ARM TO ARM AZIMUTH ENCODER CHANGE INSTRUCTION

No longer applicable with new encoder electronics, set arm
with menu.

South to West change = 28.9943° (28°59'40") ('4244744)
1. Set Azimuth at encoder bits 3,6,7,8,9,12,15,17,MSB
2. Turn encoder to read 0

West to South change = +28.9943 (28°59'40') ('3533033)
1. Set Azimuth at encoder bits 1,2,4,5,10,11,13,14,16,18,19,20
2. Turn encoder to read 0

South to East change = +30° ('3525252)
1. Set Azimuth at encoder bits 2,4,6,8,10,12,14,16,18,19,20
2. Turn encoder to read 0

East to South change = -30° ('4252525)
1. Set Azimuth at encoder bits 2,3,5,7,9,11,13,15,17,MSB
2. Turn encoder to read 0

South to North change = +90° ('3000000)
1. Set Azimuth at encoder bits 19,20
2. Turn encoder to read 0


North to South change = -90° ('5000000)
1. Set Azimuth at encoder bits 19,MSB
2. Turn Encoder to read 0.

North to West change = -118.9943° (118°59'40") ('5244744)
1. Set Azimuth at encoder bits 3,6,7.8,9,12,15,17,19,MSB
2. Turn Encoder to read 0

West to North change = +118.9943° (118°59'40") ('2533033)
1. Set Azimuth at Encoder Bits 3,4,5,10,11,13,14,16,18,20
2. Turn Encoder to read 0

North to East change = -60° ('4525252)
0. 1. Set Azimuth to Encoder Bits 1,2.4,6,8,10,12,14,16,18,MSB
2. Turn Encoder to read 0

East to North change = +60° ('3252525)
1. Set Azimuth to Encoder Bits 2,3,5,7,9,11,13,15,17,19,20
2. Turn Encoder to read 0

East to West change = -58.9943° (58°59'40") ('451471)
1. Set Azimuth to Encoder Bits 2,4.5,6,9,10,11,12,13,16,18,MSB
2. Turn Encoder to read 0

West to East change = +58.9943° (58°59'40") ('3260306)
1. Set Azimuth to Encoder Bits 2.3,7,8,14,15,17,19,20
2. Turn Encoder to read 0

NOTE: Ensure Lead/Lag switch are in proper position