Name | Id | Completed | Note |
Programmers | programmers | ||
Brian | BT | ||
Application Support | model | ||
Model to Script | model.toScript | ||
VCI Messaging | model.toScript.vci | 0% | |
Executor Support | model.toScript.executor | 0% | Goal: feed LO and switch settings directly. |
Observation Preparation Tool | opt | ||
Populate Scheduler's Database | opt.oldScheduler | 100% | |
User Help | opt.userHelp | ||
Add Clickable Help | opt.userHelp.clickable | 100% (50%) | |
Scheduling Priorities | opt.schedPriority | 0% (100%) | |
Fix Issues from Testing | opt.fixTest | ||
Fix Issues from Testing (1) | opt.fixTest.round2 | 100% | |
Fix Issues from Testing (2) | opt.fixTest.round3 | 100% | |
Fix Issues from Testing (3) | opt.fixTest.round4 | 100% | |
Fix Issues from Testing (4) | opt.fixTest.round5 | 100% | |
Fix Issues from Testing (5) | opt.fixTest.round6 | 100% | |
Fix Issues from Testing (6) | opt.fixTest.round7 | 0% | |
Fix Issues from Testing (7) | opt.fixTest.round8 | 0% | |
Fix Issues from Testing (8) | opt.fixTest.round9 | 0% | |
Array Configuration | opt.arrayCfg | 0% (100%) | Read-only for observers, unless in test mode. |
Scheduling Block Prerequisites | opt.sbPrereq | 0% (100%) | |
Minimum Elevation Constraint | opt.minElevConstraint | 0% (100%) | For scheduling block. JIRA EVL-747 |
Compatibility with Common Browsers | opt.browsers | 0% | |
Authorization | opt.authorization | ||
Field Access | opt.authorization.micro | 0% | User is permitted to change the value of a particular field. |
Project Access | opt.authorization.macro | 0% | User is permitted to open specific projects. |
Partial Project Load on Start | opt.treeLoad | 75% (0%) | Don't load all project details into tree on project start. |
Links to Useful Resources | opt.outsideLinks | 0% | |
Hardware Configuration Tool | rct | ||
Authorization | rct.authorization | ||
Catalog Access | rct.authorization.macro | 0% | User is permitted to open specific catalogs. |
User Help | rct.userHelp | ||
Create Keys | rct.userHelp.keys | 100% (0%) | |
Add Clickable Help | rct.userHelp.clickable | 100% (0%) | |
Source Catalog Tool | sct | ||
User Help | sct.userHelp | ||
Create Keys | sct.userHelp.keys | 100% | |
Add Clickable Help | sct.userHelp.clickable | 100% | |
Compatibility with Common Browsers | sct.browsers | 0% | |
Authorization | sct.authorization | ||
Field Access | sct.authorization.micro | 0% | User is permitted to change the value of a particular field. |
Catalog Access | sct.authorization.macro | 0% | User is permitted to open specific catalogs. |
Dynamic Scheduler | sched | ||
Redesign Access to Current Database | sched.dbAccess | 50% (100%) | |
Algorithms to Operate on SSS Objects | sched.algSssObj | 20% (71%) | |
Schedule Evaluator to Operate on SSS Objects | sched.algEval | 0% (6%) | |
Generate Execution Blocks | sched.execBlocks | 0% | |
OPT to Scheduler Communication | sched.optSched | 0% | |
Account for Prerequisites | sched.sbPreReq | 0% | |
Update User Interface | sched.ui | 0% | Trouble intersecting w/ EVLA due to java 1.5 vs 1.6? |
Dave | DH | ||
Application Support | model | ||
WIDAR | model.widar | ||
Data Model | model.widar.data | ||
Baseband | model.widar.data.baseband | 80% (100%) | |
Subband | model.widar.data.subband | 80% (100%) | |
Correlation Products | model.widar.data.corrProd | 80% (100%) | |
Baseline Boards | model.widar.data.blbps | 50% (100%) | |
JAXB / XML Schema | model.widar.xml | 75% (100%) | |
Unit Tests | model.widar.unitTest | ||
To / From XML | model.widar.unitTest.xml | 75% (100%) | |
Cloning | model.widar.unitTest.clone | 75% (100%) | |
Hibernate / Database | model.widar.db | 0% (100%) | |
WIDAR Test Programs | model.widar.testPgms | ||
