#!/bin/csh # # Try with VEX file # # ======================================================== # ===== Script to make pointing files for the VLBA ===== # ======================================================== # Set stations to be processed. # Note that the case used here will appear in the sum and # vex file names, so it is better to use lower. # The schedules need to be different depending on whether # a 3mm receiver is present. # Examples: # set stalist_3mm="hn nl fd la pt kp ov mk" # set stalist_no3mm="br sc" # set stalist_no3mm="" eg use blank if no stations of this type. set stalist_3mm="pt hn" set stalist_no3mm="hn" # # Set times and experiment code # echo Sched environment variable = $SCHED echo PLANET_DATA environoment variable = $PLANET_DATA cat <! times.par year = 1996 month = 10 day = 25 start = 0:00:00 opdur = 4:00:00 ! Total project duration eofp set expcode="ptg" # ===================================================================== # ===================================================================== # ====== ====== # ====== Changes not normally needed below this line. ====== # ====== ====== # ===================================================================== # ===================================================================== # Specify the location of the setup files. # setenv SETDIR $SCHED/setups # # Put much of the generic setup information in ptg_setup.par # cat <! ptg_setup.par ! --------------------------------------------------------------------- ! SCHED input file setup stuff to be used with pointing proceedure doptg. ! ----- Cover information version = 1 expt = 'STARTUP pointing' obstype = PTVLBA obsmode = 'Multi-frequency pointing observations.' piname = 'Operations' phone = '505 835 7251' obsphone = '505 835 7251' fax = '505 835 7027' email = 'vlbaops@nrao.edu' address1 = 'AOC' ! ----- Catalogs etc. srcfile = '$SCHED/catalogs/sources.pointing' stafile = '$SCHED/catalogs/stations.dat' ephfile = '$PLANET_DATA/JPLEPH.405.2' !ephfile = '$SCHED/catalogs/JPLEPH.405.2.Linux' ! ----- Schedule instructions sumitem = EL1, AZ1 ! Start elevation and azimuth in summary. ptvlba ptdur = 15 ! => scan length = ptslew + 2*ptdur + N*10*ptdur ! The autoleveling scan is 2*ptdur long for pcx. ! Here we have 15+30+2*150 = 345s = 5:45 dwell = 5:45 ptslew = 15 optmode = SCANS ! Select scans that are above minimum elevation. opminel = 20. ! Minimum elevation. eofs # Now make a file with the actual schedule info for 3mm sites. # Any imbedded catalogs etc must be here. cat <! ptg_3mm.par ! ----- Spectral lines ! ----- Set up for 4 channels - 2 on line, 2 off. lineinit / lineset ='H2O' restfreq=22235.08,22235.08,22285.08,22285.08 / lineset ='SiO431' restfreq=43122.03,43122.03,43222.03,43222.03 / lineset ='SiO862' restfreq=86243.4, 86243.4, 86343.4, 86343.4 / endlines / ! ----- The detailed schedule ! The frequencies are in an order reasonable for FRM. ! 50/90 cm CYGA, TAUA, 3C274 ! 20-4 cm 3C454.3, 3C123, 3C274 ! 2, 1 cm DR21, 3C84, 3C274 ! 7 mm RCAS, RLEO, WHYA, DR21, 3C84, 3C273, planets ! 3 mm RCAS, RLEO, WHYA, planets ! Group must equal the number of scans below. ! (Group*rep) must be less than 2000 (as of 18 Apr 1996). ! The 7mm line sources used to have qual=50. This used to be the way ! to trigger line processing. Now CALCODE='L' does it. ! Note that for a peak=1 scan, no reference pointing will be done ! if the slew takes longer than 40 seconds. That is partly why ! there is a second peak scan. group=(10*3+8*3) rep=50 setup='$SETDIR/pt90cm.set' source 'CYGA' nodop bw=0,0 / setup='$SETDIR/pt4cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt18cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt6cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt13cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt4cmsx.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt1cm.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt24ghz.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt2cm.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'JUPITER' nodop bw=0,0 qual=0 noptvlba peak=1 dwell=01:00 / noptvlba peak=1 dwell=01:00 / nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt3mm.set' nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt7mm.set' source 'RCAS' doppler bw=2,2 qual=0 linename='SiO431' noptvlba peak=1 dwell=01:00 / noptvlba peak=1 dwell=01:00 / nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt3mm.set' nopeak ptvlba dwell = 5:45 linename='SiO862' / setup='$SETDIR/pt90cm.set' source 'TAUA' nodop bw=0,0 / setup='$SETDIR/pt4cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt18cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt6cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt13cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt4cmsx.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt1cm.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt24ghz.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt2cm.