Removes or resets the reference to a particular board in the specified slot.
removeBoard(int) - Method in class ca.nrc.widar.vciMapper.Crate
 
removeBoard(Board) - Method in class ca.nrc.widar.vciMapper.Rack
 
removeCrate(int) - Method in class ca.nrc.widar.vciMapper.Rack
 
removeCrmIssue(Integer) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Removes the CrmIssue with the ID specified if it is in the table
removeCrmIssueAt(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Removes the CrmIssue at the specified row number in the table
removeDiagnostic(CrmDiagnostic) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Unregister a diagnostic (board sn) from the lag frame receiver.
removeDiagnostic(String) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
On receipt of a remove command from the CRM, this method calls all removeDIagnostic methods in the sub-tabs with the supplied id value in order to remove the diagnostic from the GUI
removeDiagnostic(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Removes the diagnostic with the ID specified if it is in the table
removeDiagnostic(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Calls a CrmGuiDiagTableModel method which removes a Diagnostic XML object from the current tab active processes table
removeDiagnosticAt(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Removes the diagnostic at the specified row number in the table
removeFromActQueue(long) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
20-06-2011 SV Activation Queue is a list of CorrModels.
removeFromConfigQueue(String) - Method in class ca.nrc.widar.vciMapper.ConfigurationQueue
Configuration queue is a list of lists.
removeFromConfigQueue(String) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
Configuration queue is a list of lists.
removeFromSubarray(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
Set observation parameters to default values.
removeFromSubarray() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
removeGuiHost(String) - Static method in class ca.nrc.widar.mccc.crm.Crm
Removes a hostname from the GUI hostname list
removeHtmlTags(String) - Static method in class ca.nrc.widar.mccc.crm.CrmCommon
A method that both replaces
HTML tags with newline characters, and removes any other HTML tags from the text in order for it to be clear and readable in a non-HTML supportive display environment.
removeHttpLinkCallbackListener(HttpLinkCallbackListener) - Method in class edu.nrao.widar.util.HttpLink
Deprecated. new static queryServer method takes a listener as a parameter. This should never have been this way since we do not want everyone called back for a single caller's comm (not that it would actually happen since it is unlikely that more than one listener would be using the same HttpLink instance.
removeNotify() - Method in class edu.nrao.widar.gui.widget.LogPane
 
removeSnLock(String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Removes the lock on the component that is associated with the supplied diagnostic ID
removeStation(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
removeStation(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
removeStationBoard(String) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Removes the association to the supplied StB from this Station
removeTrapListener(SnmpTrapManager.SnmpTrapListener) - Method in class edu.nrao.widar.util.SnmpTrapManager
 
rePeakValue - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
replicate23 - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
replicate23() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
replicate45 - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
replicate45() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
replicateOff - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
RC switch replicate - corresponds to rep23 and rep45 RC RFS pg.48 For replicate=2_3 RC replicates (copies) rec.
reportBlbStatusInHtmlFormat(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
reportConfigChangeStatus(BaselineBoardStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
reportConfigChangeStatus(StringBuilder, BaselineBoardStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
reportConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
reportConfigChangeStatus(StationBoardStatus) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
reportConfigChangeStatus(StringBuilder, StationBoardStatus) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
reportConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.StationRack
 
reportConfigChangeStatus() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
reportConfigChangeStatusHtml(StringBuilder, BaselineBoardStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
reportConfigChangeStatusHtml(StringBuilder, StationBoardStatus) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
reportConfigChangeStatusHtmlFormat(StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationRack
 
reportConfigChangeStatusHtmlFormat(StringBuilder) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
reportConfigChangeStatusHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationRack
 
reportConfigChangeStatusHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
reportMessage(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
reportNextCommFailure - Variable in class ca.nrc.widar.vciMapper.Board
Used to throttle report of communication failure
reportNextCommFailure() - Method in class ca.nrc.widar.vciMapper.Board
 
reportNextCommFailure - Variable in class ca.nrc.widar.vciMapper.BoardStatus
Used to throttle report of communication failure
reportNextCommFailure() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
reportNextCommFailure - Variable in class ca.nrc.widar.vciMapper.StationRack
Used to throttle report of communication failure
reportNextCommFailure - Variable in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
Used to throttle report of communication failure
reportStbStatusInHtmlFormat(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
reportXbbStatusInHtmlFormat(StringBuilder) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
requestId - Variable in class edu.nrao.widar.util.SnmpUtil.SnmpMessage
 
reset() - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Calls methods to zero out all values and counters
reset() - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
Reset to a no-value state and return the numerical value of the address field.
resetDiagConcurrentChanged() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Used in conjunction with isDiagConcurrentChanged, to reset the change indicator once it has been reported.
resetFramePointer() - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Resets the file pointer to the start of the file
resetParams(int, int, ObjectFactory) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
The reset signal from the diagnostic sets new values for stage and subband along with resetting all storage arrays for a new round of data collection in a new configuration
resetQueryCounter() - Method in class ca.nrc.widar.vciMapper.Board
 
resetRetCounter() - Method in class ca.nrc.widar.vciMapper.Board
 
respond(HttpExchange, int, String) - Static method in class edu.nrao.widar.util.HttpServerLink
Send Response String.
respond(HttpExchange, int, InputStream) - Static method in class edu.nrao.widar.util.HttpServerLink
Send Response Stream.
respond(HttpExchange, int, File) - Static method in class edu.nrao.widar.util.HttpServerLink
Send Response File.
responseNotComponent - Static variable in class ca.nrc.widar.vciMapper.BoardStatus
 
responseString - Variable in class edu.nrao.widar.util.HttpLinkCallback
Server's response if successful communication or HttpLink's error message if not.
restart() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
attempts to deactivate and restart the stream
restart() - Method in class ca.nrc.widar.mccc.crm.VariableLed
A method used to restart the VariableLED in the case that a vital parameter has been changed.
restart() - Method in class edu.nrao.widar.gui.widget.VariableLed
A method used to restart the VariableLED in the case that a vital parameter has been changed.
RESTART_DB - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
retCounter - Variable in class ca.nrc.widar.vciMapper.Board
 
retCounter - Variable in class ca.nrc.widar.vciMapper.StationRack
Counts how many times CM attempted to transmit the configuration message.
retDelayCounter - Variable in class ca.nrc.widar.vciMapper.Board
 
retDelayCounter - Variable in class ca.nrc.widar.vciMapper.StationRack
Used to slow down retransmissions, so that temporary network problem does not get even wors due to too many re-transmissions.
revalidate() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
 
revokeCmibCfg(BaselineBoardStatus, long, long, XMLGregorianCalendar, StringBuilder) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Revoke transmitted configuration by removing it from the CMIB input queue.
revokeCmibCfg(StationBoardStatus, long, long, XMLGregorianCalendar, StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoard
This method updated on 2012-10-26 by Sonja.Vrcic@nrc.gc.ca: Check admin.
revokeConfiguration() - Method in class ca.nrc.widar.vciMapper.CorrModel
Revoke transmitted configuration: 1.
revokeTransmittedCfg() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
RFI_BLANKING_DURATION_DEFAULT - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
RFI_DETECTION_LEVEL_DEFAULT - Static variable in class ca.nrc.widar.vciMapper.StbFilter
 
rfiChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
rfiChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
RIGHT - Static variable in class edu.nrao.widar.gui.widget.Switch
 
rmsValue - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
RotatableTextPanel - Class in edu.nrao.widar.gui.widget
A Rotatable Text Panel.
RotatableTextPanel(String, double) - Constructor for class edu.nrao.widar.gui.widget.RotatableTextPanel
Creates a rotatable text panel for the specified text to be rotated at the specified angle.
ROW_SELECTOR - Static variable in class edu.nrao.widar.gui.widget.MultiChooser.ChooserButton
 
rowColumnSevenIdleAndAvailable() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Baseline Board is idle if all Recirculation Controllers are idle.
run() - Method in class ca.nrc.widar.mccc.crm.CrmDb
The execution loop of the CrmDb object.
run() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
The run method required for the Runnable interface
run() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
The run method of the CrmDiagnosticQueue class.
run() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
The run method of the CrmLagFrameReceiver class
run() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
The thread execution loop
run() - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
run() - Method in class ca.nrc.widar.vciMapper.ThreadCrmListener
 
run() - Method in class edu.nrao.widar.gui.widget.Sound.AudioPlayerThread
 
run() - Method in class edu.nrao.widar.util.HttpAsyncLink
 
run() - Method in class edu.nrao.widar.util.HttpClientLink.HttpAsyncClientLink
 
runningAsDeamon - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
On MCCC VciConfigMapper is runing as deamon.
rxpAndRcInputConfigured(String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Find if at least one RC is used for the specified subarray (configId).
rxpInputsFile - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 

S

safeMode - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
SafetySwitch - Class in edu.nrao.widar.gui.widget
A safety switch GUI component.
SafetySwitch() - Constructor for class edu.nrao.widar.gui.widget.SafetySwitch
Create a SafetySwitch in the CLOSED_OFF state
SafetySwitch(int) - Constructor for class edu.nrao.widar.gui.widget.SafetySwitch
Create a SafetySwitch with specified state.
SafetySwitch2 - Class in edu.nrao.widar.gui.widget
A lockable safety switch GUI component.
SafetySwitch2() - Constructor for class edu.nrao.widar.gui.widget.SafetySwitch2
Create a SafetySwitch2 in the enabled off state.
SafetySwitch2(boolean) - Constructor for class edu.nrao.widar.gui.widget.SafetySwitch2
Create a SafetySwitch2 with a specified on/off state and enabled.
SafetySwitch2(boolean, boolean) - Constructor for class edu.nrao.widar.gui.widget.SafetySwitch2
Create a SafetySwitch2 with specified selected and enabled states.
sameBaseband(int, PolarizationType, int, PolarizationType) - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
sameBaseband(int, PolarizationType) - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
sameBbid(int, int) - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
sameBbid(int) - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
sameProduct(Pp, int) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
sameSubarrayAs(BlbRecFpga) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
sameWaferToAllInputDataStreams(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Deprecated. Used for stationPacking=minPack
sameWaferToAllInternalDataStreams(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Input from the same wafer (i.e.
SampleRateAsInt - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
SampleRateAsString - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
 
Sandbox - Class in edu.nrao.widar.gui.widget
 
Sandbox() - Constructor for class edu.nrao.widar.gui.widget.Sandbox
 
Sandbox.FlashPath - Class in edu.nrao.widar.gui.widget
 
Sandbox.FlashPath(Point[]) - Constructor for class edu.nrao.widar.gui.widget.Sandbox.FlashPath
 
Sandbox2 - Class in edu.nrao.widar.gui.widget
 
Sandbox2() - Constructor for class edu.nrao.widar.gui.widget.Sandbox2
 
Sandbox2.FlashPath - Class in edu.nrao.widar.gui.widget
 
Sandbox2.FlashPath(Point[], Color) - Constructor for class edu.nrao.widar.gui.widget.Sandbox2.FlashPath
 
sansSherif10 - Static variable in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
saveLastErrorLog(LogRecord) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
saveXbbConfigName(boolean, String) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
sbFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
sbId - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
scrollDown - Variable in class edu.nrao.widar.gui.widget.LogPane
 
SECOND_BLB - Static variable in class ca.nrc.widar.vciMapper.SummedArray
 
secondaryStationToAllCcqs() - Method in class ca.nrc.widar.vciMapper.CorrChip
StationPacking=MinPack, one Station per row/column.
secondBlbLowerSumToCcArray(SummedArray, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is used to get a cross-product A*B or B*A for the summed array.
secondBlbSumFromLowerRxp(SummedArray, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Created to replace setSumsLowerRxpsForBlb1() Sum generated on the lower RXP is forwarded to RC7 dataStream 7 (as if was comming from wafer 3-B).
selectFrame - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
sendAnalyze(String, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
sendAnalyze(Vector<String>, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
sendCcRephase(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the REPHASE command to the Baseline Board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler for this board.
sendCfgToCbe(WidarCbe, String, Subarray.CbeConfigStatus, String, long, ArrayList<LogRecord>) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
sendCfgToXBarSwitchesAsOne(XMLGregorianCalendar, long, boolean, StringBuilder, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StationRack
This method checks all the XBarBoardOutputWafers in the rack and, if configuration has changed (true), configures the switch.
sendClearErrors() - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends a generic ClearErrors command to this Board
sendClearErrors(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends a generic ClearErrors command to this Board, and directs the response to the supplied DataReadyListener
sendClearErrors(int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Send a ClearErrors command to all Baseline Boards in this quadrant for a specified subband ID
sendClearErrors(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Send a ClearErrors command to all Baseline Boards in this quadrant.
sendConfig(CsdModeType, int, DataReadyListener, boolean, InetAddress) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Send StB output, and CrossBar input configuration information to the StBs that comprise this Station.
sendConfiguration(BaselineBoardStatus, long, long, XMLGregorianCalendar, boolean, boolean, StringBuilder) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Dec.
sendConfiguration(StationBoardStatus, long, long, XMLGregorianCalendar, boolean, boolean, StringBuilder) - Method in class ca.nrc.widar.vciMapper.StationBoard
Dec.
sendCrcSyncCheckRequest(int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements containing CRC error count information for an RXP chip on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendCrcSyncCheckRequest(String, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements containing CRC error count information for a RECIRCULATOR chip on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendCrcSyncCheckRequest(String, int, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements containing CRC error count information for ONE RXP and ONE RECIRCULATOR chip on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendCrcSyncCheckRequest(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements containing CRC error count information for ALL RXP and RECIRCULATOR chips on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendCrmErrorReportRequest() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
WJS, 10/2012, Static method use to request the CRM Error Report from the CRM DB server.
sendCrmState(State) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
sendDiagnostic(Diagnostic, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
A convenience method designed to deal with only one Diagnostic XML object being sent to the CRM.
sendDiagnostic(Vector<Diagnostic>, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Takes the supplied list of DIagnostic XML objects, describing diagnostics to be sent to the CRM, adds them to a CrmXml XML object and posts them via HTTP to the CRM.
sendGet(InetAddress, int, String, String, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crm.CrmComm
a sendGet convenience method, allowing the caller to not require specifying the timeout value and defaulting to the SERVER_DEFAULT_TIMEOUT
sendGet(InetAddress, int, String, String, DataReadyListener, int) - Static method in class ca.nrc.widar.mccc.crm.CrmComm
Sends the supplied message String as an asynchronous server 'GET' query to the specified server.
sendHalt(String, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
A convenience method which desls with a single 'halt' command to be sent to the CRM
sendHalt(Vector<String>, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Packages and sends the halt command to the CRM for the supplied list of diagnostic IDs
sendMonitorXml(XmlTraffic) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends an entry to the XmlTraffic Monitor in the CRM
sendMonitorXml(XmlTraffic, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Receives an XmlTraffic element from the sub-class Diagnostic, appends the 'direction' of the traffic to that object, and then registers the XmlTraffic object with the CRM XmlTraffic buffer.
sendPost(InetAddress, int, String, String, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crm.CrmComm
a sendPost convenience method, allowing the caller to not require specifying the timeout value and defaulting to the SERVER_DEFAULT_TIMEOUT
sendPost(InetAddress, int, String, String, DataReadyListener, int) - Static method in class ca.nrc.widar.mccc.crm.CrmComm
Sends the supplied message String as an asynchronous server 'POST' query to the specified server.
sendRecircStateRequest(String, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements INPUTSTREAMCONFIG, HMRECEIVER and SETUP XML for a RECIRCULATOR chip on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendRecircStateRequest(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements INPUTSTREAMCONFIG, HMRECEIVER and SETUP XML for ALL RECIRCULATOR chips on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendRecircStateRequest(String, int, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Sends a request for Recirculator chip state to all Baseline Board in this quadrant for a specified subband ID.
sendRecircStateRequest(int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Sends a request for Recirculator chip state to all Baseline Board in this quadrant for a specified subband ID.
sendRecircStateRequest(String, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Sends a request for Recirculator chip state to all Baseline Board in this quadrant.
sendRecircStateRequest(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Sends a request for Recirculator chip state to all Baseline Board in this quadrant.
sendRecircStatusRequest(String, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements STATUS and SETUP for a RECIRCULATOR chip on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendRecircStatusRequest(DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to request XML elements STATUS and SETUP for ALL RECIRCULATOR chips on this board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendRemove(String, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
A convenience method which desls with a single 'remove' command to be sent to the CRM
sendRemove(Vector<String>, DataReadyListener) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Packages and sends the remove command to the CRM for the supplied list of diagnostic IDs
sendReturnState() - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Sends XML to the Baseline Board which puts it into a neutral, useable state upon completion of the diagnostic.
sendRxpInputsRequest() - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Reads the RxpInputs 'proc' file from this baseline board, and returns the file as a String of XML in the form of an element (marshalled)
sendStationXml(HashMap<String, StationBoard>, DataReadyListener, boolean, InetAddress) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Convenience method to call sendStationXml with the supplied HashMap of StationBoard elements indexed by StB serial number
sendStationXml(String, StationBoard, DataReadyListener, boolean, InetAddress) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Send the supplied XML element to the specified station board defined within this station via asynchronous http server link, supplying the DataReadyListener so that the response can be properly directed.
sendStationXml(String, StationBoard, DataReadyListener, int, boolean, InetAddress) - Method in class ca.nrc.widar.mccc.crm.CrmStation
Send the supplied XML element to the specified station board defined within this station via asynchronous http server link, supplying the DataReadyListener so that the response can be properly directed.
sendTimeCodeSourceChange(String, int, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to change TimeCode Source for a specified recirculator chip to this Baseline Board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendTimeCodeSourceChange(int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sends the command to change TimeCode Source for ALL recirculator chips to this Baseline Board via an HttpClientLink asynchronous 'POST' query to the mah context HTTP handler.
sendTimeCodeSourceChange(String, int, int, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Sends a TimeCodeSource change command to all Baseline Board in this quadrant for a specified subband ID.
sendTimeCodeSourceChange(int, int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Sends a TimeCodeSource change command to all Baseline Board in this quadrant for a specified subband ID.
sendTimeCodeSourceChange(int, DataReadyListener) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Sends a TimeCodeSource change command to all Baseline Boards in this quadrant.
sendUrlQuery(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Supplied with an HTTP context, and a query string, this method returns a the result of the URL that has been sent to the Board.
sendVciResponse(VciResponse, boolean) - Method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
sendXmlToMah(String, DataReadyListener, boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends an XML string to a CMIB Module Access Handler (MAH).
sendXmlToMah(String, DataReadyListener, XmlTraffic, boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends an XML string to a CMIB Module Access Handler (MAH) The guiClient defaults to NULL.
sendXmlToMah(String, DataReadyListener, int, boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends an XML string to a CMIB Module Access Handler (MAH) The guiClient defaults to NULL.
sendXmlToMah(String, DataReadyListener, XmlTraffic, int, boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends an XML string to a CMIB Module Access Handler (MAH) The guiClient defaults to NULL.
sendXmlToMah(String, DataReadyListener, XmlTraffic, boolean, InetAddress) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends an XML string to a CMIB Module Access Handler (MAH) The timeout defaults to TIMEOUT.
sendXmlToMah(String, DataReadyListener, XmlTraffic, int, boolean, InetAddress) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Sends an XML string to a CMIB Module Access Handler (MAH)
SERVER_DEFAULT_TIMEOUT - Static variable in class ca.nrc.widar.mccc.crm.CrmComm
 
