! -------------------------------------------------------------------
! EXAMPLE of SCHED file for non-VLBI VLA observations.
! -------------------------------------------------------------------
!  VLA observations to get flux densities of DA193 and 3C84 at VLA.
!  Note that the example setup files are used for cc and qq bands.

! -----  Cover Information

version  = 1 
expt     = 'Get flux densities for BV16'
piname   = 'Craig Walker'    
address1 = 'National Radio Astronomy Observatory'  
address2 = 'P. O. Box O'                           
address3 = 'Socorro, New Mexico, 87801'
address4 = ' U.S.A. '
phone    = '505 835 7247 '    
obsphone = '505 835 7247 '     
email    = 'cwalker@nrao.edu'  
fax      = '505 835 7027 '   
obsmode  = 'Continuum'
correl   = 'Socorro'           

! -----  File names and other details.
 
stafile   = $SCHED/catalogs/stations.dat
srcfile   = $SCHED/catalogs/sources.vlba
obstype   = vla           ! Tells SCHED that this is VLA only.
expcode   = BV016
stations  = VLA
vlatype   = CONTINUUM
vlausern  = 450
vlamode   = '  '

dovex=-1 ! No VEX file

lst                       ! Schedule in LST.

! -----  A source that is not in the external source list:

srccat /

source='CTA21'   ra=03:16:09.1383   dec= 16:17:40.448 
equinox='B1950'   calcode='B' /

endcat /

! -----  Scans.

day = 56719               ! LST day of stop of first scan.
start = 4:00:00           ! LST start time.

source = 'DA193'

 ! No reference pointing at the lower frequencies
 ! Note the manual_vla setup files should be in the current 
 ! directory.  
 vlamode = ' '  vlapeak = ' '
 dur = 8:00  setup = manual_vla-cc.set  /
 dur = 3:00  setup = $SCHED/setups/vla-uu.set  /
 dur = 3:00  setup = $SCHED/setups/vla-xx.set  /

 ! Use reference pointing at X band for K and Q band observations.
 vlamode = IR  vlapeak = ' '  
 dur = 5:00  setup = $SCHED/setups/vla-xx.set  /
 vlamode = ' '  vlapeak = T  
 dur = 4:00  setup = manual_vla-qq.set  /
             setup = $SCHED/setups/vla-kk.set  /

source = '3C48'
 vlamode = IR  vlapeak = ' '  
 dur = 8:00  setup = $SCHED/setups/vla-xx.set  /
 vlamode = ' '  vlapeak = T  
 dur = 4:00  setup = manual_vla-qq.set  /
             setup = $SCHED/setups/vla-kk.set  /

source = '3C84'
 vlamode = IR  vlapeak = ' '
 dur = 6:00  setup = $SCHED/setups/vla-xx.set  /
 vlamode = ' '  vlapeak = T  
 dur = 3:00  setup = manual_vla-qq.set  /
             setup = $SCHED/setups/vla-kk.set  /

 ! Do not use reference pointing for the rest of the session.
source = '3C84'
 vlamode = ' '  vlapeak = ' ' 
             setup = $SCHED/setups/vla-uu.set  /
             setup = $SCHED/setups/vla-xx.set  /
             setup = manual_vla-cc.set  /
             setup = manual_vla-cc.set  /
             setup = $SCHED/setups/vla-pp.set  /

source = '3C48'
 dur=6:00    setup = $SCHED/setups/vla-uu.set  /
 dur=3:00    setup = $SCHED/setups/vla-xx.set  /
             setup = manual_vla-cc.set  /
             setup = manual_vla-cc.set  /
 dur=4:00    setup = $SCHED/setups/vla-pp.set  /

source = 'DA193'
 dur=9:00    setup = $SCHED/setups/vla-uu.set  /
 dur=4:00    setup = $SCHED/setups/vla-xx.set  /
             setup = manual_vla-cc.set  /

source = 'CTA21'
 dur=10:00   setup = $SCHED/setups/vla-ll.set  /
 dur=4:00    setup = $SCHED/setups/vla-pp.set  /

! -------------------------------------------------------------------