!  Example sched input for a global VLBI observation.
!  This is for the legacy Mark5A system, not the new wideband
!  systems.  MARK5A recordings are no longer possible on the VLBA
!  this file needs to be updated.
!
!  VLA removed - no legacy capability and the setups violate
!  the constraints of the WIDAR phased array setup.  Nov. 1, 2012. RCW.
!
!  EB_VLBA changed to EFLSBERG Nov. 13, 2013.  RCW.  EB_VLBA has the
!  RDBE_DDC tuning constraints and this is an old systems schedule
!  with a .49 MHz tuning point.  The DBBC can do it.
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
 version = 1
 expt    = 'Global VLBI observations'
 expcode = ge001

 piname   = 'Craig Walker'    
 address1 = 'National Radio Astronomy Observatory'  
 address2 = 'P. O. Box O'                           
 address3 = 'Socorro, New Mexico, 87801'
 address4 = ' U.S.A. '
 phone    = '505 835 7247 '    
 obsphone = '505 835 7247 '     
 email    = 'cwalker@nrao.edu'  
 fax      = '505 835 7027 '   
 obsmode  = '6cm 128-4-2 '
 obstype  = VLBI
 note1    = ' ' 
! ==========================================================
! =================  Cover Letter  ====================
! ==========================================================
!
 coverlet /

Between the line that has 'coverlet' and '/' on it, and ending
with the line that has 'endcover' and a slash, you can put any
text you want.  The lines can be up to 256 characters long
but should be less than 80 to look reasonable in the output
files.  There is no restriction on the characters to use,
but just don't have both 'endcover' and a slash on the same line
until you are really done.  The space would be used for special
instructions to stations that are normally manned and is meant
to take the place of the separate files often provided by PI's.

 endcover /
!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl   = 'Socorro'
coravg   = 4
corchan  = 16
cornant  = 18
corpol   = 'on'
corwtfn  = 'uniform'
corsrcs  = 'standard'
cortape  = DAT
corship1 = 'Craig Walker'
corship2 = 'P. O. Box O'
corship3 = 'Socorro NM 87801'
!
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
!    Normally SCHED will not overwrite preexisting files. 
!    If you want this protection, comment this following line.
overwrit
!
! ==========================================================
! ======= Standard Source and Station Catalogs  ============
! ==========================================================
! Source catalogs sources.gsfc and sources.rfc.  
! This examples uses aliases only found in sources.gsfc.

stafile  = $SCHED/catalogs/stations.dat
srcfile  = $SCHED/catalogs/sources.gsfc
freqfile = $SCHED/catalogs/freq.dat

! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
setup = $SCHED/setups/v6cm-256-8-2-UL.set

year  = 1997
month = 3
day   = 5
start = 17:30:00
!
! ==========================================================
! ========================  The Scans  =====================
! ==========================================================

stations = vlba_sc, vlba_hn, vlba_nl, vlba_fd, vlba_la,
           vlba_pt, vlba_kp, vlba_ov, vlba_br, vlba_mk, 
           gbt_vlba, eflsberg, 
           jodrell2, wstrbork, onsala85, 
           medicina, torun, noto


!  Two passes per hour.  One tape is 14 passes.  Use one scan per pass.

 dur = 22:00   gap = 8:00
 source    = DA193       rep = 14   /

!  First tape change.
 gap = 15:00
 source    = 3C84        rep = 1   /
 gap = 8:00
 source    = DA193       rep = 13 / 

!  second tape change.
 gap = 15:00
 source    = 3C345       rep = 1   /
 gap 30
 source    = NRAO512     rep = 1   /
 gap = 4:00
 source    = DA193       rep = 10 / 
 source    = 3C273       rep = 2 /