SERVER_DEFAULT_TIMEOUT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
SERVER_LED_INT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
ServerPanel - Class in edu.nrao.widar.gui.widget
A Sub-Panel to provide communication info of a system server such as the server's network address/name and screen refresh options.
ServerPanel(String) - Constructor for class edu.nrao.widar.gui.widget.ServerPanel
Creates a new ServerPanel with the default refresh interval.
ServerPanel(String, ActionListener) - Constructor for class edu.nrao.widar.gui.widget.ServerPanel
Creates a new ServerPanel with the default refresh interval.
ServerPanel(String, ActionListener, int) - Constructor for class edu.nrao.widar.gui.widget.ServerPanel
Creates a ServerPanel with a specified refresh period.
set(boolean, String, String) - Method in class edu.nrao.widar.gui.widget.LedElement
Set between two specified colors based on a specified boolean.
setAbId(ABType) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setAck(int, String) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Creates and sets the Query CrmDbAck child structure for this query based on the supplied values.
setAck(int, String, String) - Method in class ca.nrc.widar.mccc.crm.CrmQuery
Creates and sets the Query CrmDbAck child structure for this query based on the supplied values.
setActivated(boolean) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
Activate/deactivate the timer.
setActivated(boolean) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Activate/deactivate the timer.
setActivationId(String) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setActive(boolean) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Sets the active flag to the supplied value.
setActive(boolean, long) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setActTime(long) - Method in class ca.nrc.widar.vciMapper.CorrModel
Activation Time is passed as an argument when a new instance is created.
setActTimeAsString(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setAddress(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setAdminStatus(AdminStatus) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setAlarm(String, boolean) - Method in class edu.nrao.widar.gui.widget.ReadField
Determine and Set the field's alarm state.
setAlarmed(boolean) - Method in class edu.nrao.widar.gui.widget.ReadField
Display the field according to its alarm state.
setAlarmed(boolean) - Method in class edu.nrao.widar.gui.widget.WriteField
Display the field according to its alarm state.
setAllComponentsAdminEnabled() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
setAllComponentsAdminEnabled() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
setAndAlarm(String, String, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Get a ReadField by it name, set its text, set its alarm state and return an indication of the success of the operation.
setAntennaId(String) - Method in class ca.nrc.widar.vciMapper.Station
 
setAntennaType(AntennaType) - Method in class ca.nrc.widar.vciMapper.Station
 
setAsBbPair(int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
 
setAsBbSingle(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
 
setAsDefault() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
setAsPairMember(boolean, ABType, int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setAsPairMember(boolean, ABType) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setAssignedAndIdle(int, int, boolean) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setAutoCorrAlgorithm(AutoCorrAlgorithmType) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setAutoCorrDwellTime(int) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setAutoCorrMask(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setAutoCorrMode(String, PolarizationProduct, PolarizationProduct, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setAutoCorrMode(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setAutoCorrMode(BlbDataStream, PolarizationProduct) - Method in class ca.nrc.widar.vciMapper.CcCell
Auto-correlation Mode - not to be confused with regular auto-correlation products.
setAutoCorrMode(int, PolarizationProduct) - Method in class ca.nrc.widar.vciMapper.CorrChip
Set auto-correlator mode.
setAutoCorrOnly(boolean) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setAutoCorrOnly() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setAutoCorrOnly(boolean) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setAutoCorrStartFrom(StartFromType) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setBandWidth(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setBandWidthAndCentralFrequency(int, int) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setBbAssignedAndIdle(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbAssignedAndIdle(int) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbBandwidth(int, int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbBandwidth(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbId(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Sets the Baseband ID for the specified data channel to the provided value, or makes no change if the data channel ID is out of allowable range.
setBBID(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setBBID(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setBbIsUsed(int) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbName(int, int, String) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbName(int, String) - Method in class ca.nrc.widar.vciMapper.Station
 
setBBpair(int, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setBBpair(int, int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setBbPairUsed(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbSinglePhCenter(int, int, boolean) - Method in class ca.nrc.widar.vciMapper.Station
 
setBbSinglePhCenter(int, boolean) - Method in class ca.nrc.widar.vciMapper.Station
 
setBelongsToSubarray(String) - Method in class ca.nrc.widar.vciMapper.Station
 
setBlankingDuration(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setBlb0InputForStMinPackOneCrossRq4(String, List<Integer>, List<Integer>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
SV 2011-12-21 Configure the 1st Baseline Board for a pair that produces only cross-correlations, i.e.
setBlb0RcXInputForBlb1ForOnePerColumn(String, int, int, List<Integer>, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setBlb0RcYInputForBlb1ForOnePerColumn(String, int, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setBlbFirstForward(boolean) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setBlbHstAbsPeakDiffMax(double) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
Sets the blbHstAbsPeakDiffMax attribute in the Diagnostic XML
setBlbHstAbsPeakDiffMax(double) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
Sets the blbHstAbsPeakDiffMax attribute in the Diagnostic XML
setBlbHstAbsPeakDiffMax(double) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
setBlink(Long) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the VariableLed to BLINK mode with the specified interval (ms) and restart.
setBlink(Long, Color) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the VariableLed to BLINK mode with the specified interval (ms) and and a new colour.
setBlink(Long) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the VariableLed to BLINK mode with the specified interval (ms) and restart.
setBlink(Long, Color) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the VariableLed to BLINK mode with the specified interval (ms) and and a new colour.
setBlock(int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setBlockCfgForBlbs(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setBlockCfgForCbe(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setBlockCfgForCrm(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setBlockCfgForStbs(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setBlockCfgForXbbs(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setBlocks(int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
setBlocks(int, int, int, int) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setBlockXAlerts(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setBoardPosition(Integer, CrmCommon.Crate, Integer) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Set the board position (where the board is installed within the system) for this board, given the input parameters
setBounds(Rectangle) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
 
setBounds(int, int, int, int) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
 
setBounds(Rectangle) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
setBounds(int, int, int, int) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
 
setBurstModeControl(BlbLtaFpga.BurstModeControl) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
setBurstModeControl(CorrChip.BurstModeControl) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setBwAndCentralFrequency(int, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setCbeAlertActive(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
setCbeCfgTransmittedAt(long) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
Wait time is already set.
setCbeConfigStatus(Subarray.CbeConfigStatus) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setCbeConfigStatus(SubarrayCbeConfig) - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
setCbeConfigStatusCompleted() - Method in class ca.nrc.widar.vciMapper.Subarray
 
setCbeConfigStatusCompleted(int) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
setCbeConfigStatusObject(SubarrayCbeConfig) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setCbeConfigStatusRejected() - Method in class ca.nrc.widar.vciMapper.Subarray
 
setCbeConfigStatusRejected(int) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
setCbeConfigWaitingForCbeResponse() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
setCbeNodeAddresses(String, String) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
setCbeNodeAddresses(String, String) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setCbeNodeAddresses(String, String, String) - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
setCbeRejectedCfg(String) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setCbeRespReceivedAt(long) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
setCcDefault() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setCcErrorThreshold(double) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setCcErrorThreshold(double) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Sets the current Lag comparison threshold to the supplied value
setCcqInputPrimary() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setCfgInProgress(boolean) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setCfgNotInProgressFor(PolarizationProduct, int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setChoiceItemEnabled(int, boolean) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Enable/Disable a specified choice.
setChoiceItemText(int, String) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Sets the text of a specified choice.
setChoices(String[]) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Sets to a new set of choices.
setColor(Color) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the active colour for the VariableLed and restart.
setColor(Color) - Method in class edu.nrao.widar.gui.widget.FanTachometer
 
setColor(Color) - Method in class edu.nrao.widar.gui.widget.Led
Set the color of the Led.
setColor(String) - Method in class edu.nrao.widar.gui.widget.Led
Set the color of the Led to that specified by a String.
setColor(Color) - Method in class edu.nrao.widar.gui.widget.LedElement
 
setColor(Color, Color) - Method in class edu.nrao.widar.gui.widget.LedElement
Set the colord of a bi-color Led.
setColor(String) - Method in class edu.nrao.widar.gui.widget.LedElement
Set the color of the Led to that specified by a String.
setColor(String, String) - Method in class edu.nrao.widar.gui.widget.LedElement
Set the colors of the bi-color Led to that specified by Strings.
setColor(Color) - Method in class edu.nrao.widar.gui.widget.LedPath
Set the color of the path.
setColor(String) - Method in class edu.nrao.widar.gui.widget.LedPath
Set the color of the path from a specified color String An attempt is made to match the color String to a known Led Color; if it can the path color is changed, if not, it is left unchanged.
setColor(Color) - Method in class edu.nrao.widar.gui.widget.LedSized
 
setColor(Color) - Method in class edu.nrao.widar.gui.widget.PixelGrid
 
setColor(Color) - Method in class edu.nrao.widar.gui.widget.PixelGrid2
 
setColor(Color) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the active colour for the VariableLed and restart.
setColorNoRefresh(Color) - Method in class edu.nrao.widar.gui.widget.LedSized
 
setCommIsSuccessful(boolean) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Set the color of the server panel border according to the specified server communications status.
setCommWindowSelected(boolean) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Sets the Selected Status of the Comm Window Button.
setCommWindowSelected(boolean) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Sets the Selected Status of the Comm Window Button.
setCompleteProductForAllUsedStreams(int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
SV September 2010 4 Stations per row/column (use one CCQ per baseline).
setCompleteTime() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Sets the completion time within the Diagnostic XML of the diagnostic to the current time value.
setComponentList(List<FrontPanel>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Supplied with a list of FrontPanel JAXB objects, the resident FrontPanel storage array is cleared and all members of the supplied list are added
setConcurrentDiagnosticSize(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Changes the current number of allowable concurrent diagnostics for the specified type
setConcurrentDiagnosticSize(DiagnosticType, int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Changes the current number of allowable concurrent diagnostics for the specified type
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
Unconditional change.
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setConfigChange(boolean, ConfigChangeStatus, boolean) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setConfigChange(boolean, ConfigChangeStatus, String) - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcCell
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcQuad
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.Station
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setConfigChangeAccepted() - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChangeAccepted(String) - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChangeActive() - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChangeBoardDisabled(String) - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChangeCommFailure(String) - Method in class ca.nrc.widar.vciMapper.Board
Set configCgangeStatus = commFailure (communication failure)
setConfigChangeFailed(String) - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChangeRejected(String) - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated. Unconditional change.
setConfigChangeStatus(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated. This method performs conditional change.
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
Unconditional change.
setConfigChangeStatus(ConfigChangeStatus, String) - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcCell
Unconditional change.
setConfigChangeStatus(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcCell
This method performs conditional change.
setConfigChangeStatus(ConfigChangeStatus, String) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setConfigChangeStatus(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setConfigChangeStatusDeep(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setConfigChangeTransmitted() - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigId(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setConfigId(String) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setConfigId(String) - Method in class ca.nrc.widar.vciMapper.Station
 
setConfigId(String) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
setConfigId(String) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setConfigId(String) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setConfigId(String) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setConfigName(String) - Method in class ca.nrc.widar.vciMapper.Board
 
setConfigPath(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setConfigPath(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Sets the current configuration XML path to the supplied value
setContentType(String) - Method in class ca.nrc.widar.mccc.crm.CrmHttpHandler
Sets the contentType for the response to the supplied value
setCorrChipAdminStatus(int, int, AdminStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
Set administrative status for Corr.
setCorrChipAdminStatus(AdminStatus[][]) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
Set administrative status for all Correaltor Chips on a Baseline Baord.
setCorrChipInput(String, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Output of the Recirculation Controller is input for the Correlator Chips.
setCorrChipInputForCrossOnly(String, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Output of the Recirculation Controller is input for the Correlator Chips.
setCrate(CrmCommon.Crate) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Set the Crate ID for this Board
setCreatedAt(long) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setCrmAtLeastOneDisabled(boolean) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
setCrmErrorReportTimeStamp(String) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
setCrmFileList(List<CrmFile>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setCrmFileList(List<CrmFile>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Sets the current list of CRM Configuration files to be used during a BlB-HST diagnostic to the supplied list of CrmFile XML objects, and then calls to update the display on the tab showing the user which files or configurations are to be used
setCrmIssue(CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbDisplayFrame
 
setCrmReportErrors(String) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
setCrmReportFields(boolean, String) - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
setDataPathAdminStatus(int, AdminStatus) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Set administrative status for output wafer
setDataPathAdminStatus(AdminStatus[]) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Set administrative status for output wafer
setDataProcPath(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setDataProcPath(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Set the current path name for data processing to the supplied value
setDebugMode(boolean) - Static method in class ca.nrc.widar.mccc.crm.Crm
Sets the Debug Mode status to the provided value
setDefault() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setDefaultBorder(Border) - Method in class edu.nrao.widar.gui.widget.ReadField
 
