!  Example sched input for a VLBA using the RDBE and the
!  wideband 6 cm receiver.  Setups are given that use dual
!  polarization in one pair of IFs and that use single 
!  polarization in two IFs at very different frequencies.
!  
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
 version = 1
 expt    = 'Test of new C band receivers.'
 expcode = egCwide

 piname   = 'Craig Walker'    
 address1 = 'National Radio Astronomy Observatory'  
 address2 = 'P. O. Box O'                           
 address3 = 'Socorro, New Mexico, 87801'
 address4 = ' U.S.A. '
 phone    = '505 835 7247 '    
 obsphone = '505 835 7247 '     
 email    = cwalker@nrao.edu  
 fax      = '505 835 7027 '   
 obsmode  = '6cm 128-4-2 '
 obstype  = VLBA
 note1    = ' ' 
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl   = Socorro
coravg   = 4
corchan  = 16
cornant  = 10
corpol   = on
corwtfn  = uniform
corsrcs  = standard
cortape  = FTP
corship1 = 'Craig Walker'
corship2 = 'P. O. Box O'
corship3 = 'Socorro NM 87801'

! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!    Normally SCHED will not overwrite preexisting files. 
!    If you want this protection, comment this following line.
 overwrit

 sumitem  = el1, az1, disk, tpstart

! ==========================================================
! ======= Standard Source and Station Catalogs  ============
! ==========================================================
!  These are sched defaults so they are not really needed.

stafile  = $SCHED/catalogs/stations_RDBE.dat
srcfile  = $SCHED/catalogs/sources.vlba
freqfile = $SCHED/catalogs/freq_RDBE.dat

! ==========================================================
! =======================  Setup file  =====================
! ==========================================================
!
setini = egCw1IF.6cm /         !  1 IF pair, dual pol.
  dbe      = 'rdbe_pfb'
  format   = 'mark5b'
  nchan    = 16   
  bbfilt   = 32.0  
  bits     = 2
  netside  = L
  pol      = R,L,R,L, R,L,R,L, R,L,R,L, R,L,R,L
  freqref  = 4100.0
!   Compact frequency set.
  freqoff  =  912.0,  912.0, 880.0,  880.0, 848.0,  848.0, 816.0,  816.0,
              784.0,  784.0, 752.0,  752.0, 720.0,  720.0, 688.0,  688.0
!   Spread version.
!   freqoff  = 1008.0, 1008.0, 944.0,  944.0, 880.0,  880.0, 816.0,  816.0,
!              752.0,  752.0, 688.0,  688.0, 624.0,  624.0, 560.0,  560.0
  /
endset /

setini = egCw2IF.6cm /         !  1 pol, 2 IFs.
  dbe      = 'rdbe_pfb'
  format   = 'mark5b'
  nchan    = 16   
  bbfilt   = 32.0  
  bits     = 2
  netside  = L
  pol      = R
  freqref  = 4100.0,4100.0,4100.0,4100.0,4100.0,4100.0,4100.0,4100.0,
             8100.0,8100.0,8100.0,8100.0,8100.0,8100.0,8100.0,8100.0
  freqoff  =  912.0, 880.0, 848.0, 816.0, 784.0, 752.0, 720.0, 688.0,
             -912.0,-880.0,-848.0,-816.0,-784.0,-752.0,-720.0,-688.0
  /
endset /


! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================

year     = 1995
month    = 7
day      = 5
start    = 20:00:00

! ==========================================================
! ========================  The Scans  =====================
! ==========================================================

stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK

group 4 rep 4
setup = egCw1IF.6cm  source='DA193'   gap=4:00 dur=4:00 /
setup = egCw2IF.6cm                   gap=0:20  /
setup = egCw1IF.6cm  source='4C39.25'  gap=4:00  /
setup = egCw2IF.6cm                    gap=0:20  /