! Primary Stations Catalog for SCHED. ! ! Do not modify the standard copy of stations.dat directly. It is ! the combination of a number of "Master" files. See proceedure ! Update to see what is involved. Users making a special version ! can modify stations.dat at will. ! ! INPUT PARAMETERS: ! Parm Note Description ! STATION 3 Station name. ! STCODE Station code. Usually 2 letters. Used for scheduling. ! DBNAME 1 Station name in VLBA correlator and geodetic station lists. ! DBCODE 1 Station code used in VLBA correlator data base. ! FRAME Source of the solution providing station coordinates. ! CONTROL Type of control file. ! DAR Type of data aquisition rack. ! DISK Type of disk system like MARK5A. Can have tape and disk. ! RECORDER Type of tape recorder. ! NDRIVES Number of recorders at the site. ! NHEADS Number of recording head stacks on each recorder. ! ELEV 2 Site elevation above mean sea level or geocentric radius. ! LAT 2 Station latitude. ! LONG 2 Station longitude. ! ZALIM Zenith angle limit. ! X 2 Station X coordinate. ! Y 2 Station Y coordinate. ! Z 2 Station X coordinate. ! DXDT Rate of change of X coordinate (continental drift). ! DYDT Ditto for Y coordinate. ! DZDT Ditto for Z coordinate. ! EPOCH Time of zero offset from X,Y,Z. ! DESCRIP Any text. ! NDRIVES The number of tape drives at the station. ! HOR_AZ A list of azimuths at which the horizon is measured. ! HOR_EL The horizon elevation at the above azimuths. ! MOUNT The mount type as used by SCHED. ! AXISTYPE 1 The mount type according to the VLBA correlator database. ! AXISOFF The offset between the axes. ! AX1LIM Slew limits for first axis for several regions. ! AX2LIM Slew limits for the second axis in the same regions. ! AX1RATE The first axis slew rate. ! AX2RATE The second axis slew rate. ! AX1ACC Acceleration in deg/s/s, first axis ! AX2ACC Acceleration in deg/s/s, second axis ! TSETTLE Extra time required for source change beyond dist/rate. ! MINSETUP Minimum time between scans when using DWELL. ! ! NOTES: ! 1. These items appear redundant with STCODE, STATION, and MOUNT, but ! reflect the contents of the VLBA correlator data base which can ! be, and often is, different from what is used in SCHED for ! scheduling. Often this difference reflects the refusal by the ! array schedulers to specify before observe time which specific ! antenna is going to be used for single dish observations at places ! like the VLA and Westerbork. Therefore STCODE does not contain ! this information. But the correlator must know and has separate ! database entries for each pad (gets which was used from the log). ! AXISTYPE is there as a consistency check. SCHED users do not ! need to specify DBCODE, DBNAME, or AXISTYPE if providing their ! own catalog for SCHED. ! 2. At least one of (ELEV, LAT, LONG) or (X, Y, Z) must be provided. ! It is a bad idea to provide both. SCHED will calculate the ! missing one from the one provided. Note if ELEV is large, ! (ELEV, LAT, LONG) are treated as geocentric. If it is small, ! they are treated as geodetic. ! 3. *** WARNING: SCHED uses the first 4 characters in many places ! to detect a true VLBA station. Those characters should only be VLBA ! if all the hardware all the way up the antenna is VLBA type. ! ! ------------------------------------------------------------------ ! HISTORY (rather incomplete) ! ! May. 12, 1989 - VLBA stations updated to VLBA Memo 644 (done later?) ! Feb. 3, 1994 - Update to Barry Clark station codes. ! Jan. 5, 1993 - New station codes and SN50 control. ! Codes are the ones recommended by Porcas except for ! a few single letter codes and a few 3 letter codes for DSN. ! Dec. 5, 1994 - Remove HCRK control type. ! Jan. 17, 1995 - Added VLBA horizon information (150K limit). RCW ! Nov. 18, 1995 Added VLBA mount information. RCW ! Feb. 15, 1996 - Add slew information for many sites. RCW ! - Make station names consistent with pc-sched and sked. RCW ! - pc-sched and sked catalogs don't agree on all parameters. ! - This whole area needs help. ! Dec. 2, 1996 - Add some Japanese stations. Note in last months various ! parameters like DAR, RECORDER etc were added. ! Mar. 14, 1997 - Merge with "huibstat.dat" to include VEX and ! Mark IV info. RCW. Huibstat.dat from Huib vanLangevelde. ! Mar. 25, 1997 - Incorporate changes to EVN etc stations from Huib. ! Mar. 25, 1997 - Split into rcwstat.dat and huibstat.dat for maintenance. ! From now on, stations.dat is the two catted together. ! Do not modify it directly. ! Oct. 1997 - More splits - to stations_APT.dat, stations_DSN.dat, ! stations_US.dat, stations_geodesy.dat, stations_EVN.dat, ! and stations_mm.dat. ! Nov. 5, 1997 - Add some S2 entries for Green Bank, Arecibo ... ! Feb. 25, 1998 - Setting up to get station locations from correlator ! data base. ! -- - Probably did not document a bunch of changes. ! Jan. 23, 2001 - Point ARECIBO position to locations.dat. RCW ! Apr. 23, 2001 - More Arecibo information prior to test. RCW. ! Oct. 15,16 2001 - Fix some Arecibo stuff. ! Dec. 28, 2001 - Increase TSETTLE from 2 to 6 sec for VLBA based on ! experience with 7mm Phase referencing. RCW ! Apr. 26, 2002 - GBT slew rates. Other GBT and Arec stuff changed ! earlier. RCW ! Feb. 22, 2003 - Accelerations. Start Mark 5. ! Apr. 03, 2003 - MINSETUP added. ! Apr. 04, 2003 - VLBA TSETTLE reduced to 4 compensating for ! acceleration time. ! May. 04, 2004 - GBT TSETTLE set to 20 after BK100 experience. ! Nov. 08, 2006 - Switching most stations to Mark5. ! Dec. 04, 2006 - Add Westford. ! ! ! VERSION is the date and time when this catalog was ! assembled from the master subcatalogs. VERSION = "2014Apr04-14:16:30" ! ! ===================================================================== ! The following are US stations not in the DSN and not primarily used ! for mm VLBI. These stations are maintained in file stations_US.dat. ! ===================================================================== ! Remove tapes from VLBA Oct. 19, 2006. RCW ! ! Adjust slew rates according to measurements April 29, 2010. RCW ! The rates are based on SCHED slew distance calculations and the ! flags from the on-line system. Software and data are in RCW ! code area under VLBA_Test/SlewTest. The plots of slew rates ! are strongly curved for short slews if the settling time number ! is wrong so this was a good way to determine that value. It is ! axis dependent, with the elevation taking longer. The numbers ! in the program are TSETTLE plus 2 seconds because the simple ! program does not explicitly take into account acceleration. ! Generically use 6 seconds for TSETTLE which is safe for dwell ! times. Some day, allow different values for different axes. ! Note that the nominal VLBA rates are AX1RATE=90 AX2RATE=30. ! STATION=VLBA_PT STCODE=Pt CONTROL=VLBA DBNAME = PIETOWN MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=82.3 AX2RATE=29.3 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! PT