setDefaultConfiguration() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is used only when reConfigureCompleteBaselineBoards=true to force CM to transmit (default) configuration even if there is no change.
setDefaultOnly(boolean) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
setDefaultStbToXBarBoards() - Method in class ca.nrc.widar.vciMapper.StationRack
For a single Station Board, each wafer is connected to the same group/wafer on a different X-Bar Switch.
setDefaultSwBbName() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setDefaultXBarBoardsToBlb(StationRack) - Method in class ca.nrc.widar.vciMapper.CorrModel
Set Station Board to Baseline Board connections from Quads.
setDescriptor(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setDestAddressConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setDestBlb(Mlid, int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setDestIp(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setDestIp(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Sets the default destination IP Address value to the supplied string
setDestMac(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setDestMac(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Sets the default destination MAC Address value to the supplied string
setDestQuad(int, int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setDiagCondition(DiagConditionType) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sets the Diagnostic Condition value for this board post BLB-HST analysis
setDiagXml(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
Sets the currently stored Diagnostic XML object to the supplied value
setDisableAutoCorrForB_A(boolean) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setDiscardThisModel(boolean) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setDtEpoch(String) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Set epoch for DUMPTRIG
setDtEpoch(XMLGregorianCalendar) - Method in class ca.nrc.widar.vciMapper.Subarray
Set epoch for DUMPTRIG.
setDtEpoch(String) - Method in class ca.nrc.widar.vciMapper.SummedArray
Set epoch for DUMPTRIG
setDumpTrigFromA(int, boolean) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setDumpTrigFromA(boolean) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setDumpTrigId(int) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setDumpTrigSource(String, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setDumpTrigSource(String, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setDumpTrigStatusChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
setEnabled(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Affects the enabled button on the tab, setting its enabled state to the provided boolean value
setEnabled(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
Affects the enabled button on the tab, setting its enabled state to the provided boolean value
setEnabled(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Affects the enabled button on the tab, setting its enabled state to the provided boolean value
setEnabled(boolean) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setEnabled(boolean) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Set the enabled state of this switch.
setEndian(int) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Set the bit-sense of the lag frame reader according to the supplied parameter.
setEpoch(String) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
setErrorCode(String) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setErrorDetect(boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
setEverytingAdminEnabled() - Method in class ca.nrc.widar.vciMapper.CorrStatus
 
setFgConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setField(String, String) - Method in class edu.nrao.widar.gui.widget.BlankPanel
Set the value of JTextField component in this panel and return an indication of the success of the operation.
setFilterAdminStatus(int, int, AdminStatus) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Set administrative status for filter
setFilterAdminStatus(AdminStatus[][]) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Set administrative status for filter
setFilterGainParams(int, int, boolean, double, double, double, double, double, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
 
setFilterGainParams(boolean, double, double, double, double, double) - Method in class ca.nrc.widar.vciMapper.StbDataPath
Filter gain parameters are handled in a different manner: Forward parameter only if specified.
setFilterPolarization() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setFont(Font) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Overrides parent setFont to also set our fieldFont variable.
setFromInputStream(BlbRcInputStream) - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
setFromInputStream(BlbRcInputStream, Nibble) - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
setFromIntStreamNoRec(BlbRcInternalStream, int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setFromIntStreamNoRec(BlbRcInternalStream) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setFromIntStreamNoRecNotUsed(BlbRcInternalStream, int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
Same as method below, except for the use status.
setFromIntStreamRec(BlbRcInternalStream, int, int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
This method should be replaced with setOutputFromRecirculator()
setHelpText(String) - Method in class edu.nrao.widar.gui.widget.HelpLabel
Set the help text message.
setHost(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Set the hostname to the provided string
setHttpVisible(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setIdle() - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated. Sets CorrChip component idle.
setIdle() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setIdle() - Method in class ca.nrc.widar.vciMapper.CcCell
CcCell not used, i.e.
setIdle() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
setIdle() - Method in class ca.nrc.widar.vciMapper.CorrChip
Sets CorrChip component idle.
setIdle() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
Set output wafer as "not used".
setIdle() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
This method sets the default configuration for a single X-Bar Board output wafer, it is used to set the default configuration for the X-Bar Boards.
setIDs(String, boolean, int, int, int) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setIdsForA(int, int, int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setIdsForB(int, int, int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setIdsForC(int, int, int, boolean) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setIdsFromRecCont(BlbRecFpga) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setInitQuant(int, int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
setInitQuant(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
setInpQuant(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setInputDataStreams() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Used for stationPacking=minPack
setInputFromRCsOnTheFirstBoard(BaselineBoard) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setInputIsSumedArray(SummedArray, int, XBarBoardOutputWafer, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
Input for this RC input stream is the sum of array generated on RXP.
setInputStreamX(int, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CorrChip
Sets a single X input data stream.
setInputStreamY(int, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CorrChip
Sets a single Y input data stream.
setInputToOutput(int, int) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setInputWafer(int, XBarBoardOutputWafer) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setInputWafer(XBarBoardOutputWafer) - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
setInputWafer(int, XBarBoardOutputWafer) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Store localy input wafer which is input for this Recirculation Controller.
setInputWafer(int, XBarBoardOutputWafer, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Same as above, but returns boolean.
setInputWaferBasic(int, XBarBoardOutputWafer) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Used when adding input wafers to RCs on BLB0 so that they get forwarded to BLB1.
setInputWaferForAllInputs(XBarBoardOutputWafer, BlbRecFpga.RcUseMode, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Store localy input wafer which is input for this Recirculation Controller.
setInputWaferForAllInputs(XBarBoardOutputWafer, XBarBoardOutputWafer, BlbRecFpga.RcUseMode, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Same as above, but returns boolean.
setInputWaferForAllInputs(XBarBoardOutputWafer, XBarBoardOutputWafer, XBarBoardOutputWafer, XBarBoardOutputWafer, BlbRecFpga.RcUseMode, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Set RC input from 4 different Baseline Board input wafers.
setInputWaferForAllInputs(XBarBoardOutputWafer, XBarBoardOutputWafer, XBarBoardOutputWafer, XBarBoardOutputWafer, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Set RC input from 4 different Baseline Board input wafers.
setInputWaferForAllInputs2(XBarBoardOutputWafer, XBarBoardOutputWafer, BlbRecFpga.RcUseMode, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setInputWaferForFirstInput(XBarBoardOutputWafer, BlbRecFpga.RcUseMode, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Store localy input wafer which is input for this Recirculation Controller.
setInputWaferFromRcOnTheFirstBoard(XBarBoardOutputWafer, int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setInputWaferFromRcOnTheFirstBoard(BaselineBoard, int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setInputWafersRxpAndRcInputFromRCsOnTheFirstBoard(BaselineBoard, String, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
2012-03-19 SV: This method is used for stationPacking=onePerRowColumn
setInputWafersRxpAndRcInputFromTheFirstBoard(BaselineBoard, String, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Used for summed array 2011-04-28 This method is called when input on the 2nd BLB is not already configured.
setInpWafersRxpsRcsFromRcsOnTheFirstBoard(BaselineBoard, String, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setIntegFactor(int) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setInterFrameDelayConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setInterFrameDelayForConfigId(String, InterFrameDelayAlgType, int, boolean) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setInterFrameDelayForConfigId(String, InterFrameDelayAlgType, int, boolean) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setInterFrameDelayParams(InterFrameDelayAlgType, int, boolean) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setInterFrameDelayParams(InterFrameDelayAlgType, int, boolean) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Used when creating subarray.
setInternalText(String) - Method in class edu.nrao.widar.gui.widget.ChoiceField
 
setInterval(Long) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the BLINK/PULSE interval to the supplied value and restart the VariableLed
setInterval(int) - Method in class edu.nrao.widar.gui.widget.RefreshPanel
Sets the refresh interval.
setInterval(int) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Sets the refresh interval.
setInterval(Long) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the BLINK/PULSE interval to the supplied value and restart the VariableLed
setInvalidZeroFill(boolean) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setInWaferAdminStatus(int, AdminStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
setInWaferAdminStatus(AdminStatus[]) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
setIpAddress(String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Set the IP Address Value for this Board
setIpAddress(String) - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
setIpAddress(String) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Sets the IP address of the server.
setIpAddress(String) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Sets the IP address of the server.
setIpAddress(String) - Method in class edu.nrao.widar.util.HttpLink
Sets the URL host string for this HttpLink.
setIpAddresses(String[]) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Replaces the single IP address field with a drop down box of IP address choices.
setIpAddresses(String[]) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Replaces the single IP address field with a drop down box of IP address choices.
setIpAddressIndex(int) - Method in class edu.nrao.widar.gui.widget.ServerPanel
 
setLagCollectionDuration(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setLagCollectionDuration(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Sets the Duration of lag collection
setLagged(int, int, int) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setLastCbeAlert(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
setLastSendCfgCompletedAt(long) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setLastVciAlert(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
setListOfActTriggers(List<ActivationTrigger>) - Method in class ca.nrc.widar.vciMapper.CorrModel
Used for re-mapping, when we are re-applying previously received set of messages to a new "startFrom" model
setListOfMessages(List<Object>) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setListOfStations(ArrayList<Station>) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setListOfStations(ArrayList<Integer>, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SummedArray
User can specify list of stations to be excluded from the sum.
setLogBlbMessages(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogCbeMessages(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogCrmMessages(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogLevel(VciLogLevel) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogStbMessages(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogToFile(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogVciMessages(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogXAlerts(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLogXbbMessages(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
setLtaPortConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setMacAddress(String) - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
setMixerPEC(boolean) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setMlid(Mlid) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setMlid(Mlid) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setMode(StbHstDpModeType) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
setMode(int) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the active mode for the VariableLed and restart.
setMode(int) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the active mode for the VariableLed and restart.
setName(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Sets the current database name to the provided String
setName(String) - Method in class ca.nrc.widar.vciMapper.Board
 
setName(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setName(String) - Method in class ca.nrc.widar.vciMapper.Crate
 
setName(String) - Method in class ca.nrc.widar.vciMapper.Mlid
Unlike Rack, Crate and Slot IDs, board name may change.
setName(String) - Method in class ca.nrc.widar.vciMapper.Rack
 
setName(String) - Method in class ca.nrc.widar.vciMapper.Station
 
setName(String) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setName(String) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setName(String) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setNewCorrModelForDifferentActTime(long, CorrModel) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setNewCorrModelForSameActTime(long, CorrModel) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setNibble(Nibble) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
Select output for 7-bit input data stream.
setNibble(Nibble) - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
Select output for 7-bit input data stream.
setNoConfigChange() - Method in class ca.nrc.widar.vciMapper.Board
 
setNoInputWafer() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
setNoRec() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setNoRec(int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
In this case "block size" is used to indicate number od adjacent CCCs that are used to produce lags for products.
setNotAssignedAndIdle() - Method in class ca.nrc.widar.vciMapper.StationBoard
Set: Station Board not assigned to a station.
setNotAssignedAndIdle() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setNotAssignedAndIdle() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setNotPair(int, int) - Method in class ca.nrc.widar.vciMapper.Station
 
setNotPairMember() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setNotPairMember() - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setNotSubarrayMember() - Method in class ca.nrc.widar.vciMapper.Station
 
setNotUsed() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setNotUsed() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
setNumBins(int) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
setNumChannels(int) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setNumChannels(int) - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
setNumLags(int) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setObservationTime(long) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setOff() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led to OFF.
setOff() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led to OFF.
setOffColor(Color) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the colour to display when the VariableLed is OFF.
setOffColor(Color) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the colour to display when the VariableLed is OFF.
setOn(boolean) - Method in class edu.nrao.widar.gui.widget.Led
Set the ON/OFF state of the Led.
setOn(String) - Method in class edu.nrao.widar.gui.widget.Led
Set the ON/OFF state of the Led.
setOn() - Method in class edu.nrao.widar.gui.widget.Led
Set the Led to ON.
setOn(boolean) - Method in class edu.nrao.widar.gui.widget.LedElement
Set the ON/OFF state of the Led.
setOn(String) - Method in class edu.nrao.widar.gui.widget.LedElement
Set the ON/OFF state of the Led.
setOn() - Method in class edu.nrao.widar.gui.widget.LedElement
Set the Led to ON.
setOperStatus(OperStatus, String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setOperStatus(OperStatus) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setOperStatusCommFailure(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setOperStatusDisabled(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setOperStatusOk(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setOperStatusUnknown(String) - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
setOutputForBaselinesAndAutoCorrsFirstBlb(int, int, int, int, Nibble, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Set Recirculation Controller output for the first Baseline Board in a pair for: stationPacking=maxPack, autoCorrAlgorithm=ALL_STATIONS_MAX_PROD This method is used to set Recirculation Controllers in the row/column with mix of 'regular' baselines and auto-corr.
setOutputForBaselinesAndAutoCorrsSecondBlb(int, int, int, int, Nibble, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Set Recirculation Controller output for the 2nd Baseline Board in a pair.
setOutputForTwoStationsRq4(boolean, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
1) create input streams 0 and 1 from the inputWafer[0] 2) create input streams 2 and 3 from the inputWafer[1] On the side X of the 1st BLB in a BLB pair: Side X: 1st Station: inputStreams 0/1 to internalStreams 0/1 and output Streams 0/1 2nd Station: inputStreams 2/3 to internalStreams 2/3, 4/5 and 6/7 and outputStreams 2/3, 4/5 and 6/7 All other RCs: 1st Station: inputStreams 2/3 to internalStreams 0/1 and output Streams 0/1 2nd Station: inputStreams 0/1 to internalStreams 2/3, 4/5 and 6/7 and outputStreams 2/3, 4/5 and 6/7
setOutputFromRec(int, int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
2010-10-18: sampleRate is set in method set4BitStreamFromRec
setOutputFromRecirculator(BlbRcInternalStream, int, int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setOutputFromWafers0And1(int, int, int, int, boolean, Nibble, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
This method is used to set RC output for stationPacking=onePerRowColumn, halfStationsMaxProd Use input wafers 0 and 1, ignore input wafers 2 and 3.
setOutputSt4(int, int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
This method used when nibble does not matter (4-bit correlation).
setOutputSt4(int, int, int, int, int, Nibble) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Recirculation controller gets input from up to 4 stations.
setOutWaferAdminStatus(int, AdminStatus) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Set administrative status for output wafer
setOutWaferAdminStatus(AdminStatus[]) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Set administrative status for output wafer
setPairId(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setPairId(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
setParams(int, int, boolean) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setPolarization(PolarizationType) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setPortForLtaFrames(String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setPositionInPair(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setPositionInPair(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
setPpGroup(PolProductGroup) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setProductDestination(NodeMaps) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setProductDestination(ProductDestinations) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setProductForSum(PolarizationProduct, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setProductId(int) - Method in class ca.nrc.widar.vciMapper.CcCell
 
setProductMode(ProductMode) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setPrompt(int, int, int) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
setPulse(Long) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the VariableLed to PULSE mode with the specified interval (ms) and restart.
setPulse(Long, Color) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the VariableLed to PULSE mode with the specified interval (ms) and and a new colour.
setPulse(Long) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the VariableLed to PULSE mode with the specified interval (ms) and restart.
setPulse(Long, Color) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the VariableLed to PULSE mode with the specified interval (ms) and and a new colour.
setQuadPosition(int, int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
setQuadrantId(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setQuadrantId(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
setQueryDelayCounter(int) - Method in class ca.nrc.widar.vciMapper.Board
Set "query retransmit delay conter".
setQueryStartString(String) - Method in class edu.nrao.widar.gui.widget.SingleRegisterPanel
Set the Query Start String.
setRack(Integer) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Set the Rack ID for this Board
setRackID(Integer) - Method in class ca.nrc.widar.mccc.crm.CrmRack
Set the Rack ID values based on the integer ID provided
setRC7inputFromFirstBlb(String, BaselineBoard, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setRcInputBlb0(String, ArrayList<Integer>, int, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Older version before 09.09.2010 SonjaVrcic added autoCorrAlgorithm=allStations.
setRcInputBlb0FourStPerRowColumn(String, ArrayList<Integer>, int, int, int, int, BlbRecFpga.RcUseMode, AutoCorrAlgorithmType, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Replaced by setRcInputForFourStationsPerRowColumn() (setRcInputBlb0FourStPerRowColumnVersion3()).
setRcInputBlb0OneStationPerRowColumn(String, List<Integer>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setRcInputBlb0St1AcAllStMaxProd(int, List<Integer>, List<Integer>, List<Integer>, String, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is used to set Baseline Boards on the diagonal for:

station packing algorithm = MIN_PACK, one station per row/column.

setRcInputBlb0St1AcAllStMaxProd(String, List<Integer>, List<Integer>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Deprecated. This method is used to set Baseline Boards on the diagonal for:

station packing algorithm = MIN_PACK, one station per row/column.