Subband Placement Test Program | model.widar.testPgms.subbandFreq | 100% | |
Integration Time Test Program | model.widar.testPgms.intTime | 0% (100%) | |
Rules | model.widar.rules | ||
Correlation Products | model.widar.rules.corrProd | 0% (100%) | |
Baseband | model.widar.rules.baseband | 50% (100%) | |
Subband | model.widar.rules.subband | 20% (100%) | |
Baseline Board Allocation | model.widar.rules.allocation | 0% (100%) | |
Integration Time | model.widar.rules.intTime | 20% (100%) | |
VCI Messages | model.widar.vci | ||
Station In / Out Message | model.widar.vci.stnInOut | 50% (100%) | |
Other | model.misc | ||
Generate User Classes from XML Schema | model.misc.userXmlToJava | 100% | |
Execution Block | model.misc.execBlock | 0% (100%) | |
Generate Proposal Classes from XML Schema | model.misc.proposalXmlToJava | 0% (100%) | |
Minimum Elevation Constraint | model.misc.minElevConstraint | 100% | For scheduling block. JIRA EVL-745 |
Coordinate Conversion Test Program | model.misc.testCoordConv | 0% (100%) | |
Time Allocated, Scheduled, & Used | model.misc.projTime | 0% | |
Unsubmit Scheduling Block | model.misc.unsubmit | 0% | |
Source Catalog Tool | sct | ||
Text Import / Export | sct.importExport | ||
New Format | sct.importExport.newFormat | ||
Define | sct.importExport.newFormat.define | 0% | |
Implement | sct.importExport.newFormat.implement | 0% | |
Test Existing Feature | sct.importExport.inventory | 0% | |
GBT Formats | sct.importExport.gbt | 0% | |
Graphical View of Nearby Sources | sct.skyCircle | 0% | |
James | JR | ||
Hardware Configuration Tool | rct | ||
General Graphical Structure | rct.structure | 70% (100%) | |
Basebands | rct.baseband | ||
Graphical Tuning | rct.baseband.move | 30% (100%) | |
Pan & Zoom | rct.baseband.panZoom | 30% (100%) | |
Specify Properties | rct.baseband.specify | ||
Simple Properties | rct.baseband.specify.misc | 0% (100%) | E.g. delay model lifespan, single phase center. |
Manual Fine Tuning | rct.baseband.specify.manualTune | 0% (100%) | |
Pulsar Gating | rct.baseband.specify.pulsarGating | 0% | |
Wide Band Correlation | rct.baseband.specify.wbc | 0% | |
Pair & Unpair | rct.baseband.pairing | 0% (100%) | |
Subbands | rct.subband | ||
Add / Remove | rct.subband.addRemove | 100% | |
Graphical Tuning | rct.subband.move | 50% (100%) | |
Pan & Zoom | rct.subband.panZoom | 30% (100%) | |
Copy / Paste | rct.subband.copyPaste | 0% (100%) | |
Specify Properties | rct.subband.specify | ||
Manual Fine Tuning | rct.subband.specify.manualTune | 30% (100%) | |
Simple Properties | rct.subband.specify.misc | 50% (100%) | E.g. mixer phase error correction, signal/noise ratio, stage 2 mixer on/off. |
Tone Extraction | rct.subband.specify.toneExtraction | 0% | |
Burst Mode | rct.subband.specify.burstMode | 0% | |
Radar Mode | rct.subband.specify.radarMode | 0% | |
Pulsar Binning | rct.subband.specify.pulsarBinning | 0% | |
Auto Correlation Mode | rct.subband.specify.autoCorrMode | 0% | |
Phased Array | rct.subband.specify.phasedArray | 0% | |
Correlation Product Groups | rct.subband.corrProdGrp | Specification of a group of correlation products that share recirculation factor and integration timing. | |
Add / Remove | rct.subband.corrProdGrp.addRemove | 0% (100%) | |
Copy / Paste | rct.subband.corrProdGrp.copyPaste | 0% (100%) | |
Specify Properties | rct.subband.corrProdGrp.specify | ||
Simple Properties | rct.subband.corrProdGrp.specify.misc | 0% (100%) | E.g. recirculation factor, packing algorithms. |
Integration Time | rct.subband.corrProdGrp.specify.intTime | 0% (100%) | |
Auto Correlation Subset | rct.subband.corrProdGrp.specify.autoCorrSubset | 0% | |
Correlation Products | rct.subband.corrProdGrp.corrProd | ||
