Loránt's wish-list for the OPT
(Some may already have been fixed/implemented)
Last modified on
2009 Jul 31
KEY:
unresolved or resolved [JIRA-#]
issue in OPT release (both only if known).
See also Dave's list.
-
Typo's and such
SCT - remove kinematic from LSR
[EVL-812] 0.6.0
SCT - File, Create New, .. move all image links to after brightness
[EVL-813] 0.6.0
SCT - motion polynomials must be in variable t, t^2, etc, and not x
[EVL-814] 0.6.0
SCT CATs - J2000 in equinox field
[EVL-815] 0.6.0
OPT - PB page arrays : choice may be a maximum of 3, with
these strings being valid: D=>A, A, A=>BNA, BNA, BNA=>B, B, B=>CNB,
CNB, CNB=>C, C, C=>DNC, DNC, DNC=>D, D
[EVL-810] 0.9.0
OPT - scan timing Sidereal and LST are the same (use Sidereal)
[EVL-816] 0.6.0
OPT - File, Create New, New .. remove "New" from Project, Scan,
Loop, Position etc (it is double)
[EVL-817] 0.6.0
OPT - rest frame Lsr must be LSR (upper case), remove non-used
[EVL-812] 0.6.0
-
-
General usability
ALL - Entering positions in HOR/AZ/GAL/ECL should not convert degrees to HMS
[EVL-819] 0.6.0
- ALL - Entering an exact six-digit (plus decimals) is sexagesimal, not in degrees
[EVL-847]
OPT TIP - data on details tab must go to main tab
[EVL-805] 0.6.0
OPT ALL - data on intents tab must go to main tab (brightness can
go to another tab)
[EVL-804] 0.6.0
- ALL - Keep Icon menus (+search tool) fixed in the LHSC
[EVL-836]
- ALL - Tool-tip help on table navigation?
[EVL-837]
- ALL - Also add table navigation to top of table?
[EVL-838]
- SCT - (ALL?) For recalculated coordinates (* in table), need
a footnote (or tool-tip) to explain
[EVL-839]
ALL - IM/EXport dialog boxes must be the same, and allow for
export name other than default
[EVL-851] 0.9.0
ALL - IMport dialog must close after upload and buttons
browse, upload, cancel next to each other (close is now redundant)
[EVL-852] 0.7.0
- OPT - Warning about 1.5625MHz being larger than the receiver
bw in 4 band in NRAO defaults should be suppressed
[EVL-853]
ALL - Plain FYI info in feedback should not be blue
(=warning, nor red), but black
[EVL-821] 0.6.0
ALL - One timeout clock for all tools, few hours, using any tool
[EVL-854]
- OPT - Name, Email, Phone from DB into final script to operator
[EVL-822] 0.7.0
- HELP should go in the html version
[EVL-855]
- OPT - wish for a global update if eg resource has changed
- ALL - wish for keyboard shortcuts for tabs, copy/paste,
up/down, back to the catalog, etc
[EVL-856]
- ALL - there is the general "making it even more beautiful" by
using the available real estate, fonts, colors
- ALL - Make sure no major issues arise from different browsers (..)
[EVL-292]
- OPT - cancel submission button unclear (makes read only copy? what to do then?)
[EVL-803]
-
-
SCT issues
- Source lists - remove or fill out CARMA. Combine all lists
but VLA (for the moment) in a catalog OTHER so it takes less real
estate. Best to merge all lists, but we (sci) should do that.
Adv Search - Search on Calcodes must be P, P+S, P+S+W, and
incl "ANY" array
[EVL-843,844] 0.6.0,0.9.0
- Adv Search - Flux search on more than one band, and any band
(tick, not radio), and option with "and" or "or" for search
- Adv Search - Cone should have select source and default 10d radius
- Adv Search - Top list of catalogs in neat table, add an ALL
button, check ALL by default
- Do NOT allow spaces (or !?#/\*&|`'"^% etc) in the source
name; ok are +, -, _, =, ., as special chars only (what about
)(,}{,][,><,@,~,:,;,, etc)
-
-
OPT issues
- LIST - one digit too much in timing of 1st scan T2 and T3
(fixed ".0" typo for "." ? Also in start LST)
[EVL-857]
DOPP - too many ref frames, and remove word "kinematic" from LSR
[EVL-812] 0.6.0
- DOPP - button for AC&BD same setting (default on)
[EVL-858]
- DOPP - button for select other source (ie: this, other, specify)
[EVL-859]
LIST - T1: move Freq column to before BW (after Mode)
[EVL-823] 0.6.0
- LIST - T1: add "sky" or "(rest,frame,def)" to end of line
[EVL-861]
- LIST - T2: add doppler source or (pos, vel, frame) and remove freq
[EVL-862]
- LIST - T3: don't display wrap if don't care or if in 85-275 range
[EVL-845]
LIST - T3: Show calculated frequency accurate to 0.01 kHz (1 MHz not
enough for line), and in T1 as much accuracy as entered (eg for rest freq)
[EVL-863] 0.6.0
- LIST - all errors/warnings should have an identifying scan number
[EVL-864]
- LIST print - bottom, somehow distinguish between error and
warning in B/W prints (besides from color, eg by saying "Error: " etc)
[EVL-865]
- green dot button - should be portal to scan default list (later)
LIST - T3 header, distinguish more between LST and UT day,
eg, by putting the other one than selected in brackets
[EVL-824] 0.6.0
- SB constraints - add a "schedule as", projectid and sbid, and
give API/WIND band defaults in a table (perhaps in a pop-up or tool-tip)
No warning if pointing scan does not include previous
pointing result, but vise versa (when it does, which can be ok for
secondary ptg - is this tested?)
[EVL-911] 0.9.0
- Option to ignore a specific waring
- SCAN - T2: wish for more info in the resource (eg band/channel width)
- LIST - next to print add "(expand loops if you want to print
them)" or make a tool tip
[EVL-866]
- LIST - T2: if no time on source, Min/Max Ha and PA should not
be shown or added to the total range. Showing this in T3 is proper
(for planning purposes).
[EVL-868]
LIST - T3: maybe a small divider at end of loop when expanded
to guide the eye
[EVL-825] 0.7.0
Filter out the "VLA/" from proposal name of submitted SB
[EVL-869] 0.7.0
-
End of Page
|