product (lag chain) packing algorithm = MAX_PACK

correlation = 4-bits

with or without recirculation

auto-correlation algorithm = ALL_STATIONS_MAX_PROD

number of products = 4 (full polarization) single segment products For stationsToConfigure: 1st BLB: product above diagonal: product A*A, below diagonal:product A*B, on the diagonal: product A*A 2nd BLB: product above diagonal: product B*B, below diagonal:product B*A, on the diagonal: product B*B For stationsForAutoProdAb: On CorrChips on the diagonal configure product a*b. Each board (0 / 1) can produce different set of products. Set two stations per row/column, one for each BLB. This method sets RXP switch so that each row/column (i.e. Recirculation Controller) gets input from one station (subband pair from Baseband A and B).

setRcInputBlb0St2AcHalfStMaxProd(String, List<Integer>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
stationPacking=twoPerRowColumn 2012-03-07 SV - need to re-write this method.
setRcInputBlb1(String, BaselineBoard, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is used to set the 2nd BLB in a BLB pair.
setRcInputBlb1OneStPerRowColumn(String, ArrayList<Integer>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
One station per row/column.
setRcInputBlb1St2AcHalfStMaxProd(String, List<Integer>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
stationPacking=twoPerRowColumn 2012-03-07 SV - need to re-write this method.
setRcInputDataStreams(String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Used for stationPacking=minPack, boards with cross-correlations only, 2nd BLB in a pair.
setRcInputForCompleteStOnePerRowCrossBlb0Rq4(int[][], int, String, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Deprecated.  
setRcInputForCompleteStOnePerRowCrossBlb1Rq4(BaselineBoard, int[][], int, String, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Deprecated.  
setRcInputForFourStationsPerRowColumn(String, ArrayList<Integer>, int, int, int, BlbRecFpga.RcUseMode, ArrayList<Integer>, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
For autoCorrAlgorithm=allStationsMaxProd and (number of stations MOD 4) > 0 add auto-corr only stations to the last row/column used for baselines.
setRcInputForSegmentStOnePerRowCrossBlb0Rq4(int[][][][], int, String, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Deprecated.  
setRcInputForStOnePerRowCrossBlb0Rq4(int[][][][], int, int, String, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setRcInputForStOnePerRowCrossBlb1Rq4(BaselineBoard, int[][][][], int, int, String, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Deprecated.  
setRcInputSt1AcHalfStMaxProdStartFromFirst(String, List<Integer>, List<Integer>, int, int, int, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setRcInputSt1AcHalfStMaxProdStartFromSecond(String, List<Integer>, List<Integer>, int, int, int, boolean, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setRcOutputForOnePerRowColumn(String, int, int, int, int, boolean, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Mapping for:

station packing = one station per row/column.

setRcOutputForOneStationCross(String, int, int, int, int, boolean, Nibble, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Mapping for:

station packing = one station per row/column.

setRcOutputForOneStationDiag(String, int, int, int, int, boolean, Nibble, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Mapping for:

station packing = one station per row/column.

setRcXInputForOneStationPerColumn(int, String, int, int, int, int, boolean, Nibble, int, int, List<Integer>, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setRcYInputForOneStationPerRow(int, int[], String, int, int, int, int, boolean, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setRecBlockEnd(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
This method should check whether block end is valid.
setRecBlockSize(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
This method should check whether block size is valid.
setRecBlockStart(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
This method should check whether block start is valid.
setRecBlockTotal(int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
This method should check whether block total is valid.
setRecContAdminStatus(int, int, AdminStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
Set administrative status for Recirculation Controller
setRecContAdminStatus(AdminStatus[][]) - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
Set administrative status for Recirculation Controller
setRecContOutput_strightForward(String, int, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Set Recirculation Controller output for 4-bit correlation.
setRecContOutputFromWafers0And1(String, int, int, int, int, boolean, Nibble, Nibble, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is used to set RC output for stationPacking=onePerRowColumn, halfStationsMaxProd
setRecCount(int) - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
setRecEnabled(boolean) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setRecFactor(int) - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
setRecIndex(int, int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
setRecIndex(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardCcc
 
setRecIndex(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
 
setReConfigureCompleteBaselineBoards(boolean) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setReConfigureCompleteBaselineBoards(boolean) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setReConfigureCompleteBaselineBoards(boolean) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setRecPayloadIsData(int, boolean) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setRecStreamSource(int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setRefreshInterval(int) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Sets the Refresh Interval for this screen.
setRefreshInterval(int) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Sets the Refresh Interval for this screen.
setRegisterValue(int, int) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Sets the displayed value of the specified register.
setReportNextCommFailure(boolean) - Method in class ca.nrc.widar.vciMapper.Board
 
setReQuant(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setRetDelayCounter(int) - Method in class ca.nrc.widar.vciMapper.Board
Set "retransmit delay conter".
setRevokeTransmittedCfg(boolean) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setRfiConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setRfiParamsForCreate(int, int) - Method in class ca.nrc.widar.vciMapper.StbFilter
This method is used when VCI create subarray is received.
setRxpInputFromRCsOnTheFirstBoard(BaselineBoard) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is used for Autocorrelator Mode.
setRxpSyncTimeout(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setRxpSyncTimeout(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Set the RXP Synchronization Timeout value in seconds
setSampleForA(int, long) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSampleForB(int, long) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSampleRate(long) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setSampleRateForA(long) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSampleRateForB(long) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSampleSize(int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setSampleSizeForA(int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSampleSizeForB(int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSbId(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Sets the Subband ID for the specified data channel to the provided value, or makes no change if the data channel ID is out of allowable range.
setSBID(int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setSBID(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setSBID(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setScanId(String) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setScreenLocked(boolean) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
Set the boolean value of the screen lock.
setScreenLocked(boolean) - Method in class edu.nrao.widar.gui.widget.MainFrame
Deprecated. Set the boolean value of the screen lock.
setSegmentForAllUsedStreams(int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
SV September 2010 SV 2012-02-17 Updated to set R2C bit Configure Rec.Controller to produce data for a segment of a lag chain for all used input streams (up to 8).
setSelected(boolean) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the on/off state of the switch in accordance with a specified state boolean.
setSelected(String) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Convenience method to set the on/off state of the switch from a String.
setSelected(boolean) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Sets the on/off state of the switch to a specified state boolean.
setSelected(String) - Method in class edu.nrao.widar.gui.widget.SafetySwitch2
Convenience method to set the on/off state of the switch from a String.
setSelectedButton(AbstractButton) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Set the specified button in the group to selected.
setSelectedButton(AbstractButton, boolean) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Set the selection state of a button in the group.
setSelectedButton(int, boolean) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Set the selection state of a button at a specified index in the group.
setSelectedIndex(int) - Method in class edu.nrao.widar.gui.widget.BetterButtonGroup
Set the button at the specified index in the group to selected.
setSelectedIndex(int) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Sets the ChoiceField to display the item at the specified index.
setSelectedIndex(int, int) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Sets the ChoiceField to display the item at the specified index concatenated with the item at its specified sub-index.
setSID(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setSID(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setSideband(int, UpperLowerType, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
 
setSideband(UpperLowerType) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setSidebandConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setSignalToNoise(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setSingleBB(int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setSingleBB(int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setSinglePhCenter(boolean) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setSingleQuadForStMaxPack(int, PolarizationProduct, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Set quad for stationPacking=MAX_PACK and productPacking=MAX_PACK Each quad is used for a different baseline, which means that there is a direct correspondence between Quad ID and input stream ID Some of the ccCells in the CCQ are already used.
setSlot(Integer) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Set the Slot ID for this Board
setSlotName(int, String) - Method in class ca.nrc.widar.vciMapper.Crate
 
setSN(String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Set the Serial Number value
setSolid() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the VariableLed to SOLID mode and restart.
setSolid(Color) - Method in class ca.nrc.widar.mccc.crm.VariableLed
Set the VariableLed to SOLID mode with the specified colour and restart.
setSolid() - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the VariableLed to SOLID mode and restart.
setSolid(Color) - Method in class edu.nrao.widar.gui.widget.VariableLed
Set the VariableLed to SOLID mode with the specified colour and restart.
setSortByColumn(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Set the sort criteria column with the supplied value
setSortDirection() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Sets a new value for sort direction
setSource(StbSourceType, Integer) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setSourceForA(int, int, int, String) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSourceForANotKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSourceForB(int, int, int, String) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSourceForBNotKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSourceForC(int, int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSourceForCNotKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSpectralWindowParams(SwBbType, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setSquelch() - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Sets the selected state of the squelchEnabled variable.
setSquelch() - Method in class edu.nrao.widar.gui.widget.ServerPanel
Sets the selected state of the squelchEnabled variable.
setSquelchSelected(boolean) - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Sets the selected state of the squelch button.
setSquelchSelected(boolean) - Method in class edu.nrao.widar.gui.widget.ServerPanel
Sets the selected state of the squelch button.
setSrcFilterId(int, int) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setStage(int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Sets the new stage value
setStandby(boolean) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
setStandby(boolean) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setStartEnabled(boolean) - Method in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
setStartTime() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Sets the start time within the Diagnostic XML of the diagnostic to the current time value.
setState(int) - Method in class edu.nrao.widar.gui.widget.SafetySwitch
Set the state of the SafetySwitch.
setStation(String) - Method in class ca.nrc.widar.mccc.crm.CrmBoard
Set the Station ID value for this Board
setStation(Integer) - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Set the station ID using the supplied integer value.
setStation(String) - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Set the station ID using the supplied String value.
setStationId(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setStationId(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Sets the current station ID for use with single-station mode
setStationId(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
setStationStatus(StationStatus) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
setStationStatus(StationStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setStationStatus(StationStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setStatus(Subarray.CbeConfigStatus) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
setStatus(Subarray.CbeConfigStatus) - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
setStatusDescriptor(String) - Method in class ca.nrc.widar.vciMapper.Board
 
setStbConfigChange(Mlid) - Method in class ca.nrc.widar.vciMapper.Station
 
setStbFirstForward(boolean) - Method in class ca.nrc.widar.vciMapper.CorrModel
 
setStbOutput(int, int, int) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setStId(int, int) - Method in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
Sets the Station ID for the specified data channel to the provided value, or makes no change if the data channel ID is out of allowable range.
setStMaxPackAllXFirstY(ArrayList<PolarizationProduct>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setStMaxPackAllXFirstYSkipAutoOnly(ArrayList<PolarizationProduct>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setStMaxPackAutoCorrOnly(ArrayList<PolarizationProduct>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setStMaxPackBlb1Diagonal(ArrayList<PolarizationProduct>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setStMaxPackBlb1DiagThreeBaselines(PolarizationProduct, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Configure CorrChip on the diagonal for the case when 3 inputs are used for baselines and one for auto-correlations.
setStMaxPackFirstXAllY(ArrayList<PolarizationProduct>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setStMaxPackFirstXAllYAutoCorrs(PolarizationProduct, int, int, int, int[], ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setStMaxPackFirstXAllYSkipAutoOnly(ArrayList<PolarizationProduct>, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setStop(boolean) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Sets the stop flag to the supplied value.
setSubband(int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
Sets the new subband value
setSumBbid(int) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSumConfigId(String) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSumEnabled(boolean, String) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSumInputStream(int) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSummaryIndex(int, int, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
Sets the Summary Index value for the specified chip - see CrmBaselineBoardChip for a definition of the values used
setSummaryIndex(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoardChip
Set/Get the summary index for this chip.
setSumOnStreamB(int, int) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
setSumProductOnCorrChip77(PolarizationProduct, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setSumSampleRate(long) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSumSbid(int) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSumSetupDefault() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSumSid(int) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSumsLowerRxpsForBlb1(SummedArray, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setSumWaferMask(long) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setSwBbName(int, int, String) - Method in class ca.nrc.widar.vciMapper.Station
 
setSwBbName(int, String) - Method in class ca.nrc.widar.vciMapper.Station
 
setSwBbName(String) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setSwIndex(int) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setSwPwrEpoch(int, int, XMLGregorianCalendar) - Method in class ca.nrc.widar.vciMapper.Station
Set epoch for integration of Station Board swiched power counts.
setSwPwrEpoch(int, XMLGregorianCalendar) - Method in class ca.nrc.widar.vciMapper.Station
Set epoch for integration of Station Board swiched power counts.
setSwPwrEpoch(XMLGregorianCalendar) - Method in class ca.nrc.widar.vciMapper.StbDataPath
Set epoch for integration of Station Board swiched power counts.
setSwPwrInteg(int, int, int) - Method in class ca.nrc.widar.vciMapper.Station
Set switched power integration time in milliseconds (Station Board parameter).
setSwPwrInteg(int, int) - Method in class ca.nrc.widar.vciMapper.Station
Set switched power integration time in milliseconds (Station Board parameter).
setSwPwrInteg(int) - Method in class ca.nrc.widar.vciMapper.StbDataPath
Set switched power integration time in milliseconds (Station Board parameter).
setSyncCheck(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setSyncCheck(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Sets the Synchronization Check/CRC Error Check interval in seconds
setSystemWide(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
setSystemWide(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabCsd
Sets the system widw mode to the specified value
setText(String) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
setText(String) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Sets the text of the field and its corresponding index value.
setThresholdExponent(int) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
setTimeOffset(long) - Method in class edu.nrao.widar.gui.widget.Clock
Sets a time offset in millis that can be used to synchronize the displayed time with another system.
setTimeZone(int) - Method in class edu.nrao.widar.gui.widget.Clock
Sets timezone by specifying the index of the timezone choice field.
setTitle(String) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
 
setToIndex(int) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Deprecated. Use setSelectedIndex
setToIndex(int, int) - Method in class edu.nrao.widar.gui.widget.ChoiceField
Deprecated. Use setSelectedIndex
setTransmitConfigChange() - Method in class ca.nrc.widar.vciMapper.Board
 
setTwoSumsOnCorrChip77(int, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setUniformCfg(boolean) - Method in class ca.nrc.widar.vciMapper.Subarray
 
setUrl(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Sets the current CRM DB URL to the supplied value
setUrlHost(String) - Method in class edu.nrao.widar.util.HttpLink
Sets the URL host string for this HttpLink.
setUrlPath(String) - Method in class edu.nrao.widar.util.HttpLink
Sets the value of this HttpLink's path.
setUrlPort(int) - Method in class edu.nrao.widar.util.HttpLink
Sets the value of this HttpLink's port.
setUrlQuery(String) - Method in class edu.nrao.widar.util.HttpLink
Sets the value of this HttpLink's URL query portion.
setUseBaselineDumpTrig(boolean) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setUseBlbAllProducts(int, int, int) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
setUsed(boolean) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
setUsed(boolean) - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
setUsed(PolarizationProduct) - Method in class ca.nrc.widar.vciMapper.CcCell
This method is called during mapping to configure individual ccCell.
setUsed() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
setUsedForSumAutoCorr(int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setUsedForSumAutoCorr(boolean) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setUseMixer(boolean) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setUseMode(BlbRecFpga.RcUseMode) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setUseMode(UseStatus, BlbRecFpga.RcUseMode) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setUseMode(UseStatus, BlbRecFpga.RcUseMode, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setUseMode(UseStatus, String, BlbRecFpga.RcUseMode) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setUseModeCfgInProgress(UseStatus, String, BlbRecFpga.RcUseMode) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
setUser(String) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
Set the username for the CRM DB to the supplied value
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.BlbLtaFpga
Deprecated.  
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.Board
 
