!   Example schedule for Mark IV observations
!   A VEX format .skd file is created.
!   Provided by Huib vanLangevelde  5-Feb-1997.
!   Cover letter added by RCW  11-Apr-2000.
!
!   Control code and print requests
!
overwrite
sumitem=el1, el2, tape1, tape2, early, dwell
optmode = scans
opminant = 1
!
!   Proposal specific
!
expt     = 'OH Main line Global VLBI; Sched example'
expcode  = 'GM031'
version  =  99.9
piname   = 'Huib van Langevelde'
address1 = 'JIVE, Radiosterrenwacht Dwingeloo'
address2 = 'Postbus 2, 7990 AA Dwingeloo'
address3 = 'the Netherlands'
phone    = '+31 521 595 220'
obsphone = '+31 528 221 273'
fax      = '+31 521 597 332'
email    = 'huib@jive.nfra.nl'
obsmode  = 'VLBA/MKIV'
obstype  = 'VLBI'
note1    = 'Make sure PHASE CAL is OFF.'
!
!  Cover letter
!
coverlet /
Any text can be written here.  It will be written to the
summary file and the operator schedules.  This would be a good
place to put complicated instructions that cannot fit in the
notes above.  This is mainly useful for stations where some 
items have to be controlled by hand (pcal, tsys measurements,
special frequencies or wiring etc).  For the fully automated stations
like the VLBA, the operators don't tend to read any such notes.
endcover /
!
!  begin correlator
!
correl   = 'Socorro'
!
!   Need 12s averaging time and all channels we can get
!
coravg   = 12
corchan  = 512
cornant  = 8
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'standard'
cortape  = DAT
corship1 = 'Huib van Langevelde'
corship2 = 'JIVE, Radiosterrenwacht Dwingeloo'
corship3 = 'Postbus 2, 7990 AA Dwingeloo'
corship4 = 'the Netherlands'
cornote1 = 'Please make integration as short as possible'
!
!  end correlator, begin source info
!
srccat /
!
!  The original file claimed this position was good on a sub-mas
!  scale, but Hipparcos has the star moving several mas/yr.
!
!  We are testing the proper motions capability here.
!  The values are real ones from Hipparcos.
!
source = 'S_Per', 'HIP11093'
!   ra=02:22:51.71829  dec= 58:35:11.5782 equinox=j2000  ! source?
   ra=02:22:51.71254  dec= 58:35:11.4500 equinox=j2000  ! Hipparcos
   pmra=2.28  pmdec=-3.07  paralax=0.62  epoch=1991.25
   vel = -40 /
endcat /
!
!  Ready to start
!
year   = 1997
month  = 3
day    = 4
start  = 12:00:00 
!
!  Automatic tape allocation at VLBA stations.
!
autotape=2
!
!  Select setup and initialize lines
!
setinit  = egiv.set /
  !  GM31, 500 kHz oversampled and 2 bit for line sensitivity
  !  Both OH main lines 
  !
  nchan  = 4  samprate = 4.0 
  bits = 2    bbfilter = 0.5 
  !                                     ! no roll in EVN yet 
  pcal = off  barrel = roll_off         ! No PCal for line obs
  pol      = dual
  freqref = 1664.99
  freqoff = -0.5,-0.5,0.5,0.5
  /
endset /
!
setup = egiv.set
!
lineinit /
lineset  = 'OHmains'
restfreq = 1665.4018, 1665.4018, 1667.359, 1667.359 /
endlines /
!
linename = 'OHmains' doppler
!
!    Dwell schedule is best, Jb is slow especially near Zenit
!
stations = jodrell1, wstrbork, eflsberg, onsala85, medicina,
           noto, torun, vlba_hn, vlba_sc, gbt_vlba
!
!
source = '3C454.3'  gap = 40  dwell =22:00   dopsrc = 'S_Per' /
repeat 6 source = 'S_Per' gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
source = '3C84'  gap = 40  dwell =22:00   dopsrc = 'S_Per' /
repeat 6 source = 'S_Per' gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
source = '3C84'  gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
repeat 6 source = 'S_Per' gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
source = '3C84'  gap = 40  dwell =22:00   dopsrc = 'S_Per' /
repeat 6 source = 'S_Per' gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
source = '3C84'  gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
repeat 6 source = 'S_Per' gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
source = '3C84'  gap = 40  dwell =22:00   dopsrc = 'S_Per' /
repeat 6 source = 'S_Per' gap = 40  dwell = 22:00   dopsrc = 'S_Per' /
source = '3C84'  gap = 40  dwell = 22:00   dopsrc = 'S_Per' /