From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 60, 65, 70, 75, 80, 85,165,170,180,185,190,195, 200,240,245,250,255,265,270,275,280,285,360 HOR_EL = 2, 2, 2, 3, 3, 2, 3, 2, 2, 3, 3, 4, 4, 3, 4, 4, 3, 4, 3, 3, 4, 3, 3, 2, 2 / STATION=VLBA_KP STCODE=Kp CONTROL=VLBA DBNAME = KP-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=80.8 AX2RATE=29.4 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! KP From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95,105, 110,115,120,150,155,165,170,180,185,215,220,225,230,235, 240,255,260,265,270,360 HOR_EL = 2, 2, 2, 5, 6, 7, 7, 8, 8, 9, 6, 3, 2, 2, 3, 3, 2, 2, 3, 3, 2, 2, 3, 3, 4, 4, 5, 5, 4, 4, 3, 3, 2, 2 / STATION=VLBA_LA STCODE=La CONTROL=VLBA DBNAME = LA-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=82.0 AX2RATE=29.5 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! LA From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 75, 80, 85,130,135,145,150,250,255,300,305,315, 320,340,345,360 HOR_EL = 2, 2, 2, 3, 2, 2, 3, 3, 2, 2, 3, 3, 4, 4, 3, 3, 2, 2 / STATION=VLBA_BR STCODE=Br CONTROL=VLBA DBNAME = BR-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=83.6 AX2RATE=29.0 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! BR From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 10, 15, 25, 30, 40, 45, 70, 75,120,125,130,135, 155,160,185,190,195,220,225,235,240,245,250,255,265,270, 275,300,305,310,315,330,335,340,345,350,360 HOR_EL = 2, 2, 3, 2, 2, 3, 3, 4, 4, 5, 5, 4, 4, 3, 3, 2, 2, 3, 4, 4, 3, 3, 4, 4, 5, 6, 6, 5, 6, 6, 5, 6, 5, 5, 4, 4, 3, 2, 2 / STATION=VLBA_FD STCODE=Fd CONTROL=VLBA DBNAME = FD-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=84.3 AX2RATE=30.5 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT AX1ACC=0.75 AX2ACC=0.25 ! FD From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 10, 15, 20, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95,100,105,110,115,150,155,160,220,225, 230,240,245,250,255,260,265,270,275,280,285,290,295,300, 305,310,315,325,330,335,340,345,360 HOR_EL = 5, 4, 5, 5, 3, 3, 2, 3, 2, 2, 3, 4, 7, 5, 4, 4, 5, 6, 6, 5, 4, 3, 2, 2, 3, 2, 2, 4, 2, 2, 3, 3, 4, 5, 5, 4, 4, 3, 3, 2, 2, 3, 4, 5, 4, 4, 5, 6, 6, 5, 5 / STATION=VLBA_SC STCODE=Sc CONTROL=VLBA DBNAME = SC-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=84.5 AX2RATE=28.5 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! SC From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 10, 20, 25, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 95,100,105,110,115,120,125,130,135,140,145,150,155, 160,165,175,180,185,190,200,205,210,215,220,230,235,240, 245,250,260,265,270,275,280,360 HOR_EL = 2, 2, 3, 3, 2, 2, 3, 3, 4, 6, 6, 8, 9, 9, 8, 8, 9, 10, 12, 14, 16, 16, 15, 13, 13, 12, 11, 11, 10, 9, 9, 11, 13, 14, 14, 15, 13, 12, 10, 10, 9, 8, 8, 7, 7, 6, 4, 3, 2, 2 / STATION=VLBA_NL STCODE=Nl CONTROL=VLBA DBNAME = NL-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=82.5 AX2RATE=28.7 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! NL From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 75, 80, 85,100,105,110,115,120,125,130,135,140, 145,150,155,160,165,170,190,195,200,220,225,360 HOR_EL = 2, 2, 2, 3, 6, 6, 8, 7, 7, 6, 7, 7, 6, 6, 7, 7, 6, 5, 4, 3, 3, 2, 3, 3, 2, 2 / STATION=VLBA_OV STCODE=Ov CONTROL=VLBA DBNAME = OV-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=84.5 AX2RATE=28.7 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! OV From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 65, 70, 75, 80, 85, 90, 95,100,105,110,115,120,125,130,145,150, 155,175,180,185,190,195,200,205,210,230,235,240,245,250, 260,265,270,280,285,290,295,300,305,310,350,355,360 HOR_EL = 3, 5, 5, 7, 9, 10, 12, 13, 13, 14, 15, 15, 13, 12, 11, 10, 9, 8, 7, 6, 6, 5, 4, 3, 3, 4, 4, 3, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7, 6, 7, 8, 9, 9, 8, 7, 7, 5, 4, 4, 3, 3, 2, 2, 3, 3 / STATION=VLBA_MK STCODE=Mk CONTROL=VLBA DBNAME = MK-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=86.8 AX2RATE=28.3 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! MK From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 10, 15, 20,120,125,130,135,140,145,150,155,160, 165,170,175,185,190,195,200,205,210,215,220,255,260,270, 275,280,285,290,295,300,305,310,315,320,325,330,335,340, 345,350,355,360 HOR_EL = 5, 4, 3, 3, 2, 2, 4, 5, 5, 4, 4, 6, 8, 8, 11, 12, 13, 13, 11, 11, 9, 7, 5, 3, 2, 2, 3, 3, 5, 6, 8, 10, 12, 14, 12, 11, 9, 10, 11, 10, 12, 14, 12, 9, 7, 5 / STATION=VLBA_HN STCODE=Hn CONTROL=VLBA DBNAME = HN-VLBA MOUNT=ALTAZ AX1LIM=-90,450 AX2LIM=2.25,90 AX1RATE=81.3 AX2RATE=26.7 AX1ACC=0.75 AX2ACC=0.25 TSETTLE=6 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! HN From 150 K Ts line by Beasley and Medcalf Aug 1992. HOR_AZ = 0, 5, 30, 35, 40, 45, 65, 70, 80, 85, 90, 95,100,105, 110,115,120,125,130,135,140,145,150,155,160,165,170,190, 195,200,205,210,220,225,230,235,240,245,250,255,270,275, 290,295,315,320,325,330,335,345,350,355,360 HOR_EL = 6, 6, 6, 4, 5, 4, 4, 5, 5, 4, 5, 4, 4, 5, 3, 4, 4, 5, 4, 6, 5, 7, 7, 5, 3, 5, 4, 4, 2, 5, 5, 6, 6, 5, 6, 4, 5, 5, 4, 5, 5, 4, 4, 5, 5, 6, 5, 5, 6, 6, 5, 5, 6 / ! ! Some stations with VLBA terminals and control computers: ! SCHED no longer accepts CONTROL=VEX so move the parameters from ! stations_RDBE to here. Changes are to CONTROL, DAR, and DISK. ! STATION=VLA STCODE=Y CONTROL=VEX DBNAME = VLA MOUNT=ALTAZ AX1LIM=-85,445 AX2LIM=8,90 AX1RATE=40 AX2RATE=20 AX1ACC=2.2 AX2ACC=2.2 ! Broilo Dec. 5, 2005 ! AX1ACC=1.5 AX2ACC=1.0 source? From before Dec 2005. TSETTLE = 15 DAR=WIDAR NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5C MEDIADEF=DISK TSCAL=CONT HOR_AZ = 0,360 HOR_EL = 8,8 ! Horizon not blocked to El limit. / STATION=VLA1 STCODE=Y CONTROL=VEX ! The coordinates are for pad E8 which will often, but not always, ! be the one used. At 7mm, some other pad must be used because ! antenna 9, on pad E8, does not have a receiver. DBNAME = VLA_E8 MOUNT=ALTAZ AX1LIM=-85,445 AX2LIM=8,90 AX1RATE=40 AX2RATE=20 AX1ACC=2.2 AX2ACC=2.2 ! Broilo Dec. 5, 2005 TSETTLE = 15 DAR=WIDAR NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5C MEDIADEF=DISK TSCAL=CONT HOR_AZ = 0,360 HOR_EL = 8,8 ! Horizon not blocked to El limit. / ! Old TSETTLE = 15 Below based on Ulvestad report from bu030a ! He had to add 12s (actually between 8 and 14). ! Acceleration added since then and adds about 1s, so add 11. STATION=VLA27 STCODE=Y CONTROL=VEX DBNAME = VLA MOUNT=ALTAZ AX1LIM=-85,445 AX2LIM=8,90 AX1RATE=40 AX2RATE=20 AX1ACC=2.2 AX2ACC=2.2 ! Broilo Dec. 5, 2005 TSETTLE = 26 DAR=WIDAR NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5C MEDIADEF=DISK TSCAL=CONT HOR_AZ = 0,360 HOR_EL = 8,8 ! Horizon not blocked to El limit. / STATION=N140VLBA STCODE=Gb CONTROL=NRAOV ZALIM=88.000 DBNAME = NRAO_140 MOUNT = EQUAT AX1RATE=20 AX2RATE=20 ! From bvance email 16nov95. AX1LIM= -3.296,3.296, -4.958,4.958, -7.092,7.092 AX2LIM= -45, -36, -36, -16, -16, 86 TSETTLE=20 DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT ! For Tsys measurement, allow an extra