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.Station
 
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
setUseStatus(UseStatus) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setValue(int) - Method in class edu.nrao.widar.gui.widget.FanTachometer
 
setValue(String) - Method in class edu.nrao.widar.gui.widget.FanTachometer
 
setVciAlertActive(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
setVciSchemaValidation(boolean) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Enable/disable schema validation
setVdifConfigChange(boolean, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
setVdifDefault() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setVdifStatus(boolean) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setVdifUseBlbIndicators(boolean[][][]) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
setVerbose(boolean) - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Set the logging verbosity
setVerbose(boolean) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Change the verbosity value
setVisible(boolean) - Static method in class edu.nrao.widar.util.HttpClientLink
Opens/closes the HttpClientLink status window at a default screen location.
setVisible(boolean, int, int, int, int) - Static method in class edu.nrao.widar.util.HttpClientLink
Opens/closes the HttpClientLink status window at a specified x/y screen location.
setVisible(boolean, Rectangle) - Static method in class edu.nrao.widar.util.HttpClientLink
Opens/closes the HttpClientLink status window at a specified x/y screen location.
setVisible(boolean) - Static method in class edu.nrao.widar.util.HttpLink
Opens/closes the HttpLink status window at a default screen location.
setVisible(boolean, int, int, int, int) - Static method in class edu.nrao.widar.util.HttpLink
Opens/closes the HttpLink status window at a specified x/y screen location.
setVisible(boolean, Rectangle) - Static method in class edu.nrao.widar.util.HttpLink
Opens/closes the HttpLink status window at a specified x/y screen location.
setWbcAdminStatus(AdminStatus) - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
Set administrative status for output wafer
setWbcProduct(Wpp, int, int, int, List<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
setWbcProducts(int, int, List<Wpp>, List<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
 
setXBarInput(int, int, int) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
setXbarToDefault() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
setXInput(CcCell.Source, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CcCell
 
setXInput0(CcQuad.Source, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CcQuad
 
setXInput1(CcQuad.Source, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CcQuad
 
setXInputFromRecCont(BlbRecFpga) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
setXmlMonitorMode(boolean) - Static method in class ca.nrc.widar.mccc.crm.Crm
Sets the xmlMonitorMode status to the provided value
setXmlSourceDirectory(String) - Method in class ca.nrc.widar.mccc.crm.CrmBlbHSXmlConfig
 
setYInput(CcCell.Source, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CcCell
 
setYInput0(CcQuad.Source, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CcQuad
 
setYInput1(CcQuad.Source, BlbDataStream) - Method in class ca.nrc.widar.vciMapper.CcQuad
 
setYInputFromRecCont(BlbRecFpga) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
severe(String) - Static method in class edu.nrao.widar.util.Log
Log a SEVERE message.
shortForm() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.BoardType
 
shortListOfStations() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
shortListOfStations() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
showConfig() - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
Generate output directed to the System.out stream which details the current correlator configuration.
showConfirmDialog(Component, Object, String, int, int) - Static method in class edu.nrao.widar.gui.widget.NarrowOptionPane
Brings up a dialog where the number of choices is determined by the optionType parameter, where the messageType parameter determines the icon to display.
showDiagnostic(Vector<Diagnostic>) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
A convenience method for the showDiagnostic method which allows it to be called with a list of diagnostics, rather than only one
showDiagnostic(Diagnostic) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
A method which displays the supplied Diagnostic object in its own message dialog
showDiagnosticXml(Diagnostic) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
This method takes the supplied Diagnostic XML object, converts it to a string and displays the XML text in an HTML Display Frame
showMemoryUsage(String) - Static method in class ca.nrc.widar.mccc.crm.Crm
Prints a memory usage summary (including thread count) to the console
showMessageDialog(Component, Object, String, int) - Static method in class edu.nrao.widar.gui.widget.NarrowOptionPane
Brings up a dialog that displays a message using a default icon determined by the messageType parameter.
showMessageDialog(Component, Object, String, int, Icon) - Static method in class edu.nrao.widar.gui.widget.NarrowOptionPane
Brings up a dialog that displays a message using a specified icon According to the tech tip:
showThreadSummary() - Static method in class ca.nrc.widar.mccc.crm.Crm
Prints a Thread Summary to the console
shutdown() - Method in class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
Shutdown the Thread Pool
sId - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
sidBbidSbidEquals - Static variable in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
sideband - Variable in class ca.nrc.widar.vciMapper.StbDataPath
Sideband as specified in the VCI message: upper or lower

In VCI sideband is attribute of stationInputOutput/Baseband.

sidebandChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
sidebandConfigChange - Variable in class ca.nrc.widar.vciMapper.StbDataPath
Indication whether or not sideband changed.
simulateOutputs() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
 
simulateQuadrantStatus(ObjectFactory) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
A method that is run during safeMode operation which performs the same function as refreshQuadrantStatus() without probing the physical system for information, rather generating simulated data to achieve the same result
simulateRecircStateRequest(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
simulateRecirculatorHmReceiverXml(String) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
simulateRecirculatorHmReceiverXml(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
simulateRecirculatorInputStreamConfigXml(int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
simulateRecirculatorSetupXml(String, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
simulateRecirculatorXml(String, int) - Method in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
simulateRxpInputsXml(CsdModeType, int, int, ObjectFactory) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
Method used to generate raw RxpInputs XML, and modify them to suit a test operation.
simulateRxpInputsXmlList(CsdModeType, int, ObjectFactory) - Method in class ca.nrc.widar.mccc.crm.CrmQuadrant
A method used to generate simulated RxpInputs for testing purposes, this is invoked in the place of getRxpInputs when safe mode is activated.
simulateStationStatus(CsdModeType, int) - Method in class ca.nrc.widar.mccc.crm.CrmStation
A method used to test the Diagnostics by explicitly setting station status, rather than reading it from actual stations.
SingleMcbRegisterPanel - Class in edu.nrao.widar.gui.widget
A Sub-Panel to allow reading and writing a single register in any device on a board using a 16-bit address.
SingleMcbRegisterPanel(DeviceIdentifier) - Constructor for class edu.nrao.widar.gui.widget.SingleMcbRegisterPanel
Creates a new SingleMcbRegisterPanel.
SingleRegisterPanel - Class in edu.nrao.widar.gui.widget
A Sub-Panel to allow reading and writing a single register.
SingleRegisterPanel(ServerPanel, String, String) - Constructor for class edu.nrao.widar.gui.widget.SingleRegisterPanel
Creates a new SingleRegisterPanel using a ServerPanel supply and maintain the server's IP address.
SingleRegisterPanel(DeviceIdentifier, String, String) - Constructor for class edu.nrao.widar.gui.widget.SingleRegisterPanel
Creates a new SingleRegisterPanel using a DeviceIdentifier to supply and maintain the server's IP address.
SingleRegisterPanel(String, String, String) - Constructor for class edu.nrao.widar.gui.widget.SingleRegisterPanel
Deprecated. This will break if the IP address changes, instead use SingleRegisterPanel(DeviceIdentifier, String, String).
skipFrame() - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Skips the file pointer ahead in the file to the start of the next lag frame
skipFrame(int) - Method in class ca.nrc.widar.mccc.crm.CrmBLFFile
Skips 'n' lag frames ahead in the file
slot - Variable in class edu.nrao.widar.util.DeviceIdentifier
 
slotID - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
slotIsEmpty(int) - Method in class ca.nrc.widar.vciMapper.Crate
 
slotIsEmpty(int, int) - Method in class ca.nrc.widar.vciMapper.Rack
 
SLOTS_IN_CRATE - Static variable in class ca.nrc.widar.vciMapper.Crate
 
sn - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
sn - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 
snMap - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
SNMP_ERROR_BAD_VALUE - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_ERROR_GEN_ERROR - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_ERROR_NO_ERROR - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_ERROR_NO_SUCH_NAME - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_ERROR_READ_ONLY - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_ERROR_TOO_BIG - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_BIT_STRING - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_COUNTER32 - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_COUNTER64 - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_GAUGE32 - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_GET_NEXT_REQUEST - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_GET_REQUEST - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_GET_RESPONSE - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_INTEGER - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_IP_ADDRESS - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_NULL - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_OBJECT_IDENTIFIER - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_OCTET_STRING - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_OPAQUE - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_SEQUENCE - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_SET_REQUEST - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_SNAP_ADDRESS - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_TIME_TICKS - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_TRAP - Static variable in class edu.nrao.widar.util.SnmpUtil
 
SNMP_TYPE_UINTEGER32 - Static variable in class edu.nrao.widar.util.SnmpUtil
 
snmpQuery(String, byte[]) - Static method in class edu.nrao.widar.util.SnmpUtil
Query an SNMP device.
SnmpTrapManager - Class in edu.nrao.widar.util
SNMP Trap Manager provides a Thread that listens for SNMP Traps on the SNMP Trap port.
SnmpTrapManager() - Constructor for class edu.nrao.widar.util.SnmpTrapManager
 
SnmpTrapManager.SnmpTrapEvent - Class in edu.nrao.widar.util
 
SnmpTrapManager.SnmpTrapEvent(Object, InetAddress, int, Hashtable<String, Object>) - Constructor for class edu.nrao.widar.util.SnmpTrapManager.SnmpTrapEvent
Create a new SnmpTrapEvent.
SnmpTrapManager.SnmpTrapListener - Interface in edu.nrao.widar.util
 
snmpTrapReceived(SnmpTrapManager.SnmpTrapEvent) - Method in interface edu.nrao.widar.util.SnmpTrapManager.SnmpTrapListener
 
SnmpUtil - Class in edu.nrao.widar.util
SnmpUtil provides a set of utility methods for querying SNMP devices and parsing and creating SNMP messages.
SnmpUtil() - Constructor for class edu.nrao.widar.util.SnmpUtil
 
SnmpUtil.SnmpMessage - Class in edu.nrao.widar.util
 
SnmpUtil.SnmpMessage(byte[]) - Constructor for class edu.nrao.widar.util.SnmpUtil.SnmpMessage
Constructs an SnmpMessage from an array of bytes.
snmpVersion - Variable in class edu.nrao.widar.util.SnmpUtil.SnmpMessage
 
snString - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
socket - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
 
softBevelBorderLowered - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
softBevelBorderRaised - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
softwareError - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
SOLID - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
SOLID - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
sortByColumn - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
sortDirection - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
 
sortPacket(DatagramPacket) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Receives lag frame packets from Baseline Boards, determines which diagnostic (board sn) each packet belongs to and routes the packets accordingly to the appropriate BlfReceiver objects
sortTable() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
 
sortTable() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
 
sortTable() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTableModel
Sorts the current active process table
Sound - Class in edu.nrao.widar.gui.widget
A Sound player.
Sound(String) - Constructor for class edu.nrao.widar.gui.widget.Sound
 
Sound.AudioPlayerThread - Class in edu.nrao.widar.gui.widget
 
Sound.AudioPlayerThread(String) - Constructor for class edu.nrao.widar.gui.widget.Sound.AudioPlayerThread
 
sourceForAKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
sourceForBKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
sourceForCKnown() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
SpectralWindow - Class in ca.nrc.widar.vciMapper
 
SpectralWindow(int, SwBbType, int, int, boolean) - Constructor for class ca.nrc.widar.vciMapper.SpectralWindow
 
spectralWindowCfgOk(XMLGregorianCalendar, long, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Subarray
 
SpigotListener - Class in edu.nrao.widar.util
A class for listening to CMIB data spigots opened with the HttpClientLink.getServerPushInputStream() method.
SpigotListener() - Constructor for class edu.nrao.widar.util.SpigotListener
 
sql - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
sqlString - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
squelchIsSelected() - Method in class edu.nrao.widar.gui.widget.OldServerPanel
Returns the Selected Status of the Squelch Button.
squelchIsSelected() - Method in class edu.nrao.widar.gui.widget.ServerPanel
Returns the Selected Status of the Squelch Button.
squelchPopups - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Note: when running as GUI, status of this variable can be modified from popup windows.
st4Rq7CfgAllXFirstY(PolarizationProduct, SubProductType, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Deprecated. 4 stations per row/column, 7-bit correlation, complete product on a single CCQ (four sub-products, each uses one CCC). Get baselines for the first station in Y input and all the stations in X input. Use one CCQ per baseline. Note: If more than 4 CCCs are needed, we might check the number of stations in the Y input, and use more than one CCQ per Baseline, if possbile.
st4Rq7CfgAutoCorrOnly(PolarizationProduct, SubProductType, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Deprecated. 4 stations per row/column, 7-bit correlation, complete product on a single CCQ (four sub-products, each uses one CCC). Used for autoCorr=allStationsMaxProd to configure auto-correlation products for a CorrChips on the diagonal that are used for auto-correlation products only. Half of the auto-corr products are produced as for "allProductsHalfStations", to get the other half we must use additional rows/columns which produce auto-corr products only.
st4Rq7CfgBlb1Diagonal(PolarizationProduct, SubProductType, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Deprecated. 4 stations per row/column, 7-bit correlation, complete product on a single CCQ (four sub-products, each uses one CCC). Get baselines for the first station in X input and for all the stations in y input. Use one CCQ per baseline. Note: If more than 4 CCCs are needed, we might check the number of stations in the Y input, and use more than one CCQ per Baseline, if possible.
st4Rq7CfgFirstXAllY(PolarizationProduct, SubProductType, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CorrChip
Deprecated. 4 stations per row/column, 7-bit correlation, complete product on a single CCQ (four sub-products, each uses one CCC). Get baselines for the first station in Y input and all the stations in X input. Use one CCQ per baseline. Note: If more than 4 CCCs are needed, we might check the number of stations in the Y input, and use more than one CCQ per Baseline, if possbile.
STANDBY_OFF - Static variable in class ca.nrc.widar.vciMapper.StbDumpTrig
 
STANDBY_ON - Static variable in class ca.nrc.widar.vciMapper.StbDumpTrig
 
start() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Start the VariableLED.
start() - Method in class edu.nrao.widar.gui.widget.VariableLed
Start the VariableLED.
START_ROW_CELL - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
startBlkY - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
startCorrelatorModel() - Method in class ca.nrc.widar.mccc.crm.Crm
Instantiates a Correlator Model to be used by the CRM Server
startDb(CrmDbInfo) - Static method in class ca.nrc.widar.mccc.crm.Crm
Instantiates the CRM Database server if it has not already happened.
startDiagQueue() - Static method in class ca.nrc.widar.mccc.crm.Crm
Starts the CrmDiagnosticQueue
startHttpServer() - Static method in class ca.nrc.widar.mccc.crm.Crm
Initializes the HTTP server to listen at the specified port number
startingWith(String) - Static method in class edu.nrao.widar.util.SystemProperties
Convenience method to return an java.util.ArrayList<String> of System Property names that begin with a specified String.
startLfr(int) - Static method in class ca.nrc.widar.mccc.crm.Crm
Starts the Lag Frame Receiver thread.
startLfrSocket(int) - Static method in class ca.nrc.widar.mccc.crm.Crm
Starts the Lag Frame Receiver Socket at the specified port
startLogWindow() - Static method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
startStream() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Starts the streamreader sending tables to the Diagnostic by setting the send flag to true
stateBg - Static variable in class ca.nrc.widar.mccc.crm.CrmState
 
stateChanged(ChangeEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
A StateChanged event handler
stateContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
Station - Class in ca.nrc.widar.vciMapper
Station consists of up to 4 Station Boards that recieve input from the same Antenna.
Station() - Constructor for class ca.nrc.widar.vciMapper.Station
Default constructor should be never used.
Station(int) - Constructor for class ca.nrc.widar.vciMapper.Station
Creates a station with no basebands.
StationBoard - Class in ca.nrc.widar.vciMapper
Class StationBoard

Board ID can not change.

