! begin bl168b.key

! ================================================================
!   Preferred Dynamic Constraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]: 8
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                        d
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
! ================================================================
! ================== Cover information ===========================
! ================================================================
!
expt     = 'BL168B - Quasar SDSS J1536+0441A'
expcode  = 'BL168B'
version  = 1
piname   = 'J.M. Wrobel'
address1 = 'NRAO, 1003 Lopezville Rd.'
address2 = 'Socorro, NM 87801'
address3 = 'USA'
phone    = '575-835-7392 (work) or 575-835-3972 (home)'
obsphone = '575-835-7392 (work) or 575-835-3972 (home)'
fax      = ''
email    = 'jwrobel@nrao.edu'
obsmode  = ''
obstype  = 'VLBA'
correl   = 'VLBA'
note1    = 'Target SDSS quasar  : J1536A'
note2    = 'Phase calibrator    : J1539+0430'
note3    = 'Astro & coher check : J1544+0407'
note4    = 'Fringe finder, etc  : J1550+0527'
!
! ================================================================
! ================== Correlator information ======================
! ================================================================
!
correl   = 'Socorro'
coravg   =  2
corchan  = 16
cornant  = 10
corpol   = 'off'
corsrcs  = 'standard; use schedule catalog otherwise'
cortape  = 'ftp'
corship1 = 'Joan Wrobel'
corship2 = 'NRAO, 1003 Lopezville Road'
corship3 = 'Socorro, NM  87801'
!
! ================================================================
! ================== Control information =========================
! ================================================================
!
overwrit
! dosta 'vl'
!
! ================================================================
! ================== Source catalog ==============================
! ================================================================
!
srccat /
equinox=J2000  calcode=' '
source = 'J1536A'       remark = '2009, ApJ, 699, L22' 
    ra = 15:36:36.222   dec = 04:41:27.06 /
endcat /
!
! ================================================================
! ================== Standard source and station catalogs ========
! ================================================================
!
stafile  = '$SCHED/catalogs/stations.dat'
srcfile  = '$SCHED/catalogs/sources.vlba'
freqfile = '$SCHED/catalogs/freq.dat'
!
! ================================================================
! ================== Initial scan information ====================
! ================================================================
!

lst   = VLBA_PT
day   = 61846     ! 2009 October 1
start = 13:00:00

sumitem=el1, early
!
! ================================================================
! ================== The scans ===================================
! ================================================================
!
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup    = '$SCHED/setups/v4cm-256-8-2.set'

! schedule in 1h blocks with 3m switching time
! schedule 2m*18*5=3h on J1536A per 5h session
 
group = 2 rep 18
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1536A'     gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1544+0407' gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1550+0527' gap = 0 dur = 120 /
group = 2 rep 18
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1536A'     gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1544+0407' gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1550+0527' gap = 0 dur = 120 /
group = 2 rep 18
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1536A'     gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1544+0407' gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1550+0527' gap = 0 dur = 120 /
group = 2 rep 18
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1536A'     gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1544+0407' gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1550+0527' gap = 0 dur = 120 /
group = 2 rep 18
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1536A'     gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1544+0407' gap = 0 dur = 120 /
  source = 'J1539+0430' gap = 0 dur =  60 /
  source = 'J1550+0527' gap = 0 dur = 120 /

! end