#-----------------------------------------------------------------------------
# makedefs: Installation-specific definitions used by AIPS++ makefiles
#-----------------------------------------------------------------------------
#
#   Copyright (C) 1997,1998,1999,2000,2001,2003
#   Associated Universities, Inc. Washington DC, USA.
#
#   This program is free software; you can redistribute it and/or modify
#   it under the terms of the GNU General Public License as published by
#   the Free Software Foundation; either version 2 of the License, or
#   (at your option) any later version.
#
#   This program is distributed in the hope that it will be useful,
#   but WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#   GNU General Public License for more details.
#
#   You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
#   Correspondence concerning AIPS++ should be addressed as follows:
#          Internet email: aips2-request@nrao.edu.
#          Postal address: AIPS++ Project Office
#                          National Radio Astronomy Observatory
#                          520 Edgemont Road
#                          Charlottesville, VA 22903-2475 USA
#
#-----------------------------------------------------------------------------
# This GNU makefile is read in by the makedefs file in the directory above
# this.  That "default makedefs" file defines default values of each and
# every variable required by the AIPS++ makefiles.  Those default values are
# overridden where necessary by redefining them in this file.
#
# Installation instructions:
#
#    A template version of this file was copied from the "install/linux_gnu"
#    directory into the site-specific AIPS++ system directory for this
#    architecture (this directory) by the 'configure' script as part of the
#    AIPS++ installation.
#
#    While default definitions are made in the default makedefs file in the
#    directory above this, certain platform-specific redefinitions may have
#    been included here to help make the installation easier.
#
#    You must carefully check all of the definitions made in the default
#    makedefs file (as well as the redefinitions made here) and if necessary,
#    correct them by making an overriding definition (or correction) here.
#    However,
#
#                  DO NOT MODIFY THE DEFAULT MAKEDEFS FILE -
#
#                         MODIFY THIS FILE INSTEAD
#
#    Certain of the defaults in the default makedefs file are expressed in
#    terms of another default using "recursively expanded" variables (defined
#    with '=') rather than "simply expanded" (defined with ':=').  For
#    example the TeX variables are defined in terms of "TEXROOT".  This may
#    allow this makedefs file to redefine a whole set of variables, for
#    example all of the TeX variables, simply by redefining one, TEXROOT.
#    However,
#
#           ALWAYS USE "SIMPLY EXPANDED" VARIABLES WITHIN THIS FILE
#
#    That is, always use ":=" to make the assignments.
#
# Original: 1996/08/30 by Mark Calabretta, ATNF
# $Id: makedefs.template,v 19.2 2004/02/05 17:38:16 wyoung Exp $
#=============================================================================

#-----------------------------------------------------------------------------
# This file assumes you have a RedHat-7.2 system.

# AIPS++ DOES NOT COMPILE USING THE VERSION OF GCC (2.96) DISTRIBUTED
# WITH REDHAT-7.2 (even after the patches have been applied). To
# compile aips++ on a RedHat system you need to install
# gcc-2.95.3. This template assumes this has been done and the
# compiler was installed into /usr/local/gcc.  

# I got my version of gcc-2.95.3 by by compiling the source code (no
# problems in doing this, but you need to configure with the
# --enable-shared flag). Precompiled rpm's may also exist. Change the
# definition of C++ROOT to point to wherever you decide to install the
# compiler. The

# If you have a standard RedHat-7.2 installation ie., you installed
# from scratch using the workstation + development options, you will
# also need to install the following rpms (similar rpms may also
# work).