StationBoard() - Constructor for class ca.nrc.widar.vciMapper.StationBoard
 
StationBoard(Mlid) - Constructor for class ca.nrc.widar.vciMapper.StationBoard
 
StationBoardStatus - Class in ca.nrc.widar.vciMapper
Class StationBoardStatus
StationBoardStatus(Mlid) - Constructor for class ca.nrc.widar.vciMapper.StationBoardStatus
 
StationRack - Class in ca.nrc.widar.vciMapper
Class Station Rack represents a physical entity (rack).
StationRack() - Constructor for class ca.nrc.widar.vciMapper.StationRack
 
StationRack(int) - Constructor for class ca.nrc.widar.vciMapper.StationRack
Rack type specifies which types of boards the rack contains, Board.Type.StationBoard or Board.Type.BaselineBoard.
stationsAsString(List<Station>) - Static method in class ca.nrc.widar.vciMapper.Station
 
STATUS - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
STATUS_ACCOV - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
STATUS_OVR - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
STATUS_XSYNC - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
STATUS_YSYNC - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReader
 
statusAccOv - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
statusAsString() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
statusAsString() - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
statusB31 - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
statusCheck() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrame
Returns a false if any of the 4 status bits are set
statusDescriptor - Variable in class ca.nrc.widar.vciMapper.Board
This can be used to save status of the component as reported by hardware.
statusDescriptor - Variable in class ca.nrc.widar.vciMapper.StationRack
Provides more details for the last configuration chnage attempt.
statusInputSwitch - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
statusIsOk - Variable in class edu.nrao.widar.util.DataReadyEvent
 
statusIsOk() - Method in class edu.nrao.widar.util.DataReadyEvent
Returns the status of the data associated with this event.
statusOvr - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
statusSyncErr - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
STB - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
STB_HST_DEFAULT_STAGE1_SB - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
STB_HST_N_STAGES - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
StbDataPath - Class in ca.nrc.widar.vciMapper
Station Board Data Path
StbDataPath() - Constructor for class ca.nrc.widar.vciMapper.StbDataPath
 
StbDataPath(Mlid, int) - Constructor for class ca.nrc.widar.vciMapper.StbDataPath
Constructor takes DataPath Id and sets the default values All FIR FILTERS are created by default.
stbDefault - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
StbDumpTrig - Class in ca.nrc.widar.vciMapper
Class StbDumpTrig

StbDumpTrig(int, boolean) - Constructor for class ca.nrc.widar.vciMapper.StbDumpTrig
Constructor used to create default DumpTrig
StbDumpTrig(int, PolProductGroup, boolean) - Constructor for class ca.nrc.widar.vciMapper.StbDumpTrig
Create DumpTrig for (group of) polarization products.
StbFilter - Class in ca.nrc.widar.vciMapper
Class StbFilter Station Board Filter
StbFilter() - Constructor for class ca.nrc.widar.vciMapper.StbFilter
 
StbFilter(Mlid, int, int) - Constructor for class ca.nrc.widar.vciMapper.StbFilter
 
stbFlushQueue - Static variable in class ca.nrc.widar.vciMapper.StationBoardStatus
 
stbFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
stbFpList - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
stbHstInstateUrl - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
stbHstPowerUrl - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
stbHstQstateUrl - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
stbHstTab - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
stbListRequest - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
stbMessagesBlocked - Static variable in class ca.nrc.widar.vciMapper.BoardStatus
 
stbObjFactory - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Object factory for StationBoard configuration messages.
StbOutputWafer - Class in ca.nrc.widar.vciMapper
Class StbOutputWafer
StbOutputWafer() - Constructor for class ca.nrc.widar.vciMapper.StbOutputWafer
Default constructor should be never used.
StbOutputWafer(Mlid, int) - Constructor for class ca.nrc.widar.vciMapper.StbOutputWafer
Create a Station Board Wafer.
stbReadCfgQueue - Static variable in class ca.nrc.widar.vciMapper.StationBoardStatus
 
stbStatusQuery - Static variable in class ca.nrc.widar.vciMapper.StationBoardStatus
 
StbWbcProduct - Class in ca.nrc.widar.vciMapper
Class StbWbcProduct WbcProduct for Station Board.
StbWbcProduct(int) - Constructor for class ca.nrc.widar.vciMapper.StbWbcProduct
When creating an instance of this class, user must specify all parameters.
STEPS - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
STEPS - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
stMaxPackCfgSegmentForAllProducts(ArrayList<PolarizationProduct>, AutoCorrAlgorithmType, int, int, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
stMaxPackSetRcOutput(String, int, int, int, int, Nibble, Nibble, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Set Recirculation Controller output for 4-bit correlation.
stnID - Variable in class ca.nrc.widar.mccc.crm.CrmStationBoard
 
stnList - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
stnListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
stnString - Variable in class ca.nrc.widar.mccc.crm.CrmStationBoard
 
stOnePerRowOneProdPerCorrChip(PolarizationProduct, PolarizationProduct, PolarizationProduct, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Can be used for single or multi segment products.
stop() - Method in class ca.nrc.widar.mccc.crm.VariableLed
Stop the VariableLED from running.
stop() - Method in class edu.nrao.widar.gui.widget.Sound
 
stop() - Method in class edu.nrao.widar.gui.widget.VariableLed
Stop the VariableLED from running.
stopListening() - Method in class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
 
stopListening() - Method in class ca.nrc.widar.vciMapper.ThreadCrmListener
 
stopQueue() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Method to cleanly exit the run loop of the CDQ
stopReceiver() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver
Method to cleanly exit the run loop of the LFR by setting 'collectingFrames' to false
stopStream() - Method in class ca.nrc.widar.mccc.crm.CrmStreamReader
Stops the streamreader sending tables to the diagnostic by setting the send flag to false
stOrderFor4bitCorr - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
Station order for Baseline Boards for 4 bit correlation.
stOrderFor7bitCorrStreamA - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
Station order for Baseline Boards for 4 bit correlation.
stOrderFor7bitCorrStreamB - Static variable in class ca.nrc.widar.vciMapper.BlbRecFpga
Station order for Baseline Boards for 4 bit correlation.
storeFilterCompXml(ObjectFactory) - Method in class ca.nrc.widar.mccc.crm.CrmStbHSComparable
This method is called from the diagnostic when data collection in a given configuration is complete.
stRackList - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
stRacks - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
stRacksToString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
STREAM - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
STREAM_TITLE - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
StreamViewer - Class in edu.nrao.widar.gui.widget
A GUI window that displays (in a Thread) an HTTP data stream from a remote server.
StreamViewer() - Constructor for class edu.nrao.widar.gui.widget.StreamViewer
 
StreamViewer(String, boolean) - Constructor for class edu.nrao.widar.gui.widget.StreamViewer
 
StreamViewer(String, Rectangle) - Constructor for class edu.nrao.widar.gui.widget.StreamViewer
 
StreamViewer(String, Rectangle, boolean) - Constructor for class edu.nrao.widar.gui.widget.StreamViewer
 
Subarray - Class in ca.nrc.widar.vciMapper
Subarray
Subarray(String, long, XMLGregorianCalendar) - Constructor for class ca.nrc.widar.vciMapper.Subarray
Creates an empty Subarray (no stations).
Subarray.CbeConfigStatus - Enum in ca.nrc.widar.vciMapper
 
SubarrayCbeConfig - Class in ca.nrc.widar.vciMapper
 
SubarrayCbeConfig() - Constructor for class ca.nrc.widar.vciMapper.SubarrayCbeConfig
Default constructor - not supported.
SubarrayCbeConfig(String, Subarray.CbeConfigStatus, long) - Constructor for class ca.nrc.widar.vciMapper.SubarrayCbeConfig
Constructor.
SubarrayDeconfig - Class in ca.nrc.widar.vciMapper
 
SubarrayDeconfig() - Constructor for class ca.nrc.widar.vciMapper.SubarrayDeconfig
Default constructor - not suported.
SubarrayDeconfig(String, Subarray.CbeConfigStatus) - Constructor for class ca.nrc.widar.vciMapper.SubarrayDeconfig
Constructor.
SubbandForSpectralWindow - Class in ca.nrc.widar.vciMapper
Class SubbandForSpectralWindow

Spectral window may consist of several subbands.

SubbandForSpectralWindow(int, SwBbType, int, PolarizationType, int, PolarizationType) - Constructor for class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
SubbandForSpectralWindow(int, SwBbType, int, PolarizationType) - Constructor for class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
SUBBANDS_PER_DATA_PATH - Static variable in class ca.nrc.widar.vciMapper.StbDataPath
 
subbandsAsHtmlTable(StringBuilder) - Method in class ca.nrc.widar.vciMapper.Subarray
Print list of Baseline Boards used for this Subarray
subBandsFile - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
submit(BlfFile, CrmDiagnostic) - Method in class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
Receives a request to analyze a BLF file from a Diagnostic and submits the request to the thread pool.
submit(List<BlfFile>, CrmDiagnostic) - Method in class ca.nrc.widar.mccc.crm.CrmBlfFileAnalyzer
Receives an ArrayList of requests to analyze BLF files from a Diagnostic and submits the entire list to the thread pool.
SUM_SAMPLE_WIDTH - Static variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
sumEnabled(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
sumEnabled() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
SummedArray - Class in ca.nrc.widar.vciMapper
Parameters used to produce, format and transmit phased sum of subarray.
SummedArray() - Constructor for class ca.nrc.widar.vciMapper.SummedArray
Default constructor should be never used.
SummedArray(String, boolean, int, PolarizationType, int, PolarizationType, int, int) - Constructor for class ca.nrc.widar.vciMapper.SummedArray
 
sumOfSubarray - Static variable in class ca.nrc.widar.vciMapper.BaselineBoard
 
sumProductSegment(int, int, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Set RC to get a product for the sum of the summedArray.
sumToCcArray(SummedArray, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
SW_PWR_INTEG - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
swIndexesCorrectlyAssigned(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
swIndexesCorrectlyAssigned(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
swIndexesCorrectlyAssigned(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
Switch - Class in edu.nrao.widar.gui.widget
A single pole, single throw circuit switch.
Switch(int, int) - Constructor for class edu.nrao.widar.gui.widget.Switch
Creates a new switch with the specified layout direction and 'on' direction.
syncCheck - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
syncDuration - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
SystemProperties - Class in edu.nrao.widar.util
General purpose utility class for working with the JVM's System Properites.
SystemProperties() - Constructor for class edu.nrao.widar.util.SystemProperties
 
systemTab - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 

T

tabHeight - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
table - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
tabPane - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
tabType - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
tag() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.BoardType
Returns the String tag of the enum value
TAG - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
tcEpoch - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
temperatures(String) - Static method in class edu.nrao.widar.util.Log
Log a set of temperatures.
test - Variable in class ca.nrc.widar.mccc.crm.CrmDiagnostic
 
TEST_DESCRIPTION - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
 
TEST_DESCRIPTION - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
 
TEST_DESCRIPTION - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
TEST_DESCRIPTION - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
TEST_DESCRIPTION - Static variable in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
 
TEST_ID - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
 
TEST_ID - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
 
TEST_ID - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
TEST_ID - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
TEST_ID - Static variable in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
 
testCallback(HttpLinkCallback, boolean, boolean, String) - Method in class edu.nrao.widar.util.HttpLink
A method for users of asynchronous comms to test their callback path.
testContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
TestHttpServer - Class in edu.nrao.widar.util
HTTP based communications link for testing EVLA WIDAR Correlator Software.
TestHttpServer(int) - Constructor for class edu.nrao.widar.util.TestHttpServer
 
testMode - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
testTab - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
TEXT - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
textString - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
thisSumEnabled(int, String, int, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
thisSumEnabled(String, int, int) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
ThreadConfigChangeListener - Class in ca.nrc.widar.vciMapper
Thread that listens for callbacks by HttpLink.
ThreadConfigChangeListener() - Constructor for class ca.nrc.widar.vciMapper.ThreadConfigChangeListener
Send command to all the boards (Station Boards and Baseline Boards).
ThreadCrmListener - Class in ca.nrc.widar.vciMapper
Class ThreadCrmListener
Implements a thread that listenes for callbacks by HttpClientLink for communications betweeen the Config Mapper & the Correlator Resource Manager (CRM).
This class is used to listen to replies from the CRM when a CRM Error Report has been requested.
ThreadCrmListener(CorrStatus) - Constructor for class ca.nrc.widar.vciMapper.ThreadCrmListener
 
throwableToString(Throwable) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
timeFormatMillis - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
timeFormatNoMillis - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
timeNotSpecified - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
TIMEOUT - Static variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
TIMEOUT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
TIMEOUT - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTestTab
 
title() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Return the title of this Baseband type
title() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.BoardType
Returns the String title of the enum value
title() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.Crate
Return the title for this Crate
title() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Return the title of the RackType
title() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.SwitchMode
Return the title for this SwitchMode
TITLE - Static variable in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
 
title - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
 
title - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
 
title - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTab
 
title - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
toElementList(NodeList) - Static method in class edu.nrao.widar.util.XmlUtil
Convenience method to convert a NodeList of Nodes into an ArrayList of Elements.
toggle() - Method in class edu.nrao.widar.gui.widget.Led
Toggle the Led.
toggle() - Method in class edu.nrao.widar.gui.widget.LedElement
Toggle the Led.
TOP_LEFT - Static variable in class edu.nrao.widar.gui.widget.HelpLabel
 
TOP_RIGHT - Static variable in class edu.nrao.widar.gui.widget.HelpLabel
 
topLabel() - Method in enum ca.nrc.widar.mccc.crm.CrmCommon.SwitchMode
Return the SwitchBoard label to be used at the top of the panel when this SwitchMode is active
toShortString() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
toString() - Method in class ca.nrc.widar.vciMapper.BasebandForSpectralWindow
 
toString() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
toString() - Method in class ca.nrc.widar.vciMapper.BaselineBoardStatus
 
toString() - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
toString() - Method in class ca.nrc.widar.vciMapper.BlbRcInputStream
 
toString() - Method in class ca.nrc.widar.vciMapper.BlbRcInternalStream
 
toString() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
toString() - Method in class ca.nrc.widar.vciMapper.Board
 
toString() - Method in class ca.nrc.widar.vciMapper.BoardStatus
 
toString() - Method in class ca.nrc.widar.vciMapper.CbeBdfShape
 
toString() - Method in class ca.nrc.widar.vciMapper.CcCell
 
toString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
toString() - Method in class ca.nrc.widar.vciMapper.Crate
 
toString() - Method in class ca.nrc.widar.vciMapper.LagChainSegment
 
toString() - Method in class ca.nrc.widar.vciMapper.Mlid
 
toString() - Method in class ca.nrc.widar.vciMapper.PolarizationProduct
 
toString() - Method in class ca.nrc.widar.vciMapper.PolProductGroup
 
toString() - Method in class ca.nrc.widar.vciMapper.ProductLagChain
 
toString() - Method in class ca.nrc.widar.vciMapper.Rack
 
toString() - Method in class ca.nrc.widar.vciMapper.SpectralWindow
 
toString() - Method in class ca.nrc.widar.vciMapper.Station
 
toString() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
toString() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
toString() - Method in class ca.nrc.widar.vciMapper.StationRack
 
toString() - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
toString() - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
toString() - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
toString() - Method in class ca.nrc.widar.vciMapper.Subarray
 
toString() - Method in class ca.nrc.widar.vciMapper.SubarrayCbeConfig
 
toString() - Method in class ca.nrc.widar.vciMapper.SubarrayDeconfig
 
toString() - Method in class ca.nrc.widar.vciMapper.SubbandForSpectralWindow
 
toString() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
toString(String) - Static method in class ca.nrc.widar.vciMapper.VciMapperHtml
 
toString() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
toString() - Method in class edu.nrao.widar.util.SnmpTrapManager.SnmpTrapEvent
 
toString(Node) - Static method in class edu.nrao.widar.util.XmlUtil
Return the String value of an org.w3c.dom.Node.
toString(Node, String) - Static method in class edu.nrao.widar.util.XmlUtil
 
toStringBuilder() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
toStringBuilder() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
toStringComplete() - Method in class ca.nrc.widar.vciMapper.Station
 
toStringNoDestination() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
toStringOneLine() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
toStringOnlyDestination() - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
toStringOnlySource() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
toStringXBarSwitch() - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
toTableForHomePage(StringBuilder, String, int[], BaselineBoard[][][]) - Method in class ca.nrc.widar.vciMapper.Subarray
Displays subarray as row in HTML table.
totalCount - Static variable in class edu.nrao.widar.gui.widget.LedSized
 
toXml() - Method in class edu.nrao.widar.gui.widget.AboutPanel
Write ourselves to XML
transmitException - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
trap(String) - Static method in class edu.nrao.widar.util.Log
Log an SNMP Trap
trimToInt(String) - Static method in class edu.nrao.widar.util.Num
Returns the numeric portion of a String as an int.
ts0 - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
ts1 - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
turnOff() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
Indicate to the BlfReceiver object that it should stop listening on the socket for lag frames from the diagnostic that is associated with this receiver.
turnOn() - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
Indicate to the BlfReceiver object that it should start listening on the socket for lag frames from the diagnostic that is associated with this receiver
twoSumsOneProduct(SummedArray, PolarizationProduct, int, int, int, int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
txtFormatter - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
TYPE - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnostic
 
TYPE - Static variable in class ca.nrc.widar.mccc.crm.CrmBlbHSDiagnosticAnalyzer
 
type - Variable in class ca.nrc.widar.mccc.crm.CrmBoard
 
TYPE - Static variable in class ca.nrc.widar.mccc.crm.CrmCSDDiagnostic
 
type - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
 
type - Variable in class ca.nrc.widar.mccc.crm.CrmQuery
 
type - Variable in class ca.nrc.widar.mccc.crm.CrmRack
 
TYPE - Static variable in class ca.nrc.widar.mccc.crm.CrmStbHSDiagnostic
 
TYPE - Static variable in class ca.nrc.widar.mccc.crm.CrmTestDiagnostic
 
type - Variable in class ca.nrc.widar.vciMapper.Board
 
type - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
typeListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 