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'RLEO' doppler bw=2,2 qual=0 linename='SiO431' noptvlba peak=1 dwell=01:00 / noptvlba peak=1 dwell=01:00 / nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt3mm.set' nopeak ptvlba dwell = 5:45 linename='SiO862' / setup='$SETDIR/pt7mm.set' source 'VENUS' nodop bw=0,0 qual=0 noptvlba peak=1 dwell=01:00 / noptvlba peak=1 dwell=01:00 / nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt3mm.set' nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt90cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt4cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt18cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt6cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt13cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt4cmsx.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt1cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt24ghz.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt2cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source '3C273' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'WHYA' doppler bw=2,2 qual=0 linename='SiO431' noptvlba peak=1 dwell=01:00 / noptvlba peak=1 dwell=01:00 / nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt3mm.set' nopeak ptvlba dwell = 5:45 linename='SiO862' / setup='$SETDIR/pt7mm.set' source 'SATURN' nodop bw=0,0 qual=0 noptvlba peak=1 dwell=01:00 / noptvlba peak=1 dwell=01:00 / nopeak ptvlba dwell = 5:45 / setup='$SETDIR/pt3mm.set' nopeak ptvlba dwell = 5:45 / ! --------------------------------------------------------------------- eofs # Now make a file with the actual schedule info for sites without 3mm. # Any imbedded catalogs etc must be here. cat <! ptg_no3mm.par ! ----- Spectral lines ! ----- Set up for 4 channels - 2 on line, 2 off. lineinit / lineset ='H2O' restfreq=22235.08,22235.08,22285.08,22285.08 / lineset ='SiO431' restfreq=43122.03,43122.03,43222.03,43222.03 / lineset ='SiO862' restfreq=86243.4, 86243.4, 86243.4, 86243.4 / endlines / ! ----- The detailed schedule ! The frequencies are in an order reasonable for FRM. ! 50/90 cm CYGA, TAUA, 3C274 ! 20-4 cm 3C454.3, 3C123, 3C274 ! 2, 1 cm DR21, 3C84, 3C274 ! 7 mm RCAS, RLEO, WHYA, DR21, 3C84, 3C273, planets ! Group must equal the number of scans below. ! (Group*rep) must be less than 2000 (as of 18 Apr 1996). ! The 7mm line sources used to have qual=50. This used to be the way ! to trigger line processing. Now CALCODE='L' does it. linename='SiO431' group=(12*3) rep=60 setup='$SETDIR/pt90cm.set' source 'CYGA' nodop bw=0,0 / setup='$SETDIR/pt4cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt18cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt6cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt13cm.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt4cmsx.set' source '3C454.3' nodop bw=0,0 / setup='$SETDIR/pt1cm.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt24ghz.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt2cm.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'DR21' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'RCAS' doppler bw=2,2 qual=0 / setup='$SETDIR/pt7mm.set' source 'JUPITER' nodop bw=0,0 qual=0 / setup='$SETDIR/pt90cm.set' source 'TAUA' nodop bw=0,0 / setup='$SETDIR/pt4cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt18cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt6cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt13cm.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt4cmsx.set' source '3C123' nodop bw=0,0 / setup='$SETDIR/pt1cm.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt24ghz.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt2cm.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source '3C84' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'RLEO' doppler bw=2,2 qual=0 / setup='$SETDIR/pt7mm.set' source 'VENUS' nodop bw=0,0 qual=0 / setup='$SETDIR/pt90cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt4cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt18cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt6cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt13cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt4cmsx.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt1cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt24ghz.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt2cm.set' source '3C274' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source '3C273' nodop bw=0,0 / setup='$SETDIR/pt7mm.set' source 'WHYA' doppler bw=2,2 qual=0 / setup='$SETDIR/pt7mm.set' source 'SATURN' nodop bw=0,0 qual=0 / ! --------------------------------------------------------------------- eofs # # Now run sched separately for each 3mm station. # foreach station ( $stalist_3mm[1*] ) echo station=vlba_$station >! station.par echo expcode=$expcode >> station.par $SCHED/bin/sched <! station.par echo expcode=$expcode >> station.par $SCHED/bin/sched <