! This example is for an EVN Mark5 observation.
! Warning - this has a vlba station using MARK5A.  That is no longer
! possible.


! A special station catalog was used originally because Mark5 was not
! really available in VEX at first.  But now the standard catalogs
! are used.

! This started out as an early Mark5 test and used the TAPEINI
! section to set the media to disk at a few sites.  Disk is now
! standard and the TAPEINI sections are no longer supported, so
! it is now just another example of a valid schedule. 
! July 21, 2010  RCW.

!debug
!VEXTEST  Commenting this out turned on adaptive "tapemotion"
!----------------------------------------------------------------------
!  Network Monitoring Experiment schedule
!----------------------------------------------------------------------
!
NOTE3 "This is a Mk5 experiment"

!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
! Code has G on end to distinguish it from egmk5vlba.key
!
EXPCODE = 'MK5VXG'
!
! 
VERSION = 2.1
EXPT 'Network Monitoring Expt - Mk5 test'
PINAME = 'Cormac'
ADDRESS1 = 'JIVE' 
EMAIL = 'reynolds@jive.nl'
PHONE = '+31-521-596512'
OBSPHONE = '+31-521-596512'
!

!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
OBSTYPE=MKIV 
CORREL=JIVE 
CORSHIP1='Cormac'
CORPOL=ON
CORAVG=2 
CORCHAN=16 
CORWTFN=UNIFORM 
CORTAPE=DAT 
CORNANT=11
CORNOTE1= "Both 3C84 and DA193 are good fringe-finders."

! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
OVERWRIT 
SUMITEM=el1,early,disk,dwell
!
! ==========================================================
! ============ Source and Station Catalogs  ================
! ==========================================================
! Use the catalogs for the new systems (the _RDBE versions)
! Changed March 17, 2014.
!  srcfile can be sources.gsfc or sources.rfc.  gsfc has more 
!  aliases (needed here) and rfc (Petrov) has more sources.
srcfile = $SCHED/catalogs/sources.gsfc
stafile = $SCHED/catalogs/stations_RDBE.dat
freqfile = $SCHED/catalogs/freq_RDBE.dat

! ==========================================================
! ======================== Setups  =========================
! ==========================================================

! Originally this file had FREQREF=1642.49, but that cannot be reached
! by the RDBE in use at EB_RDBE.  So it was switched to 1642.24, which
! is the lowest offset that can be reached on both MKIV and RDBE 
! systems.

SETINI = NME-MK5.18CM / 
  FREQREF=1642.25
  NETSIDE=u,u,u,u
  FREQOFF=0.0,0.0,8.0,8.0
  BBFILT=8.0 
  NCHAN=4
  POL= DUAL
  BITS=2 
  BARREL=ROLL_OFF /
ENDSET /

YEAR  = 2003
MONTH = 2
DAY   = 25 
START = 13:30:00 


stations= medicina, noto, eflsberg, jodrell2, EB_RDBE, wstrbork, VLBA_PT

setup = NME-MK5.18CM



! F1
GAP = 0:00 SOURCE = 'DA193' dur = 22:00 /

! R2


! F3
GAP = 3:00 SOURCE = 'DA193' dur = 11:00 /
GAP = 5:00 SOURCE = 'DA193' dur = 11:00 /	! Readback test

! R4
GAP = 3:00 SOURCE = '3C84' dur = 22:00 /

! F5
GAP = 3:00 SOURCE = 'DA193' dur = 22:00 /

! R6
GAP = 3:00 SOURCE = '3C84' dur = 22:00 /       

! F7
GAP = 3:00 SOURCE = 'DA193' dur = 11:00 /       
GAP = 5:00 SOURCE = 'DA193' dur = 11:00 /        ! Readback test

! R8
GAP = 4:00 SOURCE = '3C84' dur = 22:00 /         

! F9
GAP = 4:00 SOURCE = 'DA193' dur = 22:00 /

! R10
GAP = 4:00 SOURCE = '3C84' dur = 22:00 /         

! F11
GAP = 4:00 SOURCE = 'DA193' dur = 11:00 /
GAP = 5:00 SOURCE = 'DA193' dur = 11:00 /	! Readback test

! R12
GAP = 4:00 SOURCE = '3C84' dur = 22:00 /      


! There is room for two more passes on tape, but the scheduled time is over.