U

ucLabel() - Method in enum ca.nrc.widar.mccc.crm.CrmLog.ErrorLevel
 
UNKNOWN - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
unmarshalCmStatusQuery(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
unmarshalComponent(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
unmarshalCrmXml(String) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
unmarshalVciRequest(InputStream) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
unmarshalVciRequest(File) - Static method in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
UP - Static variable in class edu.nrao.widar.gui.widget.Switch
 
update(List<FrontPanel>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Supplied with a list of FrontPanel JAXB Objects, this method updates the Component list kept by the class, and then calls the update method which refreshes the display panels for rack, crate and component based upon the results of the update.
update() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
Refresh the display panels within the selector for rack, crate and component based upon the values stored within the class (which have been recently updated by the time this method is called)
update(String) - Method in class edu.nrao.widar.gui.widget.StreamViewer
 
update(String) - Method in class edu.nrao.widar.util.HttpClientLink.HttpClientLinkWindow
 
update(String) - Method in class edu.nrao.widar.util.HttpLink.HttpLinkWindow
 
updateActionDisplay(String) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Updates the action display panel with the supplied text message
updateBlbComponentList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
updateBlbHstConfigFileList(ArrayList<CrmFile>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
updateBlbHstConfigFileList(ArrayList<CrmFile>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
updateBlbHstConfigFileList(ArrayList<CrmFile>) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
 
updateBlbXmlConfigList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
updateCcErrorThreshold(double) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Updates all components associated with the Lag Comparison Threshold with the supplied value
updateCcErrorThreshold() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Updates the Lag Comparison Threshold display elements
updateComponentList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
updateConcurrentDiagSettingMenuItem(JMenuItem, int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Replaces the string within the indicated menu item for concurrent diagnostic setting with the supplied value
updateCondition(DiagConditionType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Updates the current condition of the diagnostic result
updateConfig(int) - Method in class ca.nrc.widar.mccc.crm.CrmCorrelatorModel
A method called via an external source which prompts the CorrelatorModel to re-initialize itself using the specified mode
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus, String) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
Same as configChangeStatusDeepChange for configChange=true and configChangeStatus ToBeTransmitted or CommFailure Used to when transmitting (or re-transmitting) BaselineBoard configuration.
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcCell
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CcQuad
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.CorrChip
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus, String) - Method in class ca.nrc.widar.vciMapper.StationBoard
Same as configChangeStatusDeepChange for configChange=true and configChangeStatus ToBeTransmitted or CommFailure Used to when transmitting (or re-transmitting) StationBoard configuration.
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDataPath
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
updateConfigChangeStatusForToBeTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
updateConfigChangeStatusForTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbDumpTrig
 
updateConfigChangeStatusForTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbFilter
 
updateConfigChangeStatusForTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbOutputWafer
 
updateConfigChangeStatusForTransmitted(ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.StbWbcProduct
 
updateConsoleMode(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Updates all components associated with Console display mode
updateConsoleXmlMode(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
updateControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Method used to update the LED values for common LED objects within the CrmGuiTab
updateControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Updates the control indicators of this tab based on CrmGui menu settings.
updateControl() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
Updates the control indicators of this tab based on CrmGui menu settings.
updateCrmIssue(CrmIssue) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDbTableModel
Replaces the CrmIssue XML object stored within the model with the supplied CrmIssue XML object with the same ID, then fires a table changed event so that the table is updated with the new information.
updateCrmModel() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Sends a request to the CrmCorrelatorModel Class in order to obtain an updated correlator model reflecting the current state of the correlator system.
updateDebugMode(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Updates all components associated with Debug Mode
updateDiagnostic(Diagnostic) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
On receipt of a Diagnostic XML object, usually indicating the completion of a diagnostic, this method updates the appropriate tab with the supplied information
updateDiagnostic(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Replaces the Diagnostic XML object stored within the model with the supplied Diagnostic XML object with the same ID, then fires a table changed event so that the table is updated with the new information.
updateDiagnostic(Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Calls a CrmGuiDiagTableModel method which replaces the existing Diagnostic XML stored within the tab with the provided Diagnostic XML
updateDiagnosticComponentLocation(String, int, int, int, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
This is a temporary (?) method used in cases where testing requires the CRM default to a specific component for testing, and allows the diagnostic in question to update the information within the Diagnostic element stored within the Queue so that the downstream CRMGui clients see updated information rather than false information.
updateDiagnosticStatus(DiagStatus) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
On receipt of a DiagStatus XML object, this method updates the appropriate tab with the supplied information
updateDiagnosticStatus(DiagStatus) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Updates the DiagStatus XML object with the appropriate Diagnostic XMl stored in the model with the supplied DiagStatus XML object, then fires a tableDataCHanged event.
updateDiagnosticStatus(DiagStatus, Diagnostic) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiDiagTableModel
Updates the DiagStatus XMl object with the appropriate Diagnostic XML stored in the model with the supplied DiagSTatus XML object, then fires a tableDataChanged event.
updateDiagnosticStatus(DiagStatus) - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
Calls a CrmGuiDiagTableModel method which replaces the DiagStatus child of the Diagnostic XML within the tab with the supplied DiagStatus XML object.
updateDiagResult(Result) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Update the Result of a diagnostic by entering the Result XML object into the diagResults hashmap.
updateDiagStatus(DiagStatus) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnosticQueue2
Update the status of a running diagnostic by supplying a DiagStatus XML element.
updateExcludeList(String) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
Removes the supplied diagnostic ID to the list of diagnostics that should be excluded from status query
updateFromCurrentModel() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
updateFromXml(String) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Refreshes the screen from a specified String of XML.
updateHardwareFromScreen() - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
Implements the menu item "Write to this Device".
updateHardwareFromScreen() - Method in class edu.nrao.widar.gui.widget.MainFrame
Deprecated. When the associated MenuItem is selected this method (which must be overridded by the sub-class) is called in the sub-class.
updateMemConsoleMode(boolean) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Updates all components associated with Memory/Usage Console display mode
updateMessage(String, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Updates the current messages associated with the diagnostic progress, both brief and long versions
updateMultipleHardwareFromScreen() - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
Implements the menu item "Write To Multiple Device".
updateOutputConfig() - Method in class ca.nrc.widar.mccc.crm.CrmStationBoard
Obtains the Outputs XML from the board and updates the integer array on board this object to reflect the status of the output chip configuration.
updateProgress(Double) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Updates the current progress value with the supplied double value
updateProgress(int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Updates the current progress value with the supplied int value
updateProgress(int, String, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Updates the current progress value, along with a new progress state message (both brief and long)
updateQueueStatus() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Assembles a status xml element using the getDiagStatusXml method, and calls the method within the CrmDiagnosticQueue which updates the DiagStatus list.
updateResult() - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Assembles a DiagResult xml element using the getDiagResultXml method, and calls the method within the CrmDiagnosticQueue which updates the DiagResult list.
updateRxpSyncTimeout(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Updates all components associated with the Rxp Sync Timeout with the supplied value
updateScreenFromHardware() - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
Implements the menu item "Read From Hardware".
updateScreenFromHardware() - Method in class edu.nrao.widar.gui.widget.MainFrame
Deprecated. When the associated MenuItem is selected this method (which must be overridded by the sub-class) is called in the sub-class.
updateScreenFromXmlText(String) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
Used by menu item "Read From File".
updateScreenFromXmlText(String) - Method in class edu.nrao.widar.gui.widget.MainFrame
Deprecated. When the associated MenuItem is selected this method (which must be overridded by the sub-class) is called in the sub-class.
updateSelector() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
updateSelector() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
 
updateSelector() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabStbHst
 
updateSelector() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabSystem
Updates the control indicators of this tab based on CrmGui menu settings.
updateState(DiagStateType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Updates the current state of the diagnostic
updateStatus(Object, String, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Convenience method which updates the overall status elements of this diagnostic, without updating the State and Condition of the diagnostic
updateStatus(Object, String, String, DiagStateType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Convenience method which updates the overall status elements of this diagnostic, without updating the Condition of the diagnostic
updateStatus(Object, String, String, DiagStateType, DiagConditionType) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
Method which updates the overall status elements of this diagnostic
updateStatus(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.StationBoard
 
updateStbComponentList() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
updateStbStatus(ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.Station
 
updateSyncCheck(int) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Updates all components associated with the Sync Check/Blanking interval with the supplied value
updateTabs() - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
Forces a call to all sub-tabs to provoke an update of components within the tabs based on stored variables
updateTotalDuration() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTab
 
updateTotalDuration() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTabBlbHst
Updates the Total Diagnostic Duration display elements based on the settings of the various contributing control elements
UPPER - Static variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
Baseline Board has two RXP chips: 0 and 1 RXP 0 is the upper RXP (on the board).
UPPER_CRATE_ID - Static variable in class ca.nrc.widar.vciMapper.Crate
 
url - Variable in class ca.nrc.widar.vciMapper.BoardStatus
 
urlEncode(String) - Static method in class edu.nrao.widar.util.HttpClientLink
Return a URL string with reserverd characters in the query portion properly escaped.
urlEncode(String) - Static method in class edu.nrao.widar.util.HttpLink
Return a URL string with reserverd characters in the query portion properly escaped.
urlString - Variable in class edu.nrao.widar.gui.widget.StreamViewer
 
urlString - Variable in class edu.nrao.widar.util.HttpLinkCallback
That was used for this communication.
useBaselineDumpTrig() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
usedFor(String) - Method in class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
 
usedForAutoCorr() - Method in class ca.nrc.widar.vciMapper.CcQuad
 
usedForAutoCorrAb() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForAutoCorrMode() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForAutoCorrOnly() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
If true, only auto-correlation products should be configured for this row/column.
usedForAutoCorrOnly(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForBaselines() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForBaselines(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForBaselinesAndAutoCorrs() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForBaselinesAndAutoCorrs(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForBaselinesOrMixed() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForConfigId(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForConfigIdAndMode(String, BlbRecFpga.RcUseMode) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForRegProducts(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
Deprecated. not used - could be deleted
usedForSumAutoCorr() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForSumAutoCorr() - Method in class ca.nrc.widar.vciMapper.CorrChip
 
usedForXCross(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForXCross() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForYCross(String) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
usedForYCross() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
useInputWaferForAutoCorrOnly(int, boolean) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
useModeAutoCorrAbOneInputStation(int, ArrayList<LogRecord>) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
This method is used when setting RCs on the 2nd Baseline Board in a pair.
useModeAutoCorrAbOneInputStation() - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
stationPacking=onePerRow and autoCorr=AllStationsMaxProd RC that used to get auto-corr.product A*B are set useMode=AutoCorrAb1 (one the first BLB) and useMode=AutoCorrAb2 (on the 2nd BLB).
useRowColumnSeven(SummedArray, int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
useStatus - Variable in class ca.nrc.widar.vciMapper.Board
Usage status Station Board that belongs to a station can be either idle or used.
useThisDumpTrig(StbDumpTrig) - Method in class ca.nrc.widar.vciMapper.PolProductGroup
Check if an existing DUMPTRIG can be used for this subband (ppg).
useThisDumpTrig(StbDumpTrig) - Method in class ca.nrc.widar.vciMapper.SummedArray
Check if an existing DUMPTRIG can be used for this subband (ppg).
UTC - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
Util - Class in edu.nrao.widar.gui.widget
A set of utility and convenience methods to aid in WIDAR GUI development.
Util() - Constructor for class edu.nrao.widar.gui.widget.Util
 

V

validate() - Method in class ca.nrc.widar.mccc.crmGui.CrmGuiTable.CrmGuiTableHeaderRenderer
These methods are overridden for efficiency
validResponse - Variable in class edu.nrao.widar.util.HttpLinkCallback
True if server responded else false.
valueChanged(ListSelectionEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFile
 
valueChanged(ListSelectionEvent) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
 
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.Crm.CorrMode
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.Crm.CrmMode
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.BoardType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.Crate
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.SignalPath
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.SwitchMode
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.mccc.crm.CrmLog.ErrorLevel
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BaselineBoard.Side
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BaselineBoard.St1PpOnDiagonal
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BaselineBoard.WaferSet
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BlbDataStream.SampleSize
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BlbLtaFpga.BurstModeControl
Deprecated. Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BlbRcInternalStream.SampleSize
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BlbRecFpga.OutputSource
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.BlbRecFpga.RcUseMode
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.Board.Type
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.CcCell.Source
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.CcQuad.Source
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.CorrChip.BurstModeControl
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.CorrModel.CorrModelCfgStatus
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.Subarray.CbeConfigStatus
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.VciConfigMapperCommon.IpAddressVersion
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.VciConfigMapperCommon.StbOutputSampleSize
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum ca.nrc.widar.vciMapper.VciConfigMapperPanel.GuiBoardFunction
Returns the enum constant of this type with the specified name.
values() - Static method in enum ca.nrc.widar.mccc.crm.Crm.CorrMode
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.Crm.CrmMode
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.Baseband
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.BoardType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.Crate
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.RackType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.SignalPath
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.CrmCommon.SwitchMode
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.mccc.crm.CrmLog.ErrorLevel
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BaselineBoard.Side
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BaselineBoard.St1PpOnDiagonal
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BaselineBoard.WaferSet
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BlbDataStream.SampleSize
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BlbLtaFpga.BurstModeControl
Deprecated. Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BlbRcInternalStream.SampleSize
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BlbRecFpga.OutputSource
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.BlbRecFpga.RcUseMode
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.Board.Type
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.CcCell.Source
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.CcQuad.Source
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.CorrChip.BurstModeControl
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.CorrModel.CorrModelCfgStatus
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.Subarray.CbeConfigStatus
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.VciConfigMapperCommon.IpAddressVersion
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.VciConfigMapperCommon.StbOutputSampleSize
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum ca.nrc.widar.vciMapper.VciConfigMapperPanel.GuiBoardFunction
Returns an array containing the constants of this enum type, in the order they are declared.
values - Variable in class edu.nrao.widar.util.SnmpUtil.SnmpMessage
 
valuesForNamesStartingWith(String) - Static method in class edu.nrao.widar.util.SystemProperties
Convenience method to return a String[] of property values whose property names start with a specified value.
VariableLed - Class in ca.nrc.widar.mccc.crm
WIDAR/EVLA - VariableLed Class
VariableLed(Color) - Constructor for class ca.nrc.widar.mccc.crm.VariableLed
Constructor for the Variable LED that places the LED in SOLID mode by default.
VariableLed(Color, int, Long) - Constructor for class ca.nrc.widar.mccc.crm.VariableLed
Constructor for the Variable LED that places the LED in the mode specified by the user, at the specified interval.
VariableLed(Color, int, int) - Constructor for class ca.nrc.widar.mccc.crm.VariableLed
Constructor for the Variable LED that places the LED in SOLID mode by default.
VariableLed(Color, int, Long, int, int) - Constructor for class ca.nrc.widar.mccc.crm.VariableLed
Constructor for the Variable LED that places the LED in the mode specified by the user, at the specified interval.
VariableLed - Class in edu.nrao.widar.gui.widget
WIDAR/EVLA - VariableLed Class
VariableLed(Color) - Constructor for class edu.nrao.widar.gui.widget.VariableLed
Constructor for the Variable LED that places the LED in SOLID mode by default.
VariableLed(Color, int, Long) - Constructor for class edu.nrao.widar.gui.widget.VariableLed
Constructor for the Variable LED that places the LED in the mode specified by the user, at the specified interval.
VariableLed(Color, int, int) - Constructor for class edu.nrao.widar.gui.widget.VariableLed
Constructor for the Variable LED that places the LED in SOLID mode by default.
VariableLed(Color, int, Long, int, int) - Constructor for class edu.nrao.widar.gui.widget.VariableLed
Constructor for the Variable LED that places the LED in the mode specified by the user, at the specified interval.
VCI_CONFIGURATION_TIME - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
vciAlertActive - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Alert active indicator.
vciAlertActive() - Static method in class ca.nrc.widar.vciMapper.VciConfigMapper
 
VciConfigMapper - Class in ca.nrc.widar.vciMapper
Class VciConfigMapper parses received vciRequests, derives Station Board and Baseline Board configuration, and generates vciResponses.
VciConfigMapper() - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapper
Default constructor.
VciConfigMapper(String) - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapper
Constructor.
VciConfigMapper(String, int) - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapper
Constructor.
VciConfigMapper(String, int, String, String) - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapper
Constructor.
vciConfigMapperCommon - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
VciConfigMapperCommon - Class in ca.nrc.widar.vciMapper
VCI Configuration Mapper - Common definitions, constants, variables and methods.
VciConfigMapperCommon() - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
VciConfigMapperCommon.IpAddressVersion - Enum in ca.nrc.widar.vciMapper
 
VciConfigMapperCommon.StbOutputSampleSize - Enum in ca.nrc.widar.vciMapper
Sample size for Station Board re-quantizer.
vciConfigMapperGlobals - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
VciConfigMapperGlobals - Class in ca.nrc.widar.vciMapper
This class defines global fields and methods.
VciConfigMapperGlobals() - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
VciConfigMapperGui - Class in ca.nrc.widar.vciMapper
Graphical User Interface for VCI Configuration Mapper.
VciConfigMapperGui(VciConfigMapper) - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapperGui
 
VciConfigMapperLogPanel - Class in ca.nrc.widar.vciMapper
Log panel for the VciMapperGui.
VciConfigMapperLogPanel(VciConfigMapper) - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapperLogPanel
 
VciConfigMapperPanel - Class in ca.nrc.widar.vciMapper
Class initially created by Igor Malis.
VciConfigMapperPanel(VciConfigMapper, int, int) - Constructor for class ca.nrc.widar.vciMapper.VciConfigMapperPanel
 
VciConfigMapperPanel.GuiBoardFunction - Enum in ca.nrc.widar.vciMapper
 
VciHttpServer - Class in ca.nrc.widar.vciMapper
Class VciHttpServer

Add received VCI messages to the ConfigurationQueue.