minute. / ! Change DBNAME to match appropriate entry in locations.dat Sep. 23, 2009 ! Change el limit based on Ghigo email of Aug 16, 2010. STATION=GBT_VLBA STCODE=Gb CONTROL=VLBA DBNAME = GBT-VLBA MOUNT = ALTAZ AX1RATE=36 AX2RATE=18 AX1ACC=0.05 AX2ACC=0.05 AX1LIM= -90, 450 AX2LIM= 6, 88 ! TSETTLE based on BK110 experience. This should be monitored. TSETTLE = 20.0 MINSETUP = 10 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 / STATION=GBT_COLD STCODE=Gb CONTROL=VLBA ! Special version of GBT entry with slow azimuth slew to use when ! the temperature is below 17 F (-8.3C). This happens mainly in ! Dec, Jan, and Feb and mainly at night. ! Change DBNAME to match appropriate entry in locations.dat Jan. 23, 2009 ! Change el limit based on Ghigo email of Aug 16, 2010. DBNAME = GBT-VLBA MOUNT = ALTAZ AX1RATE=17 AX2RATE=18 AX1ACC=0.05 AX2ACC=0.05 AX1LIM= -90, 450 AX2LIM= 6, 88 ! TSETTLE based on BK110 experience. This should be monitored. TSETTLE = 20.0 MINSETUP = 10 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 / ! ! Other stations. ! STATION=ARECIBO STCODE=Ar CONTROL=VEX DBNAME = ARECIBO MOUNT=ALTAZ AX1RATE=25 AX2RATE=2.5 AX1LIM=0,720 AX2LIM=70.3,88.8 TSETTLE = 7 AX1ACC = 0.1 AX2ACC = 0.025 DISK=MARK5A MEDIADEF=DISK TSCAL=CONT DAR=VLBA4 NBBC=8 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 / ! ! Inactive stations. Keep in case they get active again. Much of ! this information may be out of date or wrong. ! Beware that there are some (eg OV) with the same station codes ! as some others in the active list. ! ! STATION=OVRO STCODE=Ov CONTROL=NRAO ! MOUNT=ALTAZ AX1RATE=14 AX2RATE=14 AX1LIM=270,690 AX2LIM=14,88 ! ELEV= 6371610.00 LONG= 118:16:56.75 LAT= 37:02:47.52 ! TSETTLE=2 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! STATION=MARYLAND STCODE=Md CONTROL=SNAP ZALIM=88.000 ! ! Axis range probably wrong. Station no longer in use? ! MOUNT=EQUAT AX1RATE=25 AX2RATE=25 AX1LIM=-5.5,5.5 AX2LIM=-90,90 ! ELEV= 30.00 LONG= 077:13:59.88 LAT= 38:22:26.05 ! TSETTLE=2 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! STATION=PENTICTO STCODE=Pe CONTROL=SNAP ZALIM=80.000 ! ELEV= 100.00 LONG= 119:36:00.00 LAT= 49:17:59.99 ! TSETTLE=2 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! STATION=ITA STCODE=It CONTROL=SNAP ! MOUNT=ALTAZ AX1RATE=60 AX2RATE=60 AX1LIM=270,810 AX2LIM=5,88 ! ELEV= 6380000.00 LONG= 046:33:00.00 LAT=-23:12:00.00 ! TSETTLE=2 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! ! ===================================================================== ! The following entries in the SCHED stations catalog are for EVN ! antennas. ! These stations are maintained in file stations_EVN.dat. ! ===================================================================== ! ! Stations below are maintained by Huib van Langevelde. ! Stations below are maintained by Cormac Reynolds from 30Nov00. ! Stations below are maintained by Antonis Polatidis+ from Mar08 ! Stations below are maintained by Friso Olnon (schedsvn) from Sep09 ! ! Do not modify stations.dat directly. It is a combination of ! rcwstat.dat and huibstat.dat and any changes would be lost at the ! next update. ! ! 231097: Sh elevation limits ! 211097: updates by Phil Edwards VSOG (hart_S2, Shang_s2) ! 170997: changed to stations_EVN.dat (added Hart and Puschino) ! 300797: latest version when starting numbering. ! 250298: get positions from VLBA correlator data base (RCW). ! 110599: Hart to MkIV (Huib) added comments from Quick 220699 ! 280300: Urumqi is a MkIV (soon) ! 280300: Remove comma after Urumqi and set EB to 20 deg/min az. ! 301100: Responsibility for maintenance passed to Cormac Reynolds. ! 050701: TSETTLE for Ef changed from 2 to 15 secs. ! 021001: NHEADS=2 for ONSALA60 and EFLSBERG ! 031001: NBBC=8 for Mh (until replacements arrive). ! 220102: recorder=VLBA4 for SH/YB ! 030402: Update for 2 head recording, ShUrHhMcWbJbNtYbCmOnRo. Update JB1 ! slew rates. ! 140502: Cm DBNAME changed to match new locations.dat name. ! 140903: Added accelerations for Ef,Cm,Jb1,Jb2,Mc,Mh,Hh ! 260903: Added accelerations for Tr ! 070104: Added acc for Wb ! 230905: Tsettle for Jb2 from 20 to 2 secs (email from Gunn) ! 270905: Shanghai reduced to 8 BBCs (email from An Tao) ! 151105: Added DISK=MARK5A and MEDIADEF=DISK for EVN stations. Updated Torun ! TSETTLE (email from Borkowski) ! 221105: Update Shanghai (email from An Tao) ! 251105: Update Metsahovi (email Mujunen) ! 080206: Onsala horizon ! 061120: Added Mark5 for Eb and a few geodetics ! 061122: EB_VLBA ndrives=2 and change Defford to a VLBA4 ! 070228: PV and PdB now have disk as default medium ! 070820: Added Darnhall ! 070822: Removed tape info (RECORDER, NDRIVES, NHEADS) from most stations. ! 080510: Added new telescope YEBES40M, code YS, Mark5B but listed Mark5A ! Moved YEBES Yb to "Stations no longer used" and comment it out ! 080610: Sh back to 14BBCs ! 081105: Added MERLIN telescopes from JIVE database ! Kept old info of Defford on "Stations no longer used" TSETTLE=2 ! Await confirmation from JB people ! 081105: Comment out NOTO_S2, no S2 in Noto ! 081105: Added QUASAR stations - Sv Ba Zc ! 090511: Added KUNMING station ! 090706: Added BEIJING station (MIYUN50 to be?) ! 090708: Modified AX* for SHANGHAI, URUMQI, KUNMING and BEIJING ! 090924: Added Robledo 34m ! 090924: Renamed BEIJING to MIYUN ! 091015: Moved Robledo 34m to stations_DSN.dat ! 011102: Updated Onsala 20m and 25m parameters ! 100722: Commenting out stations with newly prohibited control types ! or recorder types. RCW. ! 120613: Reduce Onsala60 elevation limit to 87 degress (was 88). DMS ! 130404: Add HART15M. CR ! 131106: Replacing EB_VLBA and EFLSBERG entries. ! 131206: Renaming EB_VLBA to EB_RDBE. RCW. ! 140210: HART 26m now has a DBBC. CR ! ------------------------------------------------------------------ ! ************* WARNING ******************* ! SCHED uses the first 4 characters in many places to detect ! a true VLBA station. Those characters should only be VLBA ! if all the hardware all the way up the antenna is VLBA type. ! ! ------------------------------------------------------------------ ! ! STATION CATALOG entries for the Effelsberg DBBC and RDBE replaced ! using new entries supplied by Uwe Bach ! STATION=EB_RDBE STCODE=Eb CONTROL=VEX ! Note use "EFLSBERG" for the DBBC. DBNAME = EFLSBERG MOUNT=ALTAZ AX1RATE=25 AX2RATE=15 AX1LIM=34,480 AX2LIM=9,89 TSETTLE=9 DAR=RDBE TSCAL=CONT NBBC=8 AX1ACC=0.02 AX2ACC=0.02 DISK=MARK5C MEDIADEF=DISK ! The +10K over nominal Tsys horizon at 6cm. ! Measured and send by Uwe Bach Jul 2013. HOR_AZ = 0, 10, 20, 30, 40, 50, 60, 70, 80, 90,100,110,120,130,140, 150,160,170,180,190,200,210,220,230,240,250,260,270,280,290, 300,310,320,330,340,350,360 HOR_EL = 11, 13, 16, 19, 21, 21, 21, 20, 18, 15, 16, 16, 15, 15, 13, 8, 7, 7, 7, 7, 9, 11, 11, 11, 10, 9, 8, 12, 14, 14, 14, 14, 13, 8, 7, 8, 11 / ! STATION=CAMBG32M STCODE=Cm CONTROL=VEX ! CR changed DAR 12Jan01, changed Recorder 03Apr02. ! slew rates updated