# lapack-3.0-12 (RedHat-7.2 Disk 2)
# blas-3.0-12  (RedHat-7.2 Disk 2)
# pgplot-5.2.0-8u (AIPS++ ftp)
# pgplot-devel-5.2.0-8u (AIPS++ ftp)
# pgplot-motif-5.2.0-8u (AIPS++ ftp)
# The location of these rpms is
# RedHat-7.2 Disk 2: The second disk of binary RPM's that come with RedHat-7.2
# AIPS++ ftp: These rpm's can be found on the aips++ anon-ftp site at
# ftp://aips2.nrao.edu/pub/versions/develop/import/Linux/RedHat/5.1/RPMS/i386
# Finally when installing pgplot-motif-5.2.0-8u you need to disable the
# dependency check using the --nodeps flag.
#-----------------------------------------------------------------------------

# General external libraries. 
#---------------------------- 

# X11.
X11ROOT := /usr/X11R6

# Motif (lesstif is fine).
#MotifROOT := $(X11ROOT)/LessTif/Motif2.1
MotifROOT := /usr

# XPM (X Pixmap) library
XPMROOT  := $(X11ROOT)

# TCL (version 7.6 or later).
TCLROOT  := /usr
TCLLIB   += -ldl

TKROOT   := /usr
TKINCD   := $(TKROOT)/include
TKLIBD   := $(TKROOT)/lib

# PGPLOT (FORTRAN plotting package).
PGPLOTROOT := /usr

# FFTW Highly optimized FFT routines
FFTWROOT := /usr
FFTWLIB := -lfftw3 -lrfftw

# cfitsio
CFITSIOROOT := /usr
CFITSIOINCD := $(CFITSIOROOT)/include/cfitsio
CFITSIOLIBD := $(CFITSIOROOT)/lib

# rpfits
RPFITSROOT := /usr

#TEXROOT
TEXROOT := /usr/share/texmf
TEXBINROOT := /usr/bin

LAPACKROOT := /usr

GLISHLOLIBD := /aips++/linux_gnu/lib

#-----------------------------------------------------------------------------
# Compilation and linkage variables
#-----------------------------------------------------------------------------
# The C++ compiler.
C++ROOT := /usr/local

# Preprocessor flags for system debug/optimized compilations.
CPPSTD   += -DAIPS_LINUX -DAIPS_LITTLE_ENDIAN -DAIPS_STDLIB -DAIPS_NO_LEA_MALLOC  -D_GLIBCPP_DEPRECATED -DAIPS_AUTO_STL

# C compiler flags for system debug/optimized compilations.
CC      := $(C++ROOT)/bin/gcc
CSTD    += -DHAVE_LINUX_GLIBC -Wall
COPTLVL := -O2 -fno-strength-reduce

# C++ compiler flags for system debug/optimized compilations.
C++       := $(C++ROOT)/bin/g++ -Wno-deprecated
C++STD    += -pipe -Wall -Wno-non-template-friend -Woverloaded-virtual  -Wcast-align -Wno-comment -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE


# FORTRAN compiler - using gcc (g77)
F77ROOT  := $(C++ROOT)
F77LIB := -lg2c
FC       := $(F77ROOT)/bin/g77
FCOPTLVL := -O2
FCOPT    += -fPIC

# Link flags for system debug/optimized compilations; these are passed to
# the C++ compiler.
LDSTD := -Xlinker -rpath -Xlinker $(AIPSARCH)/lib:$(C++ROOT)/lib:$(MotifLIBD):$(X11LIBD)

# Control table for building AIPS++ libraries.  Four keywords are recognized:
#    defeat:  The library will not be built (and if an old version exists it
#             will be deleted).
#    static:  The static library is built and is the one linked to.
#    shatic:  The static and shared libraries are built but the static library
#             is the one linked to.
#    shared:  The static and shared libraries are built and the shared library
#             is the one linked to.
#
#                    C++            C          FORTRAN
#                 dbg    opt    dbg    opt    dbg    opt
#               ------------- ------------- -------------
LIBnrao      := defeat static defeat defeat defeat defeat

# What consortium packages to build (atnf bima hia nfra nral nrao tifr).
CONSORTIA    += nrao

# Absolute pathname of perl-5 executable
PERL5 := /usr/bin/perl

# Unset this to defeat document compilation.
DOCSYS :=

# Unset this to defeat document extraction from C++ sources.
DOCEXTR :=