! w1_vddc_50cm.set
!
!  512 Mbps VLBA only recording using 2 polz, 4 freq channels, 
!      2 MHz bandwidth with 50cm receiver.  Uses DDC personality 
!      of 2 RDBEs to get all 8 subbands.  The 4 subband (pairs)
!      are adjacent in frequency.  No rx filter.  Some stations
!      have RFI that saturates the rx.  
!
! For this setup, have  
!      576.0 - 592.0 MHz
!      592.0 - 608.0 MHz
!      608.0 - 624.0 MHz
!      624.0 - 640.0 MHz
!
!      Note that freq.dat says max range for 50cm rx with no rxi
!      filter is 588 - 633 MHz.  Would have been best to center
!      the subbands in the center of this range (610.5 MHz), but 
!      that leads to the highest frequency subband 626.5 - 642.5 
!      MHz, which crosses the 640 MHz crossover boundary in the 
!      DDC. (No first L.O.)
!
!      Mark Claussen, 2021 April 30.
!
  nchan = 8
  bbfilt = 16.0
  pol = dual
  bits = 2
  freqref = 576.0
  dbe = rdbe_ddc
  netside = U
  lcp50cm = broad
  rcp50cm = broad
  freqoff =  0.0, 0.0, 16.0, 16.0, 32.0, 32.0, 48.0, 48.0
/