from P. Burgess (see: ! newton.jb.man.ac.uk/slews.htm) ! Settle time updated from Bob Campbell email DBNAME = CAMB32 MOUNT=ALTAZ AX1RATE=40 AX2RATE=20 AX1ACC=0.026 AX2ACC=0.0225 AX1LIM=270,685 AX2LIM=2,89 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / STATION=DARNHALL STCODE=Da CONTROL=VEX ! added by CR 2007/08/20. email from Peter Thomasson 2007/08/22. Note that ! the maximum speed in either axis is reduced by a factor of ~16 if the ! telescope is within 5 degrees of any limit (not modelled by SCHED). ! Settle time updated from Bob Campbell email DBNAME = DARNHALL MOUNT=ALTAZ AX1RATE=20 AX2RATE=20 AX1ACC=0.016 AX2ACC=0.016 AX1LIM=-85,325 AX2LIM=2.5,90 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / STATION=DEFFORD STCODE=De CONTROL=VEX ! added by RMC 2008/08/26. ! slew rates assumed to be same as Darnhall until we hear from JB folk ! Settle time updated from Bob Campbell email DBNAME = DEFFORD MOUNT=ALTAZ AX1RATE=20 AX2RATE=20 AX1ACC=0.016 AX2ACC=0.016 AX1LIM=-85,325 AX2LIM=2.5,90 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / STATION=KNOCKIN STCODE=Kn CONTROL=VEX ! added by RMC 2008/08/26. ! knockin = VLA (E-system) dish like darnhall ! Settle time updated from Bob Campbell email DBNAME = KNOCKIN MOUNT=ALTAZ AX1RATE=20 AX2RATE=20 AX1ACC=0.016 AX2ACC=0.016 AX1LIM=-85,325 AX2LIM=2.5,90 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / STATION=TABLEY STCODE=Ta CONTROL=VEX ! added by RMC 2008/08/26. ! tabley (==pickmere) = VLA (E-system) dish like darnhall ! Settle time updated from Bob Campbell email DBNAME = TABLEY MOUNT=ALTAZ AX1RATE=20 AX2RATE=20 AX1ACC=0.016 AX2ACC=0.016 AX1LIM=-85,325 AX2LIM=2.5,90 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / ! ! SCHED dies reading the Simeiz input since control=SN50 was ! disallowed. So commenting the station out until it is fixed. ! July 22, 2010 RCW. ! ! STATION=SIMEIZ STCODE=Sm CONTROL=SN50 ! huib 12/9/96 used to be called Crimea ! DBNAME = CRIMEA ! MOUNT=ALTAZ AX1RATE=30 AX2RATE=18 AX1LIM=332,748 AX2LIM=3,85 ! TSETTLE=2 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! Entry for EFLSBERG updated by DMS 2013-11-06; content supplied by Uwe Bach. STATION=EFLSBERG STCODE=Ef CONTROL=VEX ! This is for DBBC. Use EB_VLBA for the RDBE. ! Uses Ef station code preferred by e-mail Dave Graham 26/11/96 ! acceleration from Graham Aug03 DBNAME = EFLSBERG MOUNT=ALTAZ AX1RATE=25 AX2RATE=15 AX1LIM=34,480 AX2LIM=9,89 TSETTLE=9 DAR=DBBC DBBCVER=ASTRO TSCAL=CONT NBBC=16 AX1ACC=0.02 AX2ACC=0.02 DISK=MARK5B MEDIADEF=DISK ! The +10K over nominal Tsys horizon at 6cm. ! Measured and send by Uwe Bach Jul 2013. HOR_AZ = 0, 10, 20, 30, 40, 50, 60, 70, 80, 90,100,110,120,130,140, 150,160,170,180,190,200,210,220,230,240,250,260,270,280,290, 300,310,320,330,340,350,360 HOR_EL = 11, 13, 16, 19, 21, 21, 21, 20, 18, 15, 16, 16, 15, 15, 13, 8, 7, 7, 7, 7, 9, 11, 11, 11, 10, 9, 8, 12, 14, 14, 14, 14, 13, 8, 7, 8, 11 / STATION=JODRELL1 STCODE=Jb CONTROL=VEX DBNAME = JODLMKI ! slew rates updated via Bob Campbell from P. Burgess (see: ! newton.jb.man.ac.uk/slews.htm) MOUNT=ALTAZ AX1RATE=15 AX2RATE=8 AX1ACC=0.026 AX2ACC=0.023 AX1LIM=-85,325 AX2LIM=3,89 TSETTLE=6 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 MAXSRCHR=12.0 DISK=MARK5A MEDIADEF=DISK / STATION=JODRELL2 STCODE=Jb CONTROL=VEX ! slew rates updated from P. Burgess via Bob Campbell (see: ! newton.jb.man.ac.uk/slews.htm) DBNAME = JB_Mk_2 MOUNT=ALTAZ AX1RATE=20.0 AX2RATE=20.0 AX1ACC=0.016 AX2ACC=0.022 AX1LIM=-90,330 AX2LIM=1,90 TSETTLE=2 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK / ! ! To use the Jodrell dishes on the Cm VLBA DAR: ! STATION=JB1_VLBA STCODE=Jv CONTROL=VEX DBNAME = JODLMKI MOUNT=ALTAZ AX1RATE=15 AX2RATE=10 AX1ACC=0.026 AX2ACC=0.023 AX1LIM=-85,325 AX2LIM=3,89 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 MAXSRCHR=12.0 DISK=MARK5A MEDIADEF=DISK / STATION=JB2_VLBA STCODE=Jv CONTROL=VEX DBNAME = JB_Mk_2 MOUNT=ALTAZ AX1RATE=20.0 AX2RATE=20.0 AX1ACC=0.034 AX2ACC=0.022 AX1LIM=-90,330 AX2LIM=1,90 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / STATION=MEDICINA STCODE=Mc CONTROL=VEX ! huib: latest axis information from 96 TWG in Bologna ! CR: updated from Orlati 8Aug03 DBNAME = MEDICINA MOUNT=ALTAZ AX1RATE=45 AX2RATE=30 AX1ACC=0.82 AX2ACC=0.31 AX1LIM=270,810 AX2LIM=5,88.5 TSETTLE=3 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK / STATION=METSAHOV STCODE=Mh CONTROL=VEX ! huib 12/9/96 previously 'METS' ! CR: 15/10/01 previously 'DBNAME=METSHOVI' ! CR: updated from A.Mujunen 11Aug03 ! CR: NBBC=8 until replacements arrive (30Oct01) DBNAME = METSAHOV MOUNT=ALTAZ AX1RATE=60 AX2RATE=60 AX1ACC=0.25 AX2ACC=0.25 AX1LIM=-55,415 AX2LIM=5,95.0 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / STATION=NOTO STCODE=Nt CONTROL=VEX DBNAME = NOTO MOUNT=ALTAZ AX1RATE=43 AX2RATE=30 AX1LIM=-87,450 AX2LIM=5,85.0 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK ! added horizon limits April 2003 HOR_AZ = 0, 10, 30, 70, 100, 120, 150, 180, 300, 310, 360 HOR_EL = 8, 7, 6, 9, 6.5, 5, 6, 5, 5, 6.5, 7.5 ! email update Cassaro April 2003 (CR 1May03) / ! AGP: 20/09/08 No S2 terminal in Noto ! STATION=NOTO_S2 STCODE=Nt CONTROL=VEX ! DBNAME = NOTO ! MOUNT=ALTAZ AX1RATE=43 AX2RATE=30 AX1LIM=-87,450 AX2LIM=5,85.0 ! TSETTLE=2 DAR=VLBAG RECORDER=S2 NDRIVES=8 NHEADS=1 NBBC=14 ! ! added horizon limits April 2003 ! HOR_AZ = 0, 10, 30, 70, 100, 120, 150, 180, 300, 310, 360 ! HOR_EL = 8, 7, 6, 9, 6.5, 5, 6, 5, 5, 6.5, 7.5 ! email update Cassaro April 2003 (CR 1May03) ! / STATION=ONSALA60 STCODE=On CONTROL=VEX DBNAME = ONSALA60 MOUNT=ALTAZ AX1RATE=180 AX2RATE=57 AX1LIM=270,810 AX2LIM=5,87 AX1ACC=0.3 AX2ACC=0.4 TSETTLE=5 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK / STATION=ONSALA85 STCODE=On CONTROL=VEX ZALIM=88.000 DBNAME = ONSALA85 MOUNT=EQUAT AX1RATE=17.6 AX2RATE=14.7 AX1LIM=-12,12 AX2LIM=-30,84 AX1ACC=0.070 AX2ACC=0.052 TSETTLE=5 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK HOR_AZ = 0 HOR_EL = 6.0 / STATION=SHANGHAI STCODE=Sh CONTROL=VEX ! ! This station is called SESHAN25 in Geodetic database (Huib 270300) ! Huang Xinyong (170300) gives coordinates (which are close): ! X = -2831686.902 Y = 4675733.673 Z = 3275327.665 ! DBNAME = SESHAN25 MOUNT=ALTAZ AX1RATE=60 AX2RATE=36 AX1LIM=-78,430 AX2LIM=5,88.5 AX1ACC=0.5 AX2ACC=0.28 ! Li Bing 8jul2009 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK ! AGP: Jun08 Back to 14 BBCs / ! STATION=SHANG_S2 STCODE=Sh CONTROL=VEX ! huib 21/10/97 inserted S2 recorder. 