Add / Remove | rct.subband.corrProdGrp.corrProd.addRemove | 0% (100%) | |
Copy / Paste | rct.subband.corrProdGrp.corrProd.copyPaste | 0% (100%) | |
Specify Properties | rct.subband.corrProdGrp.corrProd.specify | 0% (100%) | Polarization product, channel count. |
Baseline Board Allocation | rct.blbps | ||
Display Grid | rct.blbps.display | 0% (100%) | Fetch grid from model and display. |
Auto Update | rct.blbps.indirectUpdate | 0% (100%) | Update model when BB/SB updated, then refetch and display. |
User Allocation | rct.blbps.directUpdate | 0% (100%) | Allow user to say which BLBs a group of products uses. |
Show Subband Info on Hover | rct.blbps.hover | 0% (100%) | |
OSRO VLA Emulation | rct.vlaEmulate | ||
Restrict What User Can Change | rct.vlaEmulate.modTemplate | 0% | |
Compatibility with Common Browsers | rct.browsers | 0% | |
Authorization | rct.authorization | ||
Field Access | rct.authorization.micro | 0% | User is permitted to change the value of a particular field. |
Stephan | SW | ||
Application Support | model | ||
Other | model.misc | ||
Create Project from a Proposal | model.misc.projectFromProposal | 0% (100%) | |
Mirror Proposal Database | model.misc.mirrorProposalDB | 0% | |
Mirror CAS Service | model.misc.mirrorCAS | 0% | |
Observation Preparation Tool | opt | ||
Authentication | opt.authentication | 100% | |
Hardware Configuration Tool | rct | ||
Authentication | rct.authentication | 100% | |
Parminator | parm | ||
User Authentication for Parminator | parm.authentication | 100% | |
User Authorization for Parminator | parm.authorization | 25% (0%) | |
Source Catalog Tool | sct | ||
Authentication | sct.authentication | 100% | |
Text Import / Export | sct.importExport | ||
Support Custom Export Formats | sct.importExport.custom | 0% | |
Proposal to Projects Tool | p2p | ||
Create Administrative User Interface | p2p.userInterface | 0% (25%) | |
Authorization How-To | teachAuth | 0% | Stephan teaches Brian and James about user authorization. |
John | JB | ||
Archive | archive | ||
Archive Query Tool Servlet | archive.queryToolServlet | ||
casapy | archive.queryToolServlet.casapy | 90% (100%) | Build python script and classes that run under casapy |
Authentication | archive.queryToolServlet.authentication | 10% (100%) | Switch to new user authentication provided by OpenSky |
Delivered Data Format | archive.queryToolServlet.dataFormat | 100% | Allow user to select delivered data format - SDM/BDF set, MS, or uvfits |
Single Scan Selection | archive.queryToolServlet.downloadScan | 10% (100%) | Allow user to select individual observing scan to download rather than all data from one execute block |
Mirror aocngas-1 | archive.mirrorHost | 50% (100%) | Configure aocngas-3 to Mirror aocngas-1 |
Install NGAS 4.0 | archive.installNewNGAS | 0% (22%) | Four/five hosts : evlangas-1, newtech-4, aocngas-1, aocngas-2, aocngas-3 |
configure NGAS host clusters | archive.NGASclusters | 10% (100%) | Build three NGAS clusters at AOC and VLA |
EVLA Speed Up | archive.evlaSpeedUp | 10% (0%) | Speed up EVLA to NGAS data rates |
Helpers | helpers | ||
Lorant | LS | ||
Observation Preparation Tool | opt | ||
User Help | opt.userHelp | ||
Content | opt.userHelp.content | 0% | |
Hardware Configuration Tool | rct | ||
OSRO VLA Emulation | rct.vlaEmulate | ||
Create NRAO Templates | rct.vlaEmulate.nraoStd | 0% | |
User Help | rct.userHelp | ||
Content | rct.userHelp.content | 0% | |
Source Catalog Tool | sct | ||
User Help | sct.userHelp | ||
Content | sct.userHelp.content | 0% (100%) | |
Text Import / Export | sct.importExport | ||
New Format | sct.importExport.newFormat | ||
Define | sct.importExport.newFormat.define | 0% |
Version 1.0 - Created on 2009-03-30 09:25 with TaskJuggler v2.2.0