VciHttpServer(int) - Constructor for class ca.nrc.widar.vciMapper.VciHttpServer
 
vciInputQueue - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
Object Configuration Queue implements configuration queue and methods used to update the queue.
vciLatestVersion - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
VciMapperHtml - Class in ca.nrc.widar.vciMapper
HTML Representation of the WIDAR VCI Mapper.
VciMapperHtml() - Constructor for class ca.nrc.widar.vciMapper.VciMapperHtml
 
VciMapperLogFormatter - Class in ca.nrc.widar.vciMapper
Feb.
VciMapperLogFormatter() - Constructor for class ca.nrc.widar.vciMapper.VciMapperLogFormatter
 
VciMapperLogWindow - Class in ca.nrc.widar.vciMapper
 
VciMapperLogWindow() - Constructor for class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
vciMarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
VciMessageHandler - Class in ca.nrc.widar.vciMapper
HttpServer Handler for VCI messages.
VciMessageHandler() - Constructor for class ca.nrc.widar.vciMapper.VciMessageHandler
 
vciObjFactory - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
Object factory for VCI configuration messages.
vciRequestSchemaLocation - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
vciResponseSchemaLocation - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
vciSchemaValidationEnabled - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
vciUnmarshaller - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
vdifBlbAssigned() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
vdifBlbUsed(int, int, int) - Method in class ca.nrc.widar.vciMapper.SummedArray
 
vdifChangeToBeTransmitted() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
vdifConfigChange() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
vdifConfigChangeStatusDeepChange(boolean, ConfigChangeStatus, ConfigChangeStatus) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
vdifConfiguration() - Method in class ca.nrc.widar.vciMapper.SummedArray
 
vdifConfigured() - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
vdifConfigured(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
vdifConfigured() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
vdifEnabled(int) - Method in class ca.nrc.widar.vciMapper.BaselineBoard
 
vdifEnabled() - Method in class ca.nrc.widar.vciMapper.BlbRxpFpga
 
verbose - Variable in class ca.nrc.widar.mccc.crm.CrmBLFFile
 
verbose - Variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
verifyCmibHost(String) - Static method in class ca.nrc.widar.mccc.crm.CrmComm
Supplied with a String hostname, this method attempts to verify the existence of a CMIB hostname by sending a generic SUPERVISOR XML request.
verifyHost(String) - Static method in class ca.nrc.widar.mccc.crm.CrmComm
Supplied with a String hostname, this method attempts to verify the existence of the hostname via the 'isReachable' test with a 5 second timeout.
verifyHost(String) - Static method in class ca.nrc.widar.mccc.crmGui.CrmGui
A method which tests the validity of the supplied hostname
verifyIds(String, int, int) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 
verifyIds(BlbDataStream) - Method in class ca.nrc.widar.vciMapper.BlbDataStream
 

W

W - Static variable in class edu.nrao.widar.gui.widget.Sandbox
 
W - Static variable in class edu.nrao.widar.gui.widget.Sandbox2
 
waferNotUsed(String, int) - Method in class ca.nrc.widar.vciMapper.BlbRecFpga
 
warning(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_WARNING' status
warning(String) - Static method in class edu.nrao.widar.util.Log
Log a WARNING message.
WARNING_MESSAGE - Static variable in class edu.nrao.widar.gui.widget.Util
 
wasInterrupted(int) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A convenience method to call the wasInterrupted checking method without supplying a String message
wasInterrupted(int, String) - Method in class ca.nrc.widar.mccc.crm.CrmDiagnostic
A method that initiates cleanup actions when an interrupt is detected within a diagnostic
WBC_PRODUCT_MAX_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
WBC_PRODUCT_MIN_ID - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
WBC_PRODUCTS_PER_ST_BOARD - Static variable in class ca.nrc.widar.vciMapper.StationBoard
 
wbcAdminStatusAsString() - Method in class ca.nrc.widar.vciMapper.StationBoardStatus
 
wDefault - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
wFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
WIDAR_PROPERTIES_URL - Static variable in class edu.nrao.widar.util.SystemProperties
 
widarBroadcast(String, String, String) - Static method in class edu.nrao.widar.util.Log
Send a WIDAR multicast 'broadcast' message.
WIDTH - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiBlbHstAnalyze
 
WIDTH - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
 
WIDTH - Variable in class edu.nrao.widar.gui.widget.AboutPanel
Our height and width in pixels is made public to aid in placement in GUI panels.
WIDTH - Static variable in class edu.nrao.widar.gui.widget.Clock
The width and height in pixels are publically available to aid implementers with screen placement.
WIDTH - Static variable in class edu.nrao.widar.gui.widget.FanTachometer
 
WIDTH - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
width - Variable in class edu.nrao.widar.gui.widget.LedSized
 
WIDTH - Static variable in class edu.nrao.widar.gui.widget.McbRegisterPanel
The width and height in pixels are publically available to aid implementers with screen placement.
WIDTH - Static variable in class edu.nrao.widar.gui.widget.OldServerPanel
The width and height in pixels are publically available to aid implementers with screen placement.
WIDTH - Variable in class edu.nrao.widar.gui.widget.PixelGrid
 
WIDTH - Variable in class edu.nrao.widar.gui.widget.PixelGrid2
 
WIDTH - Static variable in class edu.nrao.widar.gui.widget.RefreshPanel
The width and height in pixels are publically available to aid implementers with screen placement.
WIDTH - Static variable in class edu.nrao.widar.gui.widget.RegisterSetBrowserPanel
The width and height in pixels are publically available to aid implementers with screen placement.
WIDTH - Static variable in class edu.nrao.widar.gui.widget.ServerPanel
The width and height in pixels are publically available to aid implementers with screen placement.
WIDTH - Static variable in class edu.nrao.widar.gui.widget.SingleMcbRegisterPanel
The width and height in pixels are publically available to aid implementers with screen placement.
WIDTH - Static variable in class edu.nrao.widar.gui.widget.SingleRegisterPanel
The width and height in pixels are publically available to aid implementers with screen placement.
window - Static variable in class edu.nrao.widar.util.HttpClientLink
 
window - Static variable in class edu.nrao.widar.util.HttpLink
 
windowActivated(WindowEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
windowActivated(WindowEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
windowActivated(WindowEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
windowActivated(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowClosed(WindowEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
windowClosed(WindowEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
windowClosed(WindowEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
windowClosed(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowClosing(WindowEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
windowClosing(WindowEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
windowClosing(WindowEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
windowClosing(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowDeactivated(WindowEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
windowDeactivated(WindowEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
windowDeactivated(WindowEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
windowDeactivated(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowDeiconified(WindowEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
windowDeiconified(WindowEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
windowDeiconified(WindowEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
windowDeiconified(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowGainedFocus(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowIconified(WindowEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
windowIconified(WindowEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
windowIconified(WindowEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
windowIconified(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowLostFocus(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowOpened(WindowEvent) - Method in class ca.nrc.widar.mccc.crmGui.CrmGui
 
windowOpened(WindowEvent) - Method in class ca.nrc.widar.vciMapper.VciMapperLogWindow
 
windowOpened(WindowEvent) - Method in class edu.nrao.widar.gui.widget.LogPane
 
windowOpened(WindowEvent) - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
 
windowTitle - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
withAValueOf(String) - Static method in class edu.nrao.widar.util.SystemProperties
Convenience method to return an String[]} of System Property names having a specified value.
wLogPanel - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperLogPanel
 
WORD_SIZE - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
write(String, String) - Static method in class edu.nrao.widar.gui.widget.FileChooser
Writes a String to a specified file.
write(String, String, boolean) - Static method in class edu.nrao.widar.gui.widget.FileChooser
Writes or appends a String to a specified file.
write(String, String, String) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Convenience method to write the specified contents to a file on the remote server.
write(String, String) - Method in class edu.nrao.widar.util.RemoteFileHandler
 
write(InputStream, String, boolean) - Method in class edu.nrao.widar.util.RemoteFileHandler
 
WriteField - Class in edu.nrao.widar.gui.widget
A writeable JTextField with certain presets to give it a default 'look and feel' for the WIDAR GUIs.
WriteField() - Constructor for class edu.nrao.widar.gui.widget.WriteField
Creates a new blank WriteField with CENTER alignment.
WriteField(String) - Constructor for class edu.nrao.widar.gui.widget.WriteField
Creates a new WriteField containing text and set to CENTER alignment
WriteField(int) - Constructor for class edu.nrao.widar.gui.widget.WriteField
Creates a new blank WriteField with specified text alignment
WriteField(String, int) - Constructor for class edu.nrao.widar.gui.widget.WriteField
Creates a new WriteField with specified alignment and text.
writeFile(String, String) - Method in class edu.nrao.widar.gui.widget.RemoteFile
Writes a specified String to a specified file on the remote server.
writeFile(String, String, boolean) - Method in class edu.nrao.widar.gui.widget.RemoteFile
Writes or appends a specified String to a specified file on the remote server.
writeFile(String, String, String, boolean) - Static method in class edu.nrao.widar.gui.widget.RemoteFile
Writes or appends a specified String to a specified file on the remote server.
writeFile(String, String) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Writes a specified String to a specified file on the remote server.
writeFile(String, String, boolean) - Method in class edu.nrao.widar.gui.widget.RemoteFileChooser
Writes or appends a specified String to a specified file on the remote server.
writePacket(DatagramPacket) - Method in class ca.nrc.widar.mccc.crm.CrmLagFrameReceiver.BlfReceiver
Receives a DatagramePacket object from the CrmLagFrameReceiver that is to be written to the current file open to this BlfReceiver
writeRegisters(int) - Method in class edu.nrao.widar.gui.widget.RawRegistersPanel
Write the values of the specified registers in this screen to the hardware device to which it is associated.
writeScreenToXmlText() - Method in class edu.nrao.widar.gui.widget.MainFpgaFrame
Used by menu item "Write To File".
writeScreenToXmlText() - Method in class edu.nrao.widar.gui.widget.MainFrame
Deprecated. When the associated MenuItem is selected this method (which must be overridded by the sub-class) is called in the sub-class.
WT - Variable in class ca.nrc.widar.mccc.crm.CrmBLFFile
 

X

X - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
X - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
X - Static variable in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
xAlertActive - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
xAlertClear - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapper
 
xAlertUnidentifiedBoard(String, String) - Static method in class ca.nrc.widar.vciMapper.BoardStatus
2011-11-16 SV Generate xAlert - board configuration failure

This method is used when the board is non existent or not identified.

xb - Variable in class ca.nrc.widar.mccc.crmGui.CrmGuiConnect
 
XBAR_BOARDS_IN_RACK - Static variable in class ca.nrc.widar.vciMapper.StationRack
 
XBAR_OUTPUT_PAIRS - Static variable in class ca.nrc.widar.vciMapper.BlbRxpFpga
Output of the RXP FPGA are 16 data stream pairs, which are input for 4 columns and four rows in the Correlator Chip matrix
XBAR_SWITCH_MAX_ID - Static variable in class ca.nrc.widar.vciMapper.StationRack
 
XBAR_SWITCH_MIN_ID - Static variable in class ca.nrc.widar.vciMapper.StationRack
 
XBAR_SWITCHES_IN_RACK - Static variable in class ca.nrc.widar.vciMapper.StationRack
 
XBarBoardOutputWafer - Class in ca.nrc.widar.vciMapper
Class XBarBoardOutputWafer An instance of this class represents a hardware component.
XBarBoardOutputWafer() - Constructor for class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
Default constructor should be never used.
XBarBoardOutputWafer(int, int, int, int) - Constructor for class ca.nrc.widar.vciMapper.XBarBoardOutputWafer
Create XBarBoardOutputWafer for the known Station Rack / Switch / Output
xBarBoardsInputToString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
xBarBoardsOutputToString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
xBarBoardsSetupToString() - Method in class ca.nrc.widar.vciMapper.CorrModel
 
xbbConfigChange() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
xbbConfigName() - Method in class ca.nrc.widar.vciMapper.StationBoard
 
xbboardListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
xbDefault - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
xbLFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
xbrackListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
xbslotListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
xbUFormat - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiOutput
 
xbwaferListValues - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
xmlConsole - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
xmlContext - Static variable in class ca.nrc.widar.mccc.crm.CrmCommon
 
xmlErr(String) - Static method in class ca.nrc.widar.mccc.crm.CrmLog
Logs the provided message with a 'LOG_ERR' status
XmlException - Exception in edu.nrao.widar.util
Signals that an error has occurred while processing XML.
XmlException(String) - Constructor for exception edu.nrao.widar.util.XmlException
Constructs an XmlUtilException with the specified detail message.
xmlGenException - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
xmlMonitorEnable - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGui
 
xmlTag - Static variable in class ca.nrc.widar.mccc.crmGui.CrmGuiCompSelector
 
XmlTest - Class in edu.nrao.widar.util
A class for testing the toString method of XmlUtil
XmlTest() - Constructor for class edu.nrao.widar.util.XmlTest
 
XmlUtil - Class in edu.nrao.widar.util
General purpose static convencience methods for working with XML.
XmlUtil() - Constructor for class edu.nrao.widar.util.XmlUtil
 
XmlUtilException - Exception in edu.nrao.widar.util
Thrown when an exception occurs during an XmlUtil operation.
XmlUtilException(String) - Constructor for exception edu.nrao.widar.util.XmlUtilException
Constructs an XmlUtilException with the specified detail message.
XSYNCERR_BIT - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 

Y

Y - Static variable in class ca.nrc.widar.mccc.crm.CrmBaselineBoard
 
Y - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 
Y - Static variable in class ca.nrc.widar.mccc.crm.CrmRecirculatorChip
 
YELLOW - Static variable in class ca.nrc.widar.mccc.crm.VariableLed
 
YELLOW - Static variable in class edu.nrao.widar.gui.widget.Led
 
YELLOW - Static variable in class edu.nrao.widar.gui.widget.LedElement
 
YELLOW - Static variable in class edu.nrao.widar.gui.widget.LedPath
 
YELLOW - Static variable in class edu.nrao.widar.gui.widget.VariableLed
 
YES - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperCommon
 
yes - Static variable in class ca.nrc.widar.vciMapper.VciConfigMapperGlobals
 
YSYNCERR_BIT - Static variable in class ca.nrc.widar.mccc.crm.CrmLagFrame
 

A B C D E F G H I K L M N O P Q R S T U V W X Y
NRAO/DRAO

National Radio Astronomy Observatory