23/10 elev limits ! mode SHANGHAI ! DBNAME = SESHAN25 ! MOUNT=ALTAZ AX1RATE=30 AX2RATE=18 AX1LIM=-78,425 AX2LIM=5,87.0 ! TSETTLE=2 DAR=VLBAG RECORDER=S2 NDRIVES=8 NHEADS=1 NBBC=8 ! / STATION=TORUN STCODE=Tr CONTROL=VEX ! CR: Slew updated from K.Borkowski, 2003Sep26. DBNAME = TORUN MOUNT=ALTAZ AX1LIM=-80,440 AX2LIM=3,93 AX1RATE=30 AX2RATE=16 AX1ACC=0.05 AX2ACC=0.03 TSETTLE=5 DAR=VLBA4 NDRIVES=1 ! RECORDER=VLBA4 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK ! Use tsettle=15 if the goofy 40s one is retracted. HOR_AZ = 0,360 HOR_EL = 2,2 ! Horizon not blocked to this limit / STATION=TORUN_V STCODE=Tr CONTROL=VEX ! CR: Slew updated from K.Borkowski, 2003Sep26. DBNAME = TORUN MOUNT=ALTAZ AX1LIM=-80,440 AX2LIM=3,93 AX1RATE=30 AX2RATE=16 AX1ACC=0.05 AX2ACC=0.03 TSETTLE=5 DAR=VLBA ! RECORDER=VLBA NDRIVES=1 NHEADS=1 NBBC=8 DISK=MARK5A MEDIADEF=DISK ! Use tsettle=15 if the goofy 40s one is retracted. HOR_AZ = 0,360 HOR_EL = 2,2 ! Horizon not blocked to this limit / ! STATION=WETTZELL STCODE=Wz CONTROL=SNAP !CR: update from Lorant (1Dec00) STATION=WETTZELL STCODE=Wz CONTROL=VEX !LORANT DBNAME = WETTZELL MOUNT=ALTAZ AX1RATE=180 AX2RATE=90 AX1LIM=270,810 AX2LIM=2,89 TSETTLE=2 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK / STATION=WSTRBORK STCODE=Wb CONTROL=VEX ! updated 26Aug03 by Foley (CR: 7Jan04) DBNAME = WB_Tied MOUNT=EQUAT AX1RATE=18 AX2RATE=18 AX1ACC=0.1 AX2ACC=0.1 AX1LIM=-6.0,6.0 AX2LIM=-38,90 TSETTLE=10 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK / STATION=YEBES40M STCODE=Ys CONTROL=VEX ! AGP: May 2008 - New station YEBES40M ! New Azimuth limits from P.de Vicente (AGP 31Oct08) DBNAME = YEBES40M MOUNT=ALTAZ AX1LIM=-60,420 AX2LIM=5,88 AX1RATE=60 AX2RATE=60 TSETTLE=15 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK ! Station has 14 BBCs on VLBA4 rack + VSI-H + Mark5B / STATION=HART STCODE=Hh CONTROL=VEX ZALIM=82.000 DBNAME = HARTRAO MOUNT=EQUAT AX1LIM=-5.86,5.86 AX2LIM=-83,45 AX1RATE=30 AX2RATE=30 AX1ACC=0.071 AX2ACC=0.071 TSETTLE=20 DAR=DBBC DBBCVER=HYBRID DISK=MARK5B MEDIADEF=DISK / STATION=HART15M STCODE=Ht CONTROL=VEX ! from Jon Quick. Added by CR 2013-04-04 DBNAME = HART15M MOUNT=ALTAZ AX1LIM=-185,275 AX2LIM=2,88 AX1RATE=120 AX2RATE=60 AX1ACC=1.3 AX2ACC=1.3 TSETTLE=3 DAR=DBBC DBBCVER=HYBRID DISK=MARK5B MEDIADEF=DISK / ! STATION=HART_S2 STCODE=Hh CONTROL=VEX ZALIM=82.000 ! CR: update from J.Quick (13 Aug 2003) ! DBNAME = HARTRAO ! MOUNT=EQUAT AX1LIM=-5.86,5.86 AX2LIM=-83,45 ! AX1RATE=30 AX2RATE=30 AX1ACC=0.071 AX2ACC=0.071 ! TSETTLE=20 DAR=NONE RECORDER=S2 NDRIVES=8 NHEADS=1 NBBC=4 ! Will have an S2 with a "aussie" DAR, will have FS9 ! / ! ! Other stations. ! ! ! STATION=USSURISK STCODE=Us CONTROL=SNAP ! mode USSURIYSK ! MOUNT=ALTAZ ! AX1RATE= AX2RATE= AX1LIM= AX2LIM= ! TSETTLE=2 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! STATION=URUMQI STCODE=Ur CONTROL=VEX ! Updated to MkIV 04/2000. I am not sure it is known to ! geo database. Coordinates are according to station: ! X = 228310.726 Y = 4631922.805 Z = 4367063.964 DBNAME = URUMQI ! other parameters taken to be the same as Shanghai, except MkIV. ! MOUNT= ALTAZ AX1RATE=30 AX2RATE=18 AX1LIM=-80,450 AX2LIM=5,88 MOUNT= ALTAZ AX1RATE=60 AX2RATE=30 AX1LIM=-80,450 AX2LIM=5,88 ! Yusup Ali 8jul2009 AX1ACC=0.5 AX2ACC=0.5 ! Yusup Ali 8jul2009 TSETTLE=2 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK / !CR: added from Lorant (1Dec00) !LORANT add Matera; many unknowns - MKIV, VLBA4 from Pino Colucci 22/05/00 STATION=MATERA STCODE=Ma CONTROL=VEX ! Next line shows VLBA Correlator database values not used by SCHED: ! DBCODE=MA DBNAME=MATERA AXISTYPE='altz' AXISOFF= 0.0000 DBNAME=MATERA ! X= 4641938.78318 Y= 1393003.02605 Z= 4133325.52288 ! DXDT= -0.00000 DYDT= 0.00000 DZDT= 0.00000 EPOCH=50449 ! FRAME='?? LORANTS first order estimates ' MOUNT=ALTAZ AX1RATE=120 AX2RATE=120 AX1LIM=260,800 AX2LIM=4,88 TSETTLE=2 DAR=MKIV ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK / ! ! Stations no longer in use. Keep data in case useful some day. ! Beware that there are some (eg OV) with the same station codes ! as some others in the active list. ! ! AGP 05112008: Moved here the infor on the YEBES 14m dish STCODE=Yb ! so that it is not cunfused with the YEBES40m ! STATION=YEBES STCODE=Yb CONTROL=VEX !! Recorder and NHEADs updated from Pablo Vicente, Feb 2002 (CR 3Apr02) ! DBNAME = YEBES ! MOUNT=ALTAZ AX1LIM=-354,354 AX2LIM=10,89.9 AX1RATE=60 AX2RATE=60 ! TSETTLE=15 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 ! NBBC=14 DISK=MARK5A MEDIADEF=DISK ! / ! ! STATION=DWINGELO STCODE=Dw CONTROL=SNAP ZALIM=85.000 ! ELEV= 6364624.00 LONG=-006:23:48.12 LAT= 52:37:39.36 ! TSETTLE=2 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! ! STATION=PUSCHINO STCODE=Pu CONTROL=VEX ZALIM=85. ! ! Wild guesses on everything. ! ELEV=500 LONG=-37:55:00 LAT=56:00:00 ! Changed to S2 by Huib and updated name after e-mail Novikov 20/03/97 ! TSETTLE=2 DAR=NONE RECORDER=S2 NDRIVES=8 NHEADS=1 NBBC=14 ! / ! AGP 051108: Kept previous information for Defford ! The only difference is TSETTLE=2 cf TSETTLE=10 in the entires above ! Waiting to hear from JB people ! STATION=DEFFORD STCODE=De CONTROL=SN50 ZALIM=88.0 ! Not in correlator data base. ! ELEV= 41.0 LONG=02:08:35 LAT=52:06:01 ! TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=1 ! NBBC=14 DISK=MARK5A MEDIADEF=DISK ! / ! ================================================ ! The following are mm stations added 15 Nov 2005 ! ================================================ STATION=PICOVEL STCODE=PV CONTROL=VEX DBNAME = PICOVEL ! X= 5088969.8 Y= -301682.6 Z= 3825016.0 MOUNT=ALTAZ AX1RATE=30 AX2RATE=30 AX1LIM=-90,450 AX2LIM=9,89 TSETTLE=2 DAR=VLBA4 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK / STATION=PDBURE STCODE=PB CONTROL=VEX DBNAME = PDBURE ! Position of Pad W00. X= 4524000.43 Y= 468042.14 Z= 4460309.76 MOUNT=ALTAZ AX1RATE=30 AX2RATE=30 AX1LIM=-90,450 AX2LIM=9,89 TSETTLE=2 DAR=MKIV ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / !==================================================== !The following are QUASAR stations (Russia) ! Should they go to geodecy stations ? ! Positions from D. Graham (Sep 2008) !==================================================== ! STATION=BADARY STCODE=Bd CONTROL=VEX ZALIM=88.0 DBNAME=BADARY MOUNT=ALTAZ AX1LIM=278,802 AX2LIM=30,80 AX1RATE=60 AX2RATE=30 AX1ACC=0.05 AX2ACC=0.05 TSETTLE=5 DAR=R1002 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK / STATION=SVETLOE STCODE=Sv CONTROL=VEX ZALIM=88.0 DBNAME=SVETLOE MOUNT=ALTAZ AX1LIM=278,802 AX2LIM=30,80 AX1RATE=60 AX2RATE=30 AX1ACC=0.05 AX2ACC=0.05 TSETTLE=5 DAR=R1002 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK / STATION=ZELENCHK STCODE=Zc CONTROL=VEX ZALIM=88.0 DBNAME=ZELENCHK MOUNT=ALTAZ AX1LIM=278,802 AX2LIM=30,80 AX1RATE=60 AX2RATE=32 AX1ACC=0.05 AX2ACC=0.05 TSETTLE=5 DAR=R1002 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK / ! =================================================== ! The following are Chinese stations added 2 Sep 2009 ! =================================================== ! STATION=KUNMING STCODE=Km CONTROL=VEX ! info from Hao Longfei 11may2009 DBNAME = KUNMING MOUNT= ALTAZ AX1RATE=60 AX2RATE=30 AX1LIM=-88,447 AX2LIM=5,90 AX1ACC=0.5 AX2ACC=0.3 ! Hao Longfei 8jul2009 TSETTLE=2 DAR=VLBA4 ! RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=8 DISK=MARK5A MEDIADEF=DISK / STATION=MIYUN50 DBNAME=MIYUN50 STCODE=My CONTROL=VEX ! From ZHU Xinying 6 July 2009. MOUNT= ALTAZ AX1RATE=60 AX2RATE=30 AX1LIM=-270,270 AX2LIM=7,89 AX1ACC=0.5 AX2ACC=0.3 ! Zhu Xinying 8jul2009 TSETTLE=2 DAR=VLBA4 NBBC=8 DISK=MARK5A MEDIADEF=DISK / ! ! ===================================================================== ! The following entries in the SCHED stations catalog are stations that ! are members of the Asia Pacific Telescope. ! These stations are maintained in file stations_APT.dat. ! ===================================================================== ! 2004 July 29 - ATNF broken out. See ../Master_ATNF. RCW. ! Commented out S2 (Usuda) July 22, 2010 RCW. ! ! From Victor Migenes Nov 96 34m antenna STATION=KASHIM34 STCODE=Ks CONTROL=VSOP DBNAME = KASHIM34 MOUNT=ALTAZ AX1RATE=40 AX2RATE=45 ax1lim=90,630 AX2LIM=7,88 TSETTLE=20 DAR=VSOP RECORDER=VSOP NDRIVES=1 NHEADS=1 / ! From Victor Migenes Nov 96 6m antenna STATION=KAGOSIMA STCODE=Kg CONTROL=VSOP MOUNT=ALTAZ AX1RATE=60 AX2RATE=60 ax1lim=270,810 AX2LIM=10,88 X=-3537007.8900 Y=4140258.0200 Z=3309951.0700 TSETTLE=2 DAR=VSOP RECORDER=VSOP NDRIVES=1 NHEADS=1 / ! From Victor Migenes Nov 96 10m antenna STATION=MIZNA010 STCODE=Mz CONTROL=VSOP DBNAME = MIZNAO10 MOUNT=ALTAZ AX1RATE=180 AX2RATE=180 ax1lim=-87,447 AX2LIM=3,88 TSETTLE=2 DAR=VSOP RECORDER=VSOP NDRIVES=1 NHEADS=1 / ! Victor Migenes Nov 96 gave XYZ. Also gave AX1LIM=270,810. ! This information is surely out of date. Commented July 22, 2010 RCW. ! STATION=NOBEYA45 STCODE=Nb CONTROL=SNAP ! MOUNT=ALTAZ AX1RATE=18 AX2RATE=18 AX1LIM=120,690 AX2LIM=11,80 ! X=-3871023.4900 Y=3428106.8000 Z=3724039.5000 ! TSETTLE=20 DAR=MKIII RECORDER=MKIII NDRIVES=1 NHEADS=1 NBBC=14 ! / ! Usuda info from Phil Edwards 15jun99. ! Based on email from Kenta Fujisawa. ! DBNAME changed Nov. 2010 to match GSFC solutions STATION=USUDAVS STCODE=Ud CONTROL=VSOP DBNAME = USUDA64 DAR=VSOP RECORDER=VSOP NDRIVES=1 NHEADS=1 MOUNT=ALTAZ AX1RATE=18 AX2RATE=18 AX1LIM=-90,450 AX2LIM=7.6,85 TSETTLE=20 HOR_AZ = 0, 5, 10, 15, 20,120,125,130,135,140,145,150,155,160, 165,170,175,185,190,195,200,205,210,215,220,255,260,270, 275,280,285,290,295,300,305,310,315,320,325,330,335,340, 345,350,355,360 HOR_EL = 7.6,7.6,7.6,7.6,7.6,7.6,7.6,7.6, 8, 9, 10, 10, 10, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 11, 10, 10 / STATION=USUDAVL STCODE=Ud CONTROL=VEX DBNAME = USUDA64 DAR=VLBAG RECORDER=VLBA NDRIVES=1 NHEADS=1 NBBC=14 MOUNT=ALTAZ AX1RATE=18 AX2RATE=18 AX1LIM=-90,450 AX2LIM=7.6,85 TSETTLE=20 HOR_AZ = 0, 5, 10, 15, 20,120,125,130,135,140,145,150,155,160, 165,170,175,185,190,195,200,205,210,215,220,255,260,270, 275,280,285,290,295,300,305,310,315,320,325,330,335,340, 345,350,355,360 HOR_EL = 7.6,7.6,7.6,7.6,7.6,7.6,7.6,7.6, 8, 9, 10, 10, 10, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 11, 10, 10 / ! The following are VERA stations forwarded from Cormac Reynolds from ! Simon Ellingsen from Mareki Honma. See Reynolds email of Jan. 3, 2010. ! The stations are Mizusawa and Yamaguchi. RCW March 22, 2010. ! Note that there are entries that correspond in locations.dat. STATION=VERAMZSW STCODE=Vm CONTROL=VEX DBNAME = VERAMZSW MOUNT=ALTAZ AX1RATE=126 AX2RATE=126 AX1ACC=2.10 AX2ACC=2.10 ! rate in deg/min, acceralation in deg/s/s AX1LIM=-90,450 AX2LIM=5,85 TSETTLE=10 DAR=VERA RECORDER=VERA NDRIVES=1 NHEADS=1 NBBC=16 DISK=MARK5B MEDIADEF=DISK / STATION=YAMAGU32 STCODE=Ym CONTROL=VEX DBNAME = YAMAGU32 MOUNT=ALTAZ AX1RATE=15 AX2RATE=15 AX1ACC=0.25 AX2ACC=0.25 ! rate in deg/min, acceralation in deg/s/s AX1LIM=2,358 AX2LIM=5,85 TSETTLE=10 DAR=VERA RECORDER=VERA NDRIVES=1 NHEADS=1 NBBC=16 DISK=MARK5B MEDIADEF=DISK / ! ! This vera station appears in the 2010a stations solutions. ! Parameters set same as VERAMZSW in ignorance of any differences. ! STATION=VERAISGK STCODE=Vs CONTROL=VEX DBNAME = VERAISGK MOUNT=ALTAZ AX1RATE=126 AX2RATE=126 AX1ACC=2.10 AX2ACC=2.10 ! rate in deg/min, acceralation in deg/s/s AX1LIM=-90,450 AX2LIM=5,85 TSETTLE=10 DAR=VERA RECORDER=VERA NDRIVES=1 NHEADS=1 NBBC=16 DISK=MARK5B MEDIADEF=DISK / ! ===================================================================== ! The following entries in the SCHED stations catalog are for NASA Deep ! Space Network (DSN) antennas. ! These stations are maintained in file stations_DSN.dat. ! ===================================================================== ! ! Coordinates where given here are geodetic, from DSN Radio Astronomy ! web site at http://DSNra.jpl.nasa.gov ! ! Updated by Jim Ulvestad, 21 Nov. 1997, based on information ! from Chuck Naudet and Valery Altunin. NHEADS changed to 1 ! for 70 and 34m, based on further information, 8 Dec. 1997 ! ! Some az limit updates from Cristina Garcia Miro via Cormac Reynolds. ! Installed 14 Sep 2004 RCW. ! ! Robledo to Mark5 19jan2006 RCW based on Cormac Reynolds email. ! ! Added DSS34 with temporary reduced slew rate. Had to comment it all out ! because I don't have a position. But could be put back when XYZ is ! available. The temporary slew rate went away long before Nov 28, 2012 ! when I got an email from Shinji Horiuchi (cdscc.nasa.gov) saying it ! is back to 0.8 degree/sec. ! ! Adjusted slew speeds and added accelerations based on 810-005 document ! on "Antenna Positioning" from the DSN web site. June 15, 2009. RCW ! Also really removed S2 ! ! DSS54 moved from stations_JIVE.dat Oct. 15, 2009. RCW. ! ! Trying to rationalize the DSN stations, and switch to DSS style names ! as much as possible given names from the geo solutions. Oct 2011, RCW. ! ! Goldstone: ! All antennas (wikipedia and SCHED files): ! Name Positions used Description ! DSS13 geo solution "Venus" 34m BWG ! DSS14 locations_DSN.dat "Mars" 70m ! DSS15 geo solution "Uranus" 34m HEF Two date ranges. ! DSS24,24,26 none "Apollo" 34m BWG (array?) ! DSS27,28 none "Gemini" 34m BWG (array?) ! Not in Wikipedia ! GOLDVENU geo solution Old DSS13. ! GOLDS_TS locations_DSN.dat VSOP tracking station ! ! ! I will not provide station data for GOLDVENU because I think it ! is no longer in use. The geo solution is based on 1981-1991 data. STATION=DSS13 STCODE=Go CONTROL=VEX ! There is confusion between GOLDVENU and DSS13. ! I think DSS13 is the new 34m BWG and GOLDVENU is the old 26m ! From old catalog: ELEV= 6370000.00 LONG= 116:47:40.04 LAT= 35:14:49.79 ! Now both are in the geodetic solution. DBNAME=DSS13 MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=270,810 AX2LIM=6,88 TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=1 NHEADS=1 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=DSS14 STCODE=Go CONTROL=VEX ! Old SCHED name GOLD70 - Goldstone 70m Goldmars. DBNAME = DSS14 MOUNT=ALTAZ AX1RATE=15 AX2RATE=15 AX1LIM=135,675 AX2LIM=6,86 AX1ACC=0.2,2.5 AX2ACC=0.2,2.5 TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=2 NHEADS=1 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=DSS15 STCODE=Go CONTROL=VEX ! Old SCHED name GOLDHEF - Goldstone 34m HEF DBNAME = DSS15 MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=270,720 AX2LIM=6,88 AX1ACC=0.4,5.0 AX2ACC=0.4,5.0 TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=2 NHEADS=1 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / ! Tidbinbilla: ! All antennas (wikipedia and SCHED files): ! Name Positions used Description ! DSS-34 In this file 34m BWG ! DSS-43 locations_DSN.dat Was 64m, now 70m ** USE TIDBIN64 ** ! DSS-45 geo solution 34m ! DSS-46 none 26m decommissioned 2009 ! DSS-49 geo solution Is the Parkes 64m. Find under "PARKES" ! Not in Wikipedia ! TIDBIN64 geo solution DSS43. Use this position. ! TDBIN_TS locations_DSN.dat VSOP tracking station STATION=DSS34 STCODE=Ti CONTROL=VEX ! DSS34 - Australia 34m BWG antenna similar to DSS45 ! Temporary azimuth slew limit temporarily low (June 2009 RCW - ! From email from Shinji Horiuchi. Put back to 48 Nov 28, 2012.) ! DBNAME = DSS34 Not yet in correlator data base. ! ITRF93 Epoch 2003 from JPL document 810-005, Rev.E. ! Epoch is 2003.0. Rate is from DSS43 ! X=-4461147.093 Y=2682439.239 Z=-3674393.133 ! DXDT= -0.03802 DYDT= -0.00205 DZDT= 0.04229 EPOCH=52640 ! FRAME='ITRF93 from JPL doc 810-005' DBNAME = DSS34 MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=180,630 AX2LIM=6,88 AX1ACC=0.4,5.0 AX2ACC=0.4,5.0 TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=2 NHEADS=1 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=DSS43 STCODE=Ti CONTROL=VEX ! Old SCHED name TID70 - Australia 70m. ! Change to use use TIDBIN64 from geodetic solutions, not old ! DSS43 1998 position DBNAME = TIDBIN64 MOUNT=ALTAZ AX1RATE=15 AX2RATE=15 AX1LIM=230,759.8 AX2LIM=6,86 AX1ACC=0.2,2.5 AX2ACC=0.2,2.5 TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=2 NHEADS=1 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=DSS45 STCODE=Ti CONTROL=VEX ! Old SCHED name TID34 (confusing with DSS34) - Australia 34m HEF DBNAME = DSS45 MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=180,630 AX2LIM=6,88 AX1ACC=0.4,5.0 AX2ACC=0.4,5.0 TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=2 NHEADS=1 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / ! ! Robledo: ! All antennas (wikipedia and SCHED files): ! Name Positions used Description ! DSS-54 locations_DSN.dat 34m BWG ! DSS-55 None 34m BWG ! DSS-63 locations_DSN.dat Was 64m, now 70m. ! DSS-65 geo solution 34m HEF Some name confusion. ! DSS-66 None 26m Moved in 1983, Shut down in 1985. ! Not in wikipedia: ! ROBLED_32 geo solution One experiment. Old dead antenna? ! ROBLED_TS locations_DSN.dat VSOP tracking station. STATION=DSS63 STCODE=Ro CONTROL=VEX ! Madrid 70m Old SCHED name ROB70 DBNAME = DSS63 ! Update from Esther Mol, 17 May 2005 via Cormac: ! Changes were addition of acceleration, change to 1 drive ! and new tsettle. MOUNT=ALTAZ AX1RATE=15 AX2RATE=15 AX1LIM=140,669 AX2LIM=6,86 AX1ACC=0.20,2.5 AX2ACC=0.20, 2.5 TSETTLE=10 DAR=MKIV RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=DSS65 STCODE=Ro CONTROL=VEX ! Madrid 34m HEF. Old SCHED name ROB34 DBNAME = DSS65A ! Note that this antenna was moved about 61 meters around ! July 3, 2005. At the new position, it is sometimes ! called DSS64. The up-to-date position in locations.dat is ! the one called DSS65A. I modified this from DSS65 on Oct 10, ! 2011 based on the date ranges in the GSFC and RFC catalogs. ! Update from Esther Mol, 17 May 2005 via Cormac: ! Change was to change to 1 drive and new tsettle. ! Note DSS-54 and DSS-55 are BWG 34m antennas at Madrid. ! Original version had AX1RATE=12. Almost certainly wrong. MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=-88,358 AX2LIM=6,88 AX1ACC=0.4,5.0 AX2ACC=0.4,5.0 TSETTLE=10 DAR=MKIV RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=DSS54 STCODE=Ro CONTROL=VEX ! Moved from stations_JIVE.dat 2009 Oct 15 ! Madrid 34m BWG Old SCHED name ROB34BWG DBNAME = DSS54 ! Update from Cristina Garcia, 16 Feb 2009 via Campbell: ! New antenna available for 7mm MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=-90,359 AX2LIM=6,88 TSETTLE=10 DAR=MKIV RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / ! ! ===================================================================== ! The following entries in the SCHED stations catalog are stations that ! are members of the Australian Long Basline Array (LBA) ! These stations are maintained in file stations_ATNF.dat. ! ===================================================================== ! Changed TID70_S2 to use DBNAME=TIDBIN64 for the position while trying ! to rationalize DSN names. That seems to be the name in the more recent ! geodetic solutions. Oct 2011 RCW. ! March 12, 2013 Added WARKWORT with info from Stuart Weston email of ! March 6, 2013. RCW. ! STATION=ATCA STCODE=At CONTROL=VEX ! All info from Phil Edwards, e-mail 09NOV96 MOUNT=ALTAZ AX1RATE=40 AX2RATE=20 AX1LIM=-150,330 AX2LIM=12.0,89.0 AX1ACC=0.222 AX2ACC=0.222 ! ELEV= 217.00 LONG= -149:34:12.00 LAT=-30:18:36.00 DBNAME = AT_W104 ! W104 is the default pad, but usage varies. TSETTLE=3 DAR=LBA DISK=LBADR NDRIVES=1 NBBC=4 / STATION=CEDUNA STCODE=Cd CONTROL=VEX ! All info from Phil Edwards, e-mail 09NOV96 ! Rates and limits from Peter McCulloch e-mail 19-may-97 ! More info from Phil Edwards email 15oct97 MOUNT=ALTAZ AX1RATE=40 AX2RATE=40 AX1LIM= -170,300 AX2LIM=5.0,89.0 DBNAME = CEDUNA AX1ACC=0.02778 AX2ACC=0.02778 ! ELEV= 100.00 LONG= -133:48:35.38 LAT=-31:52:00.00 TSETTLE=2 DAR=LBA DISK=LBADR NDRIVES=1 NBBC=2 / STATION=HOB_MK5 STCODE=Ho CONTROL=VEX ! position from SKED catalog. DBNAME = HOBART26 MOUNT=XYEW AX1RATE=40 AX2RATE=40 AX1ACC=0.02778 AX2ACC=0.02778 AX1LIM=-83.05,83.05, -78.05,78.05 AX2LIM=-71.05,71.05, -75.95,75.95 TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5A MEDIADEF=DISK / STATION=HOBART STCODE=Ho CONTROL=VEX ! position from SKED catalog. DBNAME = HOBART26 MOUNT=XYEW AX1RATE=40 AX2RATE=40 AX1ACC=0.02778 AX2ACC=0.02778 AX1LIM=-83.05,83.05, -78.05,78.05 AX2LIM=-71.05,71.05, -75.95,75.95 TSETTLE=2 DAR=LBA DISK=LBADR NDRIVES=1 NBBC=2 / STATION=MOPRA STCODE=Mp CONTROL=VEX ! All info from Phil Edwards, e-mail 09NOV96 MOUNT=ALTAZ AX1RATE=38 AX2RATE=19 AX1LIM=-150,330 AX2LIM=12.0,89.0 AX1ACC=0.222 AX2ACC=0.222 ! ELEV= 840.00 LONG= -149:04:12.00 LAT= -31:18:00.00 DBNAME = MOPRA TSETTLE=3 DAR=LBA DISK=LBADR NDRIVES=1 NBBC=4 / STATION=PARK_MK5 STCODE=Pa CONTROL=VEX DBNAME = PARKES MOUNT=ALTAZ AX1RATE=22 AX2RATE=12 AX1LIM=-155,295 AX2LIM=30.5,89.5 AX1ACC=0.033 AX2ACC=0.017 TSETTLE=5 DAR=MKIV RECORDER=MKIV NDRIVES=1 NHEADS=2 NBBC=14 DISK=MARK5B MEDIADEF=DISK / STATION=PARKES STCODE=Pa CONTROL=VEX DBNAME = PARKES MOUNT=ALTAZ AX1RATE=22 AX2RATE=12 AX1LIM=-155,295 AX2LIM=30.5,89.5 AX1ACC=0.033 AX2ACC=0.017 TSETTLE=2 DAR=LBA DISK=LBADR NDRIVES=1 NHEADS=1 NBBC=4 / STATION=DSS34LBA STCODE=Ti CONTROL=VEX ! DSS45 - Australia 34m HEF, LBA recorder DBNAME = DSS34 MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=180,630 AX2LIM=6,88 AX1ACC=0.4,5.0 AX2ACC=0.4,5.0 TSETTLE=2 DAR=LBA DISK=LBADR NHEADS=1 NBBC=2 / STATION=DSS43LBA STCODE=Ti CONTROL=VEX ! DSS43 - Australia 70m, LBA recorder DBNAME = TIDBIN64 MOUNT=ALTAZ AX1RATE=15 AX2RATE=15 AX1LIM=230,760 AX2LIM=6,86 AX1ACC=0.2,2.5 AX2ACC=0.2,2.5 TSETTLE=2 DAR=LBA DISK=LBADR NDRIVES=1 NBBC=2 / STATION=DSS45LBA STCODE=Ti CONTROL=VEX ! DSS45 - Australia 34m HEF, LBA recorder DBNAME = DSS45 MOUNT=ALTAZ AX1RATE=48 AX2RATE=48 AX1LIM=180,630 AX2LIM=6,88 AX1ACC=0.4,5.0 AX2ACC=0.4,5.0 TSETTLE=2 DAR=LBA DISK=LBADR NHEADS=1 NBBC=2 / ! Info from March 6, 2013 email from Stuart Weston. STATION=WARK12M STCODE=Ww CONTROL=VEX ! AUT University 12m, Mk5B recorder DBNAME=WARK12M MOUNT=ALTAZ AX1RATE=600 AX2RATE=60 AX1LIM=-270,270 AX2LIM=7,88 AX1ACC=1.3 AX2ACC=1.3 TSETTLE=2 DAR=DBBC DBBCVER=ASTRO DISK=MARK5B MEDIADEF=DISK / STATION=WW_LBA STCODE=Ww CONTROL=VEX ! All info assembled by Chris Phillips from various sources ! This is the Wark12M with the LBA recorder. ! This recorder is not currently available. MOUNT=ALTAZ AX1RATE=600 AX2RATE=60 AX1LIM=-270,270 AX2LIM=7,88 DBNAME = WARK12M AX1ACC=1.3 AX2ACC=1.3 TSETTLE=2 DAR=LBA DISK=LBADR NDRIVES=1 NBBC=2 / STATION=ASKAP STCODE=Ak CONTROL=VEX ! All info assembled by Chris Phillips from various sources ! Acceleration is fake MOUNT=ALTAZ AX1RATE=180 AX2RATE=60 AX1LIM= -180,360 AX2LIM=15.4,88 DBNAME = ASKAP29 AX1ACC=3 AX2ACC=1 TSETTLE=2 DAR=LBA DISK=LBADR NDRIVES=1 NBBC=4 / STATION=KATHERIN STCODE=Ke CONTROL=VEX ! from Jim Lovell MOUNT=ALTAZ AX1RATE=300 AX2RATE=75 AX1LIM= -270,270 AX2LIM=5,88.5 DBNAME = KATHERIN AX1ACC=1.3 AX2ACC=1.3 TSETTLE=2 DAR=DBBC DISK=MARK5B DBBCVER=ASTRO / STATION=YARRAGAD STCODE=Yg CONTROL=VEX ! from Jim Lovell MOUNT=ALTAZ AX1RATE=300 AX2RATE=75 AX1LIM= -270,270 AX2LIM=5,88.5 DBNAME = YARRAGAD AX1ACC=1.3 AX2ACC=1.3 TSETTLE=2 DAR=DBBC DISK=MARK5B DBBCVER=ASTRO / ! ! ===================================================================== ! The following entries in the SCHED stations catalog are for stations ! mainly used in CMVA observations. ! These stations are maintained in file stations_mm.dat. ! Some updates based on Krichbaum email of 18sep2001. RCW ! PDBURE added based on Krichbaum email of 22sep2004. RCW ! ===================================================================== ! Actually none of these stations are in common use now (2005) ! STATION=HAYSTACK STCODE=Hs CONTROL=VEX DBNAME = HAYSTACK MOUNT=ALTAZ AX1RATE=120 AX2RATE=120 AX1LIM=0,360 AX2LIM=5,88 TSETTLE=2 DAR=MKIV ! RECORDER=MKIV NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK NBBC=14 / ! Kitt Peak millimeter antenna STATION=KITTPEAK STCODE=Km CONTROL=VLBA DBNAME = KP12 ! X= -1995954.40 Y= -5037389.40 Z= 3357044.30 MOUNT=ALTAZ AX1RATE=14 AX2RATE=14 AX1LIM=270,690 AX2LIM=15,88 TSETTLE=2 DAR=VLBA ! RECORDER=VLBA NDRIVES=2 NHEADS=1 DISK=MARK5A MEDIADEF=DISK NBBC=8 / ! Clearly out of date info. July 22, 2010 RCW. ! STATION=QUAB STCODE=Qb CONTROL=VLBA ! MOUNT=ALTAZ AX1RATE=60 AX2RATE=60 AX1LIM=270,810 AX2LIM=15,88 ! ELEV= 306.00 LONG= 072:20:40.56 LAT= 42:23:33.36 ! TSETTLE=2 DAR=MKIII ! RECORDER=MKIII NDRIVES=1 NHEADS=1 ! DISK=MARK5A MEDIADEF=DISK NBBC=14 ! / ! PDBURE and PICOVEL moved to Master_JIVE ! Antennas moved to CARMA ! STATION=OVRO-MM STCODE=Om CONTROL=VLBA ! DBNAME = OVRO_MMA ! ELEV= 6371610.00 LONG= 118:16:56.75 LAT= 37:02:47.52 ! MOUNT=ALTAZ AX1RATE=14 AX2RATE=14 AX1LIM=270,690 AX2LIM=14,88 ! TSETTLE=2 DAR=VLBA RECORDER=VLBA NDRIVES=2 NHEADS=1 NBBC=8 ! Uses the recording system at VLBA_OV ! / ! Antennas moved to CARMA ! STATION=HC-MM STCODE=Hc CONTROL=SNAP ! Warning, dbname=hatcreek would get old 25m, I think. ! MOUNT=ALTAZ AX1RATE=30 AX2RATE=18 AX1LIM=-90,450 AX2LIM=15,90 ! ELEV= 6370117.00 LONG= 121:28:23.99 LAT= 40:37:39.56 ! TSETTLE=2 DAR=MKIV RECORDER=MKIV NDRIVES=1 NHEADS=1 NBBC=14 ! / ! No longer doing VLBI. ! STATION=SEST STCODE=LS CONTROL=VEX ! DBNAME = SEST ! ELEV= 2412.33 LONG= 070:43:56.58 LAT=-29:15:47.60 ! MOUNT=ALTAZ AX1RATE=60 AX2RATE=60 AX1LIM=270.0,810.0 AX2LIM=5,88 ! TSETTLE=2 DAR=VLBA RECORDER=VLBA NDRIVES=1 NHEADS=1 NBBC=14 ! / ! ! ===================================================================== ! The following entries in the SCHED stations catalog are for stations ! mainly used in geodesy observations. ! These stations are maintained in file stations_geodesy.dat. ! ===================================================================== ! STATION=ALGOPARK STCODE=Ap CONTROL=VEX ! huib 12/9/96 changed 2-letter code to Ap ! Actually a master equatorial system so slews more complicated. DBNAME = ALGOPARK MOUNT=ALTAZ AX1RATE=24.4 AX2RATE=9.4 AX1LIM=41,454 AX2LIM=8.8,86.8 TSETTLE=2 DAR=VLBA4 NBBC=14 ! RECORDER=VLBA4 NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=GILCREEK STCODE=Gc CONTROL=VEX ZALIM=88.000 DBNAME = GILCREEK MOUNT=XYNS AX1RATE=60 AX2RATE=60 AX1LIM=-86,86 AX2LIM=-73.5,73.5 TSETTLE=2 DAR=VLBA4 NBBC=14 ! RECORDER=VLBA NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=KOKEE STCODE=Kk CONTROL=VEX ZALIM=88.000 DBNAME = KOKEE MOUNT=ALTAZ AX1RATE=120 AX2RATE=120 AX1LIM=270,810 AX2LIM=0,89.7 TSETTLE=2 DAR=VLBA4 NBBC=14 ! RECORDER=VLBA NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=FORTLEZA STCODE=Ft CONTROL=VEX ZALIM=88.000 DBNAME = FORTLEZA MOUNT=ALTAZ AX1RATE=40 AX2RATE=20 AX1LIM=171,709 AX2LIM=5,88 TSETTLE=2 DAR=MKIV NBBC=14 ! RECORDER=MKIV NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=NRAO20 STCODE=Gn CONTROL=VEX ZALIM=88.000 DBNAME = NRAO20 MOUNT=ALTAZ AX1RATE=120 AX2RATE=120 AX1LIM=270,810 AX2LIM=0,89.7 TSETTLE=2 DAR=VLBAG NBBC=14 ! RECORDER=VLBA NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=NYALES20 STCODE=Ny CONTROL=VEX ZALIM=88.000 DBNAME = NYALES20 MOUNT=ALTAZ AX1RATE=120 AX2RATE=120 AX1LIM=260,809 AX2LIM=0,89.7 TSETTLE=2 DAR=MKIV NBBC=14 ! RECORDER=MKIV NDRIVES=1 NHEADS=1 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / STATION=WESTFORD STCODE=Wf CONTROL=VEX DBNAME = WESTFORD MOUNT=ALTAZ AX1RATE=200.0 AX2RATE=120.0 AX1LIM=100.0,460.0 AX2LIM=4.0,87.2 TSETTLE=10 DAR=MKIV NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP / ! Most information pulled from rdv65.skd from August 2007. ! TSETTLE is a guess that is probably wrong. STATION=TIGOCONC STCODE=TC CONTROL=VEX DBNAME=TIGOCONC MOUNT=ALTAZ AX1RATE=180.0 AX2RATE=90.0 AX1LIM=276.0,916.0 AX2LIM=0.0,90.0 TSETTLE=2 DAR=VLBA4 NBBC=14 DISK=MARK5B MEDIADEF=DISK TSCAL=GAP ! This was actually a step mask in SKED, but it's used here as a segment mask. ! To make that reasonable, a second entry 1 degree less than the start of the next ! step has been added for each segment. HOR_AZ = 0, 20, 21, 105, 106, 122, 123, 130, 131, 149, 150, 193, 194, 214, 215, 223, 224, 240, 241, 265, 266, 283, 284, 347, 348, 351, 352, 359, 360 HOR_EL = 2, 2, 8, 2, 4, 4, 12, 12, 8, 8, 6, 6, 10, 10, 8, 8, 5, 5, 4, 4, 8, 8, 8, 8, 2, 2, 4, 4, 2 / ! Here be wild guesses. ! TSETTLE is a guess that is probably wrong. ! Some information from SKED catalogs. ! Horizon is a guess - not available in SKED file. Probably wrong. STATION=OHIGGINS STCODE=OH CONTROL=VEX DBNAME=OHIGGINS MOUNT=ALTAZ AX1RATE=90.0 AX2RATE=90.0 AX1LIM=270.0,630.0 AX2LIM=0.0,88.0 TSETTLE=2 DAR=VLBA4 NBBC=14 DISK=MARK5A MEDIADEF=DISK TSCAL=GAP HOR_AZ = 0, 360 HOR